• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.6
• /
• pp.810-817
• /
• 2011

A feeding trial was conducted to study the effect of tannin rich Pakar (Ficus infectoria) leaves on microbial profile, rumen fermentation and nutrient utilization in goats. Eight goats divided in two groups were fed pakar leaves (experimental group) and green oats (control group) as sole roughage source along with a fixed quantity of concentrate mixture for a period of 3 months. Two metabolic trials of six days duration were conducted after 30 and 90 days of experimental feeding. The dry matter intake was significantly higher (p<0.05) and digestibility's of DM, OM, CP, EE, NDF and ADF were reduced in experimental as compared with the control group. The TDN intake was similar (236.52 vs. 240.39 g/d) in both the groups. All the animals were in positive nitrogen balance. The concentration of ammonia nitrogen, TVFA, lactic acid and activities of xylanase and protease were reduced in pakar leaves fed goats. The rumen microbial profile as obtained by MPN technique showed no change in total bacterial population but total fungi and cellulolytic bacteria were reduced (p<0.05), whereas, tannin degrading/tolerant bacteria increased with the feeding of pakar leaves. Real time PCR data revealed a decrease in Ruminococcus flavefaciens, an increase in methanogens and no change in the Fibrobacter succinogenes population by feeding of pakar leaves.

• Journal of KIISE
• /
• v.41 no.12
• /
• pp.1117-1125
• /
• 2014

Folksonomy data, which is derived from social tagging systems, is a useful source for understanding a user's intention and interest. Using the folksonomy data, it is possible to create an accurate user profile which can be utilized to build a personalized search system. However there are limitations in some of the traditional methods such as Vector Space Model(VSM) for user profiling and similarity computation. This paper suggests a novel method with graph-based user and document profile which uses the proximity information of query terms to improve personalized search. We demonstrate the performance of the suggested method by comparing its performance with several state-of-the-art VSM based personalization models in two different folksonomy datasets. The results show that the proposed model constantly outperforms the other state-of-the-art personalization models. Furthermore, the parameter sensitivity results show that the proposed model is parameter-free in that it is not affected by the idiosyncratic nature of datasets.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.355-360
• /
• 2008

The complicated embedded system for multi-tasking requires RTOS(real-time operating system). It uses the optimal OS and processor to each embedded system on the heterogeneous development environment. This paper is proposed to use UML profile of OS API and Processor Configuration, instead of cross-compiling for developing the heterogeneous embedded system. This reduces the development time and cost through generating the automatic source code with the profile information of each embedded system. We generate and port the code after modeling the two heterogeneous real time operating systems (brickOS and uC/OS-II) and the processors (Hitachi H8 and Intel PXA255) with our proposed profile of the heterogeneous embedded system.

• Korean Journal of Veterinary Research
• /
• v.44 no.1
• /
• pp.89-98
• /
• 2004

This study was carried out to investigate the serotype, and antimicrobial susceptibility and analyze the plasmid profile for the 145 isolates of L. monocytogenes isolated from livestock products and these product processing plants in Gyeongnam, Korea. All of L. monocytogenes strains belonged to serotype 1/2b (57.9%), 1/2a (20.0%), 4b (11.4%), 1/2c, 3b, 4c (each 2.9%) and 4d (0.7%). Serotype 1/2b, 1/2a, 4b from each source were found predominantly. Serotype 1/2b was predominantly higher than other serotype, and there was no significant difference between serotypes isolated from livestock products and product processing plants. 4b was major serotype isolated from raw milk and pork, and serotypes isolated from beef, chickens and slaughterhouse were 1/2b and 1/2a. The susceptibility of 145 strains of L. monocytogenes to 14 antibiotics commonly used in veterinary and human therapy was determined by disk diffusion method. All of L. monocytogenes strains were susceptible to amikacin, ampicillin, cephalothin, chloramphenicol, gentamicin, kanamycin, neomycin and penicillin. L. monocytogenes strains had the highest resistance with colistin (100%), oxytetracycline (44.8%), tetracycline (43.4%) followed by erythromycin (2.8%), spectinomycin (1.4%) and streptomycin (0.7%). Tetracycline resistance, and serotype distribution of the isolates from sample sources were significantly different. Resistance to at least one antibiotic was observed in all of them and 7 different resistant profiles were recorded. The most common resistance pattern were CL-OTC-TC (colistin-oxytetracycline-tetracycline) (42.8%). Among all tested isolates, two different plasmid profiles were observed. Of the 97 examined strains, 14 (14.4%) contained either the 8 and 11 kb plasmid or the 11 kb.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.5
• /
• pp.389-395
• /
• 2005

