1 |
Anbarasu, M. and Sukumar, S. (2013a), "Effect of connectors interaction in behaviour and ultimate strength of intermediate length Cold Formed Steel (CFS) open columns", Asian J. Civil Eng., 14(2), 305-317.
|
2 |
Anbarasu, M. and Sukumar, S. (2013b), "Study on the effect of ties in the intermediate length cold formed steel (CFS) columns", Struct. Eng. Mech., Int. J., 46(3), 323-335.
DOI
|
3 |
Anil Kumar, M.V. and Kalyanaraman, V (2010), "Evaluation of direct strength method for CFS compression members without stiffeners", J. Struct. Eng., 136(7), 879-885.
DOI
ScienceOn
|
4 |
AS/NZS 4600:2005 (2005), "Australian / New Zealand Standard - Cold Formed Steel Structures".
|
5 |
Davises, J.M. and Jiang, C. (1998), "Design for distortional buckling", J. Construct. Steel Res., 46, 174-175.
DOI
ScienceOn
|
6 |
Hancock, G.J. (1985), "Distortional buckling of steel storage rack column", J. Struct. Eng., ASCE, 111(12), 2770-2783.
DOI
ScienceOn
|
7 |
Kwon, Y.B. and Hancock, G.J. (1992), "Tests of cold formed channel with local and distortional buckling", J. Struct. Eng. ASCE, 118(7), 1786-1803.
DOI
|
8 |
Kwon, Y.B., Kim, B.S. and Hancock, G.J. (2009), "Compression tests of high strength cold-formed steel channels with buckling interaction", J. Construct. Steel Res., 65(2), 278-289.
DOI
ScienceOn
|
9 |
Schafer, B.W. and Pekoz, T. (1998), "Computational modelling of cold-formed steel: characterizing geometric imperfections and residual stresses", J. Construct. Steel Res., 47(3), 193-210.
DOI
ScienceOn
|
10 |
Lau, S.C.W. and Hancock G.J. (1990), "Inelastic buckling of channel columns in the distortional mode", Thin-Wall. Struct., 10(1), 59-84
DOI
|
11 |
Narayanan, S. and Mahendran, M. (2003), "Ultimate capacity of innovative cold-formed steel columns", J. Construct. Steel Res., 59(4), 489-508.
DOI
ScienceOn
|
12 |
North American Specification (NAS) (2007), "Specification for the design of cold-formed steel members", North American Cold-formed Steel Specification, American Iron and Steel Institute, Washington, D.C., USA.
|
13 |
Sukumar, S. Parameswaran, P. and Jayagopal, L.S. (2003), "Behaviour of built-up open cross-sections under axial load", J. Struct. Eng., SERC, India, 30(2) 89-94.
|
14 |
Takahashi, K. and Mizuno, M. (1978), "Distortion of thin-walled open section members", Bulletin Jpn. Soc. Mech. Eng., 21(160), 1448-1458.
DOI
|
15 |
Talikoti, R.S. and Bajoria, K.M. (2005), "New approach to improving distortional strength of intermediate length thin-walled open section columns", Electron. J. Struct. Eng., 5, 69-79.
|
16 |
Theofanous, M. and Gardner L., (2011) "Effect of element interaction and material nonlinearity on the ultimate capacity of stainless steel cross-sections", Steel Compos. Struct., Int. J., 12(1), 73-92.
|
17 |
Veljkovic, M. and Johansson, B. (2008), "Thin-walled steel columns with partially closed cross-section: Tests and computer simulations", J. Construct. Steel Res., 64(7-8), 816-821.
DOI
ScienceOn
|
18 |
Shi, G., Liu, Z., Ban, H.Y., Zhang, Y., Shi, Y.J. and Wang, Y.Q. (2011), "Tests and finite element analysis on the local buckling of 420 MPa steel equal angle columns under axial compression", Steel Compos. Struct., Int. J., 12(1), 31-51.
|