• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3E
• /
• pp.87-89
• /
• 2005

The acoustical sources of intake and exhaust systems in fluid machines are often characterized by the source impedance and strength using linear frequency-domain modeling. In the case of the sources which are nonlinear and time-variant, however, the source parameters were sometimes incorrectly obtained. In this paper, the source model and direct measurement technique are modified in order to evaluate the effect due to nonlinear and periodically time-varying source character as well as the linear property of the reflectivity of in-duct fluid machine source. With a priori known kinematical information of the source, the types of nonlinear time-variant terms can be presumed by a simple physical model, in which there is practically no restriction on the form of the model. The concept of source impedance can be extendable by introducing the linear frequency response function for each nonlinear or time-variant input. Extending the conventional method and adapting the reverse MISO technique, it is possible to develop a direct method that can deal with the nonlinear time-variant source parameters. The proposed direct method has a novel feature that there is no restriction on the probability or spectral natures of the excited sound pressure data. The present method is verified by the simulated measurements for simplified fluid machines. It is thought that the proposed method would be useful in predicting the insertion loss or the radiated sound level from intake or exhaust systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.441-446
• /
• 2008

The source transfer receiver model ('Source $\times$ Transfer = Response' model) which is widely used by NVH development process of vehicle/transport/machinery to analyze effectively and manage efficiently the structural dynamic behavior is also applicable to construction structure. If the evaluation assessment of the vibration level does not meet the target level, there are two methods, one is source treatment or replacement and the other is the reduction treatment on the transfer structure. In case of source treatment, it is done by source supplier and so, the latter is more practical method to reduce the vibration level. In this study, in order to get the accurate Transfer FE model(floor structure FE model), Experimental modal analysis of part of floor structure and FEM modal analysis of full floor structure are performed, then updating of FE model is performed after correlation analysis between these two results and finally, the modal model and FRF are compared between FE and Experimental results.

• Journal of the Korean Institute of Gas
• /
• v.4 no.2 s.10
• /
• pp.15-19
• /
• 2000

This study compared and analyzed existing research on dispersion models and selected the EPA's Industrial Source Complex(ISC) model as a model suitable for the domestic petrochemical industry for 3-dimensional simulation and developed a simulation system applying. 3-dimensional algorithm with this ISC dispersion model as a basis As a result of this study, the 3D dispersion model based on ISC can help estimate a exact accident damage zone, make a emergency plan and control a ignition source.

• Speech Sciences
• /
• v.3
• /
• pp.132-147
• /
• 1998

Previously developed methods for pitch modification have not been based on the voice source model. Therefore, the synthesized speech often sounds unnatural although it may be highly intelligible. The purpose of this paper is to analyze the alteration of a voice source signal with pitch period and to establish the pitch-modification rule based on the result of this analysis. We examine the alteration of the interval of closing phase, closed phase and open phase using the excitation waveform as the pitch increases. In comparison to the previous methods which performed directly on the speech signal, the pitch modification method based on a voice source model shows high intelligibility and naturalness. This study might benefit the application to the speaker identification and the voice color conversion. Therefore the proposed method will provide high quality synthetic speech.

• Nuclear Engineering and Technology
• /
• v.30 no.3
• /
• pp.235-244
• /
• 1998

The parametric model method determines the accident source term which is Presented by a set of source term parameters. In this method, the cumulative distribution of each source term parameter should be derived for its uncertainty analysis. This paper introduces a method of generating the parameters in the form of cumulative distribution using MAAP version 4.0. In MAAP, there are model parameters which could incorporate uncertain physical and/or chemical phenomena. In general, the model parameters do not have a point value but a range. In this paper, considering that, the input values of model parameters influencing each parameter are sampled using LHS. Then, the computation results are shown in cumulative distribution form. For a case study, the CDFs of FCOR and WES of Kori Unit 1 are derived. The target scenarios for the computation are the ones whose initial events are large LOCA, small LOCA and transient, respectively. It is found that the computed CDF's in this study are consistent to those of NUREG-1150 and the use of MAAP is proven to be adequate in assessing the parameters of the severe accident source term.

• Journal of Environmental Impact Assessment
• /
• v.20 no.1
• /
• pp.25-36
• /
• 2011

In this study, the accurate water quality analysis in rivers, including the non-point source is performed. First of all, watershed model, SWAT(Soil and Water Assessment Tool) was applied to analyze the impact of the non-point source in study area. And then, water quality analysis integrating the point source and the non-point source is implemented using QUALKO model. For more exact simulation, it should be the calibration and verification of variables and parameters which are needed for simulation. In addition, the importance of considering the non-point source was confirmed in river water quality simulation. BOD, TN, TP were analysed, and the results shows that BOD, TN and TP concentration was increased to 16.8%, 8.2% and 25.8% respectively. The more accurate estimate will be carried if use of reliable measurements and watershed simulation be done in models linking process. The suggested technique will improve the accuracy of the water quality analysis. The methodologies presented in this study will contribute to basin-wide water quantity and quality management.

• Journal of Mechanical Science and Technology
• /
• v.16 no.9
• /
• pp.1054-1064
• /
• 2002

Numerical prediction of welding-induced residual stresses using the finite element method has been a common practice in the development or refinement of welded product designs. Various researchers have studied several thermal models associated with the welding process. Among these thermal models, ramp heat input and double-ellipsoid moving source have been investigated. These heat-source models predict the temperature fields and history with or without accuracy. However, these models can predict the thermal characteristics of the welding process that influence the formation of the inherent plastic strains, which ultimately determines the final state of residual stresses in the weldment. The magnitude and distribution of residual stresses are compared. Although the two models predict similar magnitude of the longitudinal stress, the double-ellipsoid moving source model predicts wider tensile stress zones than the other one. And, both the ramp heating and moving source models predict the stress results in reasonable agreement with the experimental data.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.542-545
• /
• 2013

State-of-the-art voice codecs have been developed to extend the input bandwidth to enhance quality while maintaining interoperability with a legacy codec. Most of them employ a modified discrete cosine transform (MDCT) for coding their extended band. We propose a source filter model-based coding algorithm of MDCT spectral coefficients, apply it to the ITU-T G.711.1 super wideband (SWB) extension codec, and subjectively test it to validate the model. A subjective test shows a better quality over the standardized SWB codec.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2E
• /
• pp.24-30
• /
• 1999

In this paper, we propose a weighting dependent mixed source model (WD-MSM) coder that is an improved version of a CELP-based mixed source model (C-MSM) coder. The coder classifies speech segments into three types : voiced, unvoiced and mixed. The excitation for a voiced frame is an adaptive source, and the excitation for an unvoiced frame is a stochastic source. The coder has a modified mixed source for a mixed frame. We apply different weighting functions for three classes. Simulation results show that the proposed coder at 4 kbits/s yields very good performance both subjectively and objectively.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.703-705
• /
• 1999

In this paper, we introduce the direction of arrival(DOA) estimation of distributed signal based on the improved ESPRIT algorithm. Most research on the estimation of DOA has been performed based on the assumption that the signal sources are point sources. However, we consider a two-dimensional distributed signal source model using improved ESPRIT algorithm. In the distributed signal source model, a source is represented by two parameters, the azimuth angle and elevation angle. We address the estimation of the elevation and azimuth angles of distributed sources based on the parametric source modeling in the three-dimensional space with two uniform linear arrays. The array output vector is obtained by integrating a steering vector over all direction of arrival with the weighting of a distributed source density function. We also develop an efficient estimation procedures that can reduce the computational complexity. Some examples are shown to demonstrate explicity the estimation procedures under the distributed signal source model.