The etching technology of the high aspect ratio contact(HARC) is necessary at the critical contact processes of semiconductor devices. Etching the $SiO_{2}$ contact hole with the sub-micron design rule in manufacturing VLSI devices, the unexpected phenomenon of 'profile tilting' or 'bottom distortion' is often observed. This makes a short circuit between neighboring contact holes, which causes to drop seriously the device yield. As the aspect ratio of contact holes increases, the high C/F ratio gases, $C_{4}F_{6}$, $C_{4}F_{8}$ and $C_{5}F_{8}$, become widely used in order to minimize the mask layer loss during the etching process. These gases provide abundant fluorocarbon polymer as well as high selectivity to the mask layer, and the polymer with high sticking yield accumulates at the top-wall of the contact hole. During the etch process, many electrons are accumulated around the asymmetric hole mouth to distort the electric field, and this distorts the ion trajectory arriving at the hole bottom. These ions with the distorted trajectory induce the deformation of the hole bottom, which is called 'profile tilting' or 'bottom distortion'. To prevent this phenomenon, three methods are suggested here. 1) Using lower C/F ratio gases, $CF_{4}$ or $C_{3}F_{8}$, the amount of the Polymer at the hole mouth is reduced to minimize the asymmetry of the hole top. 2) The number of the neighboring holes with equal distance is maximized to get the more symmetry of the oxygen distribution around the hole. 3) The dual frequency plasma source is used to release the excessive charge build-up at the hole mouth. From the suggested methods, we have obtained the nearly circular hole bottom, which Implies that the ion trajectory Incident on the hole bottom is symmetry.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.139-145
• /
• 2010

An integrity testing for stone columns was attempted using crosshole S-wave logging. The method is conceptionally quite similar to the crosshole sonic logging (CSL) for drilled piers. The critical difference in the logging is the use of S-wave rather than P-wave, which is used in CSL, because swave is the only wave sensing the stiffness of slower unbounded materials than water. An electro-mechanical source, which can generate reversed Swave signals, was utilized in the logging. The stone column was delineated using the S-wave travel times across the stone column, the S-wave velocity profile of the crushed stone($V_{cs}$-profile) and that of surrounding soil($V_s$-profile). In the calculation of $V_{cs}$-profile of the crushed stone, its friction angle and Ko (coefficient of lateral earth pressure at rest) are recommended to be used. The calculation of the column diameter is not much affected by the values of friction angle and Ko.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.251-257
• /
• 2000

A numerical simulation of the temperature rise for sliding surface in dry contact is based on Jaeger's formula combined with a calculated heat input. A gear tooth temperature analysis was performed. The pressure distribution has the Hertzian pressure distribution on the heat source. The heat partition factor is calculated along line of action. A Temperature distribution of tooth surface is calculated about before and after profile modification. A Temperature of addendum and deddendum in modified gear have reduced.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.331-337
• /
• 2001

A numerical simulation of the temperature rise for sliding surface in dry contact is based on Jaegers formula combined with a calculated heat input. A gear tooth temperature analysis was performed. The pressure distribution has the Hertzian pressure distribution on the heat source. The heat partition factor is calculated along ling of action. A Temperature distribution of tooth surface is calculated about before and after profile modification. A Temperature of addendum and deddendum in modified gear have reduced.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4E
• /
• pp.65-71
• /
• 1996

In shallow water with a thermocline, the characteristics of sound propagation strongly depend on the signal frequency. When only one of the source and the receiver is above the themocline, it is known that the intensity of the received signal changes largely and almost periodically as the signal frequency varies. This is the so-called channel resonance. By using the ray-mode approach, the formula relating the resonance frequency and the sound speed profile is obtained, and the resonance phenomenon is analyzed. Also this analysis is verified by numerical calculation.

• Journal of the Korean Society for Railway
• /
• v.4 no.2
• /
• pp.71-77
• /
• 2001

Standardization EMU in comparison with the existing EMU has been largely changed the material and section profile of the structure as the Aluminium made. This study is analytically predicted the influence of inner noise in tunnel running when the above change is made.