• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.22.1-22.1
• /
• 2011

Two dominant components of polar motion are the Chandler and the annual components. Recently, the existence of 500-day period component in the Earth's polar motion has been manifested. But its existence is not clear on Fourier spectrum. One cause of difficulty involved here is that the amplitudes of the two main components are slightly variable in time by certain amounts (Chandler: 0.15~0.28 arcsec, annual: 0.09~0.15 arcsec). A residual polar motion time series excluding the two main components for a time span between 1962 Jan and 2010 Nov from IERS C04 time series dataset was constructed by least square fitting. For faithful fitting, 43 time segments of 6.8 year length (each starts on January 1st of successive years) were separately acquired and later combined together. The period of dominant peak in the spectrum of this residual polar motion time series is 490 days. Next peaks have their periods as semi-annual, 300~330 days, ~560 days, 670 days, and 1360 days.

• 전자공학회논문지T
• /
• 제36T권1호
• /
• pp.93-102
• /
• 1999

본 논문은 내용 기반 비디오 질의를 위한 데이터 모델과 검색 방법을 제안한다. 하나의 비디오를 같은 길이의 프레임(frame)들의 집합 즉 비디오-윈도우로 나눈 후에 각각의 비디오-윈도우를 다차원 공간의 한 점으로 사상시킨다. 인접한 비디오-윈도우를 연결하면 하나의 비디오는 다차원 공간에서의 하나의 궤적(trajectory)이된다. 두 비디오-윈도우의 유서성은 두 점의 유클리디안 거리로 정의되며, 비디오 단편(segment)의 유사성 비교는 궤적을 비교함으로써 검사한다. 여과(filtering), 정제(refinement)과정을 가지는 새로운 검색 방법을 개발한다. 새로운 검색 방법을 여과/정제 과정이 없는 질의 결과가 정확하고, 질의 처리 속도는 약 4.7배 향상되었다.

• 터널과지하공간
• /
• 제11권4호
• /
• pp.311-318
• /
• 2001

RQD는 암반의 파쇄정도를 평가하고 암반분류의 변수로서 중요하나 이방성 및 산정길이에 따른 오차를 내포하고 있다. 따라서 보다 정확하게 토목시공 대상암반의 RQD를 평가하기 위해서는 3차원공간에서치 RQD 변화특성을 파악하는 것이 중요하다. 본 연구에서는 등각평사투영망상에 RQD의 3차원적 분포를 도시하고 산정길이와 절리빈도에 따른 RQD의 오차 정도를 파악하고자 하였으며 이후 설계과정에서의 영향을 검토하고 또한 이를 국내현장에 적용하여 보았다. 이러한 시도는 지질조사 결과를 보다 정확하게 설계 및 시공에 반영하고 이후 시공과정에서의 지질조사에도 적용할 수 있을 것으로 기대된다.

• 대한치과교정학회지
• /
• 제17권1호
• /
• pp.33-45
• /
• 1987

This study was designed to examine relations between posture and size of the tongue and dentoalveolar pattern. The sample was consisted of three groups, the 34 subjects of Normal occlusion, the 31 subjects of Bimaxillary protrusion and the 31 subjects of Class III malocclusion. On the cephalograms, lengths, heights and areas of the tongue and intermaxillary space and on the study model, arch length, intercanine width, intermolar width and palatal height were measured. These data from measuring cephalograms and models were statistically analyzed. The results of the study were as follows; 1. Length of the tongue was the greatest in Bimaxillary protrusion and in order of Normal occlusion and Class III malocclusion. 2. Posture of the tongue was the lowest in Class III malocclusion and in order of Bimaxillary protrusion and Normal occlusion. 3. There were a tendency to be larger area of tongue and intermaxillary space in Class III malocclusion compared to Normal occlusion and Bimaxillary protrusion. 4. Size of the tongue and intermaxillary space showed low correlations with the dentoalveolar pattern.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1008-1013
• /
• 2006

