• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.1
• /
• pp.29-34
• /
• 2001

A sweet sorghum [Sorghum bicolor (L.) Moench] cultivar was planted on 9 and 30 June 2000 at plant densities of 4, 6, 8, 10, and 12 plants $m^{-2}$ to determine the optimum plant density in Jeju region. There were no significant planting date x plant density interactions for most traits measured. Delaying planting from 9 to 30 June delayed 21 days in heading date, and significantly decreased plant height, the number of productive stems $m^{-2}$/, and lodging. Fresh stem yield tended to be higher at the 9 June planting date than at the 30 June planting date, but total sugar and ethanol yields were not significantly affected by planting date. Percentage of soluble solid was higher at the 30 June planting date compared with the 9 June planting date. Fresh stem, total sugar, and ethanol yields quadractically increased from 22.9 to 36.7 $t^{-1}$, from 1.66 to 2.54 $t^{-1}$, and from 945 to 1440 $L^{-1}$, respectively, with increasing plant density. The optimal plant densities for the maximum fresh stem, total sugar, and ethanol were estimated to be 10.7, 9.6, and 9.9 plants $m^{-2}$ respectively.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.3
• /
• pp.656-663
• /
• 2012

Two sorghum(Sorghum bicolor L. Moench cv. Hwanggeumchal-susu and Miryang 3) samples were milled using different milling methods, and their physicochemical properties were tested. Particle size was classified into five groups such as pin mill and low temperature-microparticulation(LTM; 10,000, 20,000, 30,000, and 40,000 rpm). The water absorption index (WAI), water solubility index(WSI), and a rapid Visco analyzer(RVA) were used to examine particle size distribution and color differences. Particle size of sorghum flour prepared using LTM was lower than that prepared using a pin mill. Particle size was further reduced by successive dry milling of the LTM flour. Lightness of colored pigments increased when particle size decreased. The WAI of Miryang 3 pin milling(M1) flour was the lowest after LTM, and WSI was higher in the order of M2, M3, M4, and M5. LTM sorghum flour had significantly higher pasting viscosity, as determined using a rapid Visco analyzer. LTM Miryang 3 sorghum flour(M2~M5) flour showed lower breakdown viscosity and higher final viscosity compared to those of M1 flour, resulting in an increased setback value.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.4
• /
• pp.548-553
• /
• 2010

This study was carried out to compare the physicochemical characteristics of Korean traditional wines fermented by addition of sorghum (Sorghum bicolor) using different nuruks (SH and BS nuruk). The alcohol contents of the fermented wines ranged from 12.36 to 13.21%. The brix degrees of sorghum wines fermented using SH and BS nuruks were $8.6\sim17.9^{\circ}Bx$ and $7.6\sim20.0^{\circ}Bx$ on addition ratio, respectively. Wine no addedsorghum using SH and BS nuruks showed pH 3.74 and 3.40, total acidity of 1.40 and 1.51%, and 0.441 and 0.149 of turbidity. With increase of sorghum addition, brix degree, pH, turbidity and L-value decreased whereas total acidity and a-value increased. Total color difference (${\Delta}Eab$) parameters of wines fermented in 30, 70 and 100% sorghum addition using SH and BS nuruk were 4.33, 6.63 and 26.13, and 4.08, 5.29 and 10.59. Glucose content decreased with increasing amounts of sorghum. Organic acids such as lactic acid and acetic acid were predominantly detected in the fermented wine. Finally, based on sensory evaluations, the wine fermented by BS nuruk showed the best overall quality at 30% sorghum addition.

• Korean Journal of Food Science and Technology
• /
• v.45 no.4
• /
• pp.521-525
• /
• 2013

In this study, we investigated the physicochemical characteristics of wet noodles that had been fortified by adding non-glutinous sorghum (Sorghum bicolor L. Moench cv. Donganme) powder (SP). The wet noodles were evaluated for quality characteristics, total contents of polyphenols and flavonoids, and capacities to scavenge free radicals. The weight, volume, capacity to absorb water, and turbidity of the cooked noodles differed considerably from the unfortified control. The L- and b-values of the cooked noodles differed significantly between the treatment types, and the a-value increased significantly with increasing concentrations of SP. The tension of the cooked noodles decreased significantly with decreasing concentrations of SP. Total polyphenol and flavonoid contents, as well as free radical-scavenging activities increased significantly with increasing concentrations of SP. In conclusion, SP could be used as an ingredient to increase the sensory and antioxidant properties of wheat flour noodles without affecting their quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.1
• /
• pp.50-56
• /
• 2016

Direct seeding of sorghum (Sorghum bicolor L. Moench) has a problem of low yield including poor establishment. This poor establishment results from poor quality seed, poor seedbed preparation, seedling pests, poor sowing technique and high soil temperature. This study sought to establish the age at which sorghum seedlings can be transplanted with minimal effects on grain yield. Transplants were raised in 128 nursery tray pot. Five seