• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.1
• /
• pp.97-103
• /
• 2016

The sensitivity of interior noise that the passengers perceive is comparatively high in the train, and structure-borne and air-borne types of noises come into the train. In this paper, to analyze contributions of these noise sources operational transfer path analysis(OTPA) is used. OTPA has some advantages of executing the contribution rates of several sources simultaneously, and in this work, 29 points are measured while running. Transfer functions between reference measurement points and response measurement points are calculated by the singular value decomposition(SVD) and Principal component analysis(PCA) method, and the frequency characteristics of the noise source are successfully derived. Also the interior noise is predicted and compared with measurement data to show the reliability.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.5
• /
• pp.528-535
• /
• 2016

The vibration of a ship gives a significant effect on the noise radiated into the water. This paper focused on the vibration of ship hull due to the sub-generator located on the deck in the anchored condition. The contributions of the transfer paths between sub-generator and ship hull were analyzed using the TPA and the OTPA method. While the sub-generator was operation and the main engine was turned off, the vibrations were measured simultaneously at the 38 locations of the ship and the one hydrophone was arranged to measure the underwater radiated noise at the overside ship. The results of the transfer path by applying TPA and OTPA were compared and discussed. As a result of these methods, the top of stovepipe and valve are contributive. Reinforcing these structures is the most effective to reduce the vibration of ship hull.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.12
• /
• pp.1254-1261
• /
• 2007

The structure has several types of noise and booming noise of a vehicle is usually caused by the vibration of the vehicle's body transmitted from the engine through the mounting system. Vector synthesis analysis is performed to predict the booming noise when the characteristic of the engine mounting system is changed., i.e., when magnitudes and phases of vibratory forces after the mounts are altered. To use this method effectively, the concept of Multi-dimensional-analysis and Experimental Design are introduced to identify the contributions of each vibration sources and transmission paths to interior noise. It was used 3inputs/1output system and found the magnitudes and phases of the forces for minimizing the noise. Finally, the synthesized interior booming noise level is predicted by the vector synthesis diagram. It is shown that the vector synthesis method can be used to obtain the optimum design characteristic of the mounting system to control the interior booming noise of a vehicle.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.858-861
• /
• 2006

In this paper, a study on the noise reduction in a mobile fuel cell system is presented. Among various fuel cell systems around 20W capacities designed for mobile electronic devices, the active direct methanol fuel cell (DMFC) systems have been recently developed. In such systems, the primary noise source is the air pump which provides sufficient air flow ($5{\sim}6$ liter/min) for electrochemical reaction with methanol fuel while the noise contributions from other auxiliary parts are relatively small. Especially, the discrete noise tones generated by the air pump are dominant and those frequency peaks related to the rotor harmonics are needed to be suppressed by a silencer. Therefore. the Herschel/Quinke (HQ) tubes, which use the out-of-phase cancellation of acoustic waves propagating through direct and indirect pathways, are applied to the inlet of the air pump. Performance of noise reduction with HQ silencer is analytically estimated by calculating the transmission. The length and number of thin HQ tubes are optimized to decrease the radiated noise. As a result, the sound pressure level could be successfully reduced by about 10 dB after applying three serially connected HQ tubes.

• Health Policy and Management
• /
• v.10 no.1
• /
• pp.57-94
• /
• 2000

Korea's social health insurance system was introduced in 1977, which has made a universal coverage possibly by July 1989. Korean government had pursued a single objective for the last decade to put the whole population under the coverage of medical security, and the objective was achieved within 12 years. The rapid accomplishment is primarily due to such factors as limited benefits, high copayment rate, low contributions as well as rapid economic growth. There are several sources of pressure for the implementation of social health insurance such as health professional group, labor unions, politicians, international organizations etc.. However it is important to look at the feasibility of social health insurance. Among other things, it is necessary to identify the administrative infrastructure of insurance system and to assess income for source of fund. As many developed countries, Korea began to apply health insurance to the employees of the large firms, and the expansion based on employment status. Thus the several funds system was inevitable according to the gradual expansion strategy. However many persons had criticized several funds system in respect with equity and efficiency aspects. In the short history of the Korean health insurance, whether one fund or sever or funds had been the most controversial issue. In Febrary 1999, the National Assembly passed the act of one fund system. From July 2000 separate funds will be unifed under new health insurance scheme. In this study we will analyze the policy making process on implementation, expansion and integration of health insurance system of Korea. And also analyse problems related to policy making.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.1
• /
• pp.7-18
• /
• 2018