Ground anchor method is widely used in the large scale deep excavation of urban area to support a retained wall. Excavation using the ground anchor as a supporting system near a building have many difficulties due to the limitation of construction space. This method can not be applied to the site with the insufficient space from the retained wall to the boundary line. In this case, soil improvement at the anchor bond zone can be used to secure the frictional resistance of ground anchor within the boundary. Through this method, the bond length of anchor can be shortened considerably. This paper deals with the case study on the ground excavation adjacent to a building. The object field is Yongsan Park Tower Construction Site. In this site, the enlarged anchor with soil improvement was applied to solve the problem due to the limitation of construction space. According to the results of field test and monitoring, the anchor with soil improvement is very effective to secure the frictional resistance at the anchor bond zone.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.218-219
• /
• 2008

A gas-liquid centrifugal separator is widely used in industry because of its simple geometry and little maintenance. Also, these separators have considerable advantages over filters, scrubbers or precipitators in term of compact design, low pressure drop and higher capacity. A gas-liquid centrifugal separator is a device that utilizes centrifugal force and low pressure to separate liquid from gas by density difference. Design parameters such as length of separation space, swirl vane exit angle, inlet to outlet pipe diameter ratio, models for separation efficiency and low pressure drop as a function of physical dimension are not available in literature. In present study, length of separation space (from vane to gas exit opening) has been studied using CFD. The 3-D Navier-Stokes equations are numerically solved using a fully implicit finite volume scheme. Based upon the obtained solutions, tangential velocities, centrifugal forces, vortices and total pressure losses are analyzed to find the best design parameters.

• 대한수학회논문집
• /
• 제10권4호
• /
• pp.975-980
• /
• 1995

We suggest an improvement of the algorithm in [2] for calculating the transient solutions for continuous time Markov chain with countable state space.

• 태양에너지
• /
• 제17권2호
• /
• pp.23-33
• /
• 1997

This paper reviews the advanced solar cell structures used in space. These are the structures which incorporate the back surface field and reflectors with very shallow and lightly doped emitters. Their use in space has shown that the thinner cells are more resistive to radiation damage than the thicker ones. It has been found that the charged particles affect both the surface and bulk of the cells used in space. This causes degradation in the output power, which in effect, can be explained by the degrading diffusion length of the cells. The PERL cells showed higher BOL(beginning of life) efficiency and almost the same EOL(end of life) efficiency as structures with wrap-around contact configuration fabricated on 10 ${\Omega}cm$ resistivity substrates. This observation lead to a conclusion that, the space cells do not necessarily need to have very high BOL efficiency except in specific missions which require such.

• 대한수학회보
• /
• 제54권6호
• /
• pp.2001-2011
• /
• 2017

In 1997, H. Li [12] proposed a conjecture: if $M^n(n{\geqslant}3)$ is a complete spacelike hypersurface in de Sitter space $S^{n+1}_1(1)$ with constant normalized scalar curvature R satisfying $\frac{n-2}{n}{\leqslant}R{\leqslant}1$, then is $M^n$ totally umbilical? Recently, F. E. C. Camargo et al. ([5]) partially proved the conjecture. In this paper, from a different viewpoint, we study closed convex spacelike hypersurface $M^n$ in locally symmetric Lorentz space $L^{n+1}_1$ and also prove that $M^n$ is totally umbilical if the square of length of second fundamental form of the closed convex spacelike hypersurface $M^n$ is constant, i.e., Theorem 1. On the other hand, we obtain that if the sectional curvature of the closed convex spacelike hypersurface $M^n$ in locally symmetric Lorentz space $L^{n+1}_1$ satisfies $K(M^n)$ > 0, then $M^n$ is totally umbilical, i.e., Theorem 2.

• 대한수학회보
• /
• 제51권4호
• /
• pp.957-964
• /
• 2014

In this paper, we prove that there is no branch point in the Lorentz space (M, d) which is the limit space of a sequence {($M_{\alpha},d_{\alpha}$)} of compact globally hyperbolic interpolating spacetimes with $C^{\pm}_{\alpha}$-properties and curvature bounded below. Using this, we also obtain that every maximal timelike geodesic in the limit space (M, d) can be expressed as the limit curve of a sequence of maximal timelike geodesics in {($M_{\alpha},d_{\alpha}$)}. Finally, we show that the limit space (M, d) satisfies a timelike triangle comparison property which is analogous to the case of Alexandrov curvature bounds in length spaces.