• Journal of the Korean Society for Railway
• /
• v.4 no.2
• /
• pp.71-77
• /
• 2001

Standardization EMU in comparison with the existing EMU has been largely changed the material and section profile of the structure as the Aluminium made. This study is analytically predicted the influence of inner noise in tunnel running when the above change is made.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.273-273
• /
• 2012

Grid type의 DuoPIGatron 이온원 인출구 형상을 변경하여 이온빔 인출 특성 변화를 연구하였다. 이온원의 인출구는 직경 $6{\Phi}$ 원형구멍을 이용하였으며, 각각의 개수가 1개/3개/11개일 때 빔 인출조건을 변화시켜 빔 프로파일을 비교하였다. 인출구 구멍개수가 11개 조건의 실험에서, 최대 $475{\mu}A/cm^2$의 전류밀도를 가지는 대면적의 이온빔이 인출되었다.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.71-74
• /
• 1995

A numerical model capable of simulating a 2-D airfoil flying over in the vicinity of the waves is discussed. Instead of treating the problem as a heaving oscillation one above the rigid flat wall, sources are distributed on the prescribed wave profile. The wave deformation due to the airfoil is assumed to be negligible and treated as a rigid undulated wall. The source and vortex are distributed on the surface of the foil. It is found that the variation of $C_L$ with wave steepness in severe and that the lift variation due to waves decreases as the wing height above the water surface increases.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.4
• /
• pp.260-264
• /
• 2010

In this paper, Ni silicide is formed on boron cluster ($B_{18}H_{22}$) implanted source/drains for shallow junctions of nano-scale CMOSFETs and its thermal stability is improved, using vacuum annealing. Although Ni silicide on $B_{18}H_{22}$ implanted Si substrate exhibited greater sheet resistance than on the $BF_2$ implanted one, its thermal stability was greatly improved using vacuum annealing. Moreover, the boron depth profile, using vacuum post-silicidation annealing, showed a shallower junction than that using $N_2$ annealing.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.79-87
• /
• 2004

The light pattern reflected from a machined surface contains some information like roughness and profile on the projected surface as expected in the Beckmann-Spizzichino model. In applying the theory into a real reliable measuring device, many parameters such as incident light power, wave length, spot size should be kept a constant optical value. However, the reflected light power is likely to change with the environmental noise, the variations of the light source, the reflectivity of the surface, etc. even though the incident light power is constant. In this study, a method for adjusting the incident light power to keep the reflected light power projected on a CMOS image sensor constant was proposed and a simple adjustment algorithm based on PI digital control was examined. Experiments verified that the proposed method made the surface roughness measurement better and more reliable even under variations of the height of light source.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.3
• /
• pp.7-11
• /
• 2003

In this research, the etching characteristics of via contact and deep contact hole have been studied using multi-pole inductively coupled plasma(MICP) etching system. We investigated Plasma density of MICP source using the Langmuir probe and etching characteristics with RF frequency, wall temperature, chamber gap, and gas chemistry containing Carbon and Fluorine. As the etching time increases, formation of the polymer increases. To improve the polymer formation, we controlled the temperature of the reacting chamber, and we found that temperature of the chamber was very effective to decrease the polymer thickness. The deep contact etch profile and high selectivity(oxide to photoresist) have been achieved with the optimum mixed gas ratio containing C and F and the temperature control of the etching chamber.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4B
• /
• pp.556-564
• /
• 1999

The analysis on heat fluxed on and transmission efficiencies by the collimators of neutral beam injection lines in KSTAR tokamak device has been carried out. And a mathematical model describing non-Gaussian beam distribution profile has been established. A neutral beam injection device is composed of 3 separate ion sources and corresponding beam transport lines, which deal with 7.8 MW of beam power, respectively. The divergence angles of ion beam are $1.2^{\circ}$and $0.5^{\circ}$, in vertical and horizontal directions, respectively. The maximum normal heat load on source exit scraper is 9.1 kW/$\textrm{cm}^2$ and net beam transmission efficiency is ~28%. The effect of misalignment of ion source and scrapers on the scraper heat load and beam transmission also has been analyzed.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.55.4-55.4
• /
• 2016

We observed 10 Class I sources as part of the IGRINS (Immersion GRating INfrared Spectroscoph) Legacy Program, "IGRINS Survey of Protoplanetary Disks (PI: Jeong-Eun Lee)". Unlike other Class I sources, IRAS 16316-1540 shows broad absorption features in the near-infrared spectra (H and K bands). The broadened absorption features have been detected toward FU Orionis-type objects. Boxy or double-peaked absorption profiles can be produced by a Keplerian disk that has the hot mid-plane heated by a burst mass accretion. We could fit the broad absorption features of IRAS 16316-1540 with a K5 V template stellar spectrum convolved with a disk rotation profile of 45 km s-1. Therefore, rotationally broadened absorption features detected in this Class I source suggest that the episodic accretion process occurs from the early stage of star formation.

• New & Renewable Energy
• /
• v.5 no.1
• /
• pp.40-46
• /
• 2009

Optimization of a rectangular profile annular fin with variable pipe inside radius is presented. This optimum procedure is based on fixed fin height and is made by using variables separation method. The optimum heat loss, corresponding optimum fin length and optimum fin efficiency are presented as a function of pipe inside radius, fin half height, inside fluid convection characteristic number and ambient convection characteristic number. One of results shows that the optimum fin length increases linearly with increase of pipe inside radius for fixed fin height and fin base radius.

• International Journal of Safety
• /
• v.9 no.1
• /
• pp.1-5
• /
• 2010

On-site examinations and fire simulation were carried out to speculate on causes of the fire at an indoor shooting range in Busan. An experiment on the ignitability of unburned gunpowder was also conducted. Cigarette was the most likely source of ignition for the fire, while impact of a stray bullet failed to ignite the unburned gunpowder. The explosion in the shooting area was presumed to be caused by violent combustion of the polyurethane foam and unburned gunpowder accumulated on it. Fire safety measures include prohibit of use of profile polyurethane foam, complete clean-up of unburned gunpowder, and removal of steel components from the bullet trap.