We have investigated the intensities and full width at half maximum (FWHM) of the high dispersion spectroscopic N III emission lines of AG Peg, observed with the Hamilton Echelle Spectrograph (HES) in three different epochs at Mt. Hamilton's Lick Observatory. The earlier theoretical Bowen line study assumed the continuum fluorescence effect, presenting a large discrepancy with the present data. Hence, we analyzed the observed N III lines assuming line fluorescence as the only suitable source: (1) The O III and N III resonance line profiles near ${\lambda}$ 374 were decomposed, using the Gaussian function, and the contributions from various O III line components were determined. (2) Based on the theoretical resonant N III intensities, the expected N III Bowen intensities were obtained to fit the observed values. Our study shows that the incoming line photon number ratio must be considered to balance at each N III Bowen line level in the ultraviolet radiation according to the observed lines in the optical zone. We also found that the average FWHM of the N III Bowen lines was about $5km{\cdot}s^{-1}$ greater than that of the O III Bowen lines, perhaps due to the inherently different kinematic characteristics of their emission zones.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.1
• /
• pp.54-59
• /
• 1996

In the research and development of bioactive compounds, determining whether a compound is novel is necessary at almost every stage. Fast and efficient determination can save money, time and effort, and thereby increase efficiency. Analysis and investigation of empirical results for previously determined compounds is also important in such research. The need to communicate research findings between workers is necessary. In effect, a systematic, centralized communication medium is required. Therefore, we have developed and constructed our own database and search systems. We have developed a search system on DOS and constructed a source file for our own database. To support multiple users, we have developed another specific and comprehensive search system, including powerful searching and output management features. The system has been developed to be simple and user-friendly, using the curses library of UNIX, while still allowing complicated queries to be performed easily with simple full-screen facilities. This UNIX version will be available for use by researchers on a computer network and is expected to make numerous contributions to basic research in universities. It will also have direct applications for institutes and industry.

• Journal of Environmental Science International
• /
• v.29 no.11
• /
• pp.1141-1151
• /
• 2020

The impact of sound speed variability in the sea is the very important on acoustic propagation for the underwater acoustic systems. Understanding of the temporal and spatial variability of ocean sound speed in the sea around the Ieodo were obtained using oceanographic data (temperature, salinity). from the Korea Oceanographic Data Center, collected by season for 17 years. The vertical distributions of sound speed are mainly related to seasonal variations and various current such as Chinese coastal water, Yellow Sea Cold Water (YSCW), Kuroshio source water. The standard deviations show that great variations of sound speed exist in the upper layer and observation station between 16 and 18. In order to quantitatively explain the reason for sound speed variations, Empirical Orthogonal Function (EOF) analysis was performed on sound speed data at the Line 316 covering 68 cruises between 2002 and 2018. Three main modes of EOFs respectively revealed 55, 29, and 5% the total variance of sound speed. The first mode of the EOFs was associated with influence of surface heating. The second EOFs pattern shows that contributions of YSCW and surface heating. The first and second modes had seasonal and inter-annul variations.

• Journal of Sensor Science and Technology
• /
• v.29 no.6
• /
• pp.365-368
• /
• 2020

As a green and abundant source of energy, H2 has attracted the attention of researchers for use in different applications. Nevertheless, it is highly flammable, and because of its significantly small size, extreme attention is needed to detect its leakage. In this review, we discuss different effects of noble metals on the H2 gas response and performance of metal oxide-based gas sensors. In this regard, we discuss the effects of noble metals, in combination with metal oxides, on H2 gas detection. The catalytic activity towards H2 gas and the formation of heterojunctions with metal oxides are the main contributions of noble metals to the sensing improvement of H2 gas sensors. Furthermore, in the special case of Pd and somewhat Pt, the formation of PdHx and PtHx also affects the H2 sensing performance. This review paper provides useful information for researchers working in the field of H2 gas detection.

• Journal of Plant Biotechnology
• /
• v.29 no.3
• /
• pp.199-207
• /
• 2002

The tropane alkaloids hyoscyamine (its racemic form being atropine) and scopolamine are used medicinally as anticholinergic agents that act on the parasympathetic nerve system. Because they differ in their actions on the central nervous system, currently there is a 10-fold higher commercial demand for scopolamine, in the N-butylbromide form, than there is for hyoscyamine and atropine combined. Several solanaceous species have been used as the commercial sources of these alkaloids, but the scopolamine contents in these plants often are much lower than those of hyoscyamine. For this reason there has been long-standing interest in increasing the scopolamine contents of cultivated medicinal plants. Naturally occurring and artificial interspecific hybrids of Duboisia have high scopolamine contents and are cultivated as a commercial source of scopolamine in Australia and other countries. Anther culture combined with conventional interspecific hybridization also has been used to breed high scopolamine-containing plants in the genera Datura and Hyoscyamus, but without much success. The use of recombinant DNA technology for the manipulation of metabolic processes in cells promises to provide important contributions to basic science, agriculture, and medicine. In this review, I introduce on the enzymes and genes involved in tropane alkaloid biosynthesis and current progress in metabolic engineering approaches for tropane alkaloid, especially scopolamine, production.