• Journal of the Korean Operations Research and Management Science Society
• /
• v.27 no.3
• /
• pp.41-57
• /
• 2002

In this paper, I investigate the impact of quality management activities on the public sector within the framework of Malcolm Baldrige (MB) national qualify model. The Structural Equation Modeling approach has been employed to investigate the cross influences among the seven MB categories. This empirical study shows that a number of statistical hypotheses are significant. The leadership category is the most important driver among the quality management activities. This, in turn, implies that the main source in quality management is to foster a solid qualify oriented leadership system. Categories such as Information Analysis, Strategic Planning, Human Resource Development and Management, and Process Management are significantly related to the Customer Satisfaction category. In addition, leadership, Information Analysis, and Customer Satisfaction categories ere significantly influential to Management Performance.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.295-299
• /
• 2007

Biped robot requires that an energy source and a control part should be installed on the body to realize active system. So, we choose the DC motor having high torque in compact size in this study. In the DC motor serve system, we choose power amplifier with analog configuration, developed the module combined the controller and the driver. We applied this module to robot actuator and studied the response characteristics in an action and a return. Main controller with serve system, loading PIC micro controller, can be load on the robot with light weight.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.308-311
• /
• 2004

A novel single-stage power factor corrected (PFC) drive for switched reluctance motor (SRM) is presented to achieve sinusoidal, near unity power factor input current. The proposed PFC SRM drive has no additional active switch. And a single-stage approach, which combines a DC link capacitor used as do source and a drive used for driving the motor into one power stage, has a simple structure and low cost. The characteristics and validity of the proposed circuit will be discussed in depth through the experimental results.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.201-202
• /
• 2012

This paper presents design and implementation of the PCU(150 kVA 3-Phase PWM Inverter for Electric Vehicles). For Implementation of the PCU, it is consist with Case, Connectors, IGBT module for PWM switching, DC-capacitor for dc-source, resolver for sensing of speed & position, and PCB board for control & gate-driver. Also, for the purpose of stable operation of the PCU in vehicle with variable torque condition in motor, current control scheme based on torque-map are developed. According to real-car test mode, the prototype of proposed the PCU is verified with performance and stability. Thus, design and implement of the PCU are discussed, and experimental results are presented in this paper.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.567-570
• /
• 1989

A constant V/F control system of voltage contrlled PWM inverter has a unstable operation of the low- speed and the light-load. In this paper, the authors propose stability control with idealized operation of induction motor by the neglect of primary leakage inductance and resistance. Also ldealized operation system is adopted voltage error, feed back impedance circuit, and increasing resistance from dead time of switching is compensated by the soft ware with u-processors. The proposed simulation of the idealized control method is proved at the low-speed operation for three phase induction motor.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.232-235
• /
• 2000

Design and experiments of a nondestructive system to inspect deterioration of ACSR-OC (ACSR Outdoor Cross-linked Polyethylene Insulated Wire usually used in HV overhead distribution lines presented in this paper. ACSR-OC conductor built to pollutants air for a long period would be easily progress to corrode so that it may lead to the reduction of the effective cross section area of conductors. A fault diagnosis system consisting of a solenoid sensor, a constant current source with RF frequency signal processing unit and a motor driver/controller designed and implemented. This instrument can dot the sensor output variation due to deterioration corrosion, continuously. As a result, it was shown such corrosion detector can readily be utilized estimating the diameter change due to deterioration overhead distribution lines and in giving an warning or inform before severe aged conductor lead to fail.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.424-425
• /
• 2010

가시광 무선통신 시스템은 LED 전류를 데이터 신호에 따라 제어하여, 기존의 LED 조명장치를 통신 수단으로 사용 가능하기 때문에 차세대 통신 수단으로 주목 받고 있다. 본 논문에서는 이러한 가시광 무선통신 시스템을 위한 전류원 구동 LED 드라이버를 제안한다. 제안된 LED 드라이버는 컨버터의 전류원을 이용하고 LED와 병렬 연결된 스위치 소자를 스위칭 구동방식으로 제어함으로써, 기존의 선형 구동방식보다 전력손실 및 발열을 크게 개선하여 대용량의 LED 조명장치에 적용할 수 있는 장점이 있다. 제안 회로의 가시광 무선통신 시스템 구현을 통해 제안된 LED 드라이버의 우수성 및 이론적 해석의 타당성을 검증한다.

• Journal of Information Technology Services
• /
• v.9 no.1
• /
• pp.173-197
• /
• 2010

Though service is recognized as not only a new driver for economy growth but also a source for sustainable value creation, it has been misunderstood in the literatures because of traditional characteristics of service such as inseparability, heterogeneity, intangibility, and perishability. This perspective can be a cause of barrier to approach a service. The purpose of this study is to develop and validate an instrument to measure of the service process. A series of statistical procedures were used to analyze the data, which proved that the instrument is valid and reliable. This study makes a contribution to both academic research and management practice. Theoretically, this study provides a measurement of service process in organizations for identifying service process. In practice, the results of this study will help organizations evaluate their service process innovation.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.609-612
• /
• 2002

In this paper, a 12-bit 100-MHz CMOS current steering digital-to-analog converter is designed. In the D/A converter, a driver circuit using a dynamic latch is implemented to obtain low glitch and thermometer decoder is used for low DNL errors, guaranteed monotonicity, reduced stitching noise. And a threshold voltage-compensated current source. The D/A converter is designed with 0.35-$\mu m$ CMOS technology at 3.3 V power supply and simulated with HSPICE. The maximum power dissipation of the designed DAC is 143 mW.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.212-222
• /
• 1992

To use polycrystalline Si Thin Film Transistor (poly-Si TFT) in high density SRAM instead of High Load Resistor (HLR), TFT is needed to show good electrical characteristics such as large carrier mobility, low leakage current, high driver current and low subthreshold swing. To satisfy these electrical characteristics, the trap state density must be reduced in the channel poly. Technological issues pertinent to the channel poly fabrication process are investigated and discussed. They are solid phase growth (SPG), Si-ion implantation, laser annealing and hydrogenation. The electrical properties of several CVD oxides used as the gate oxide of TFT are compared. The dependence of the electrical characteristics of TFT on source-drain ion-implantation dose, drain offset length and dopant lateral diffusion are also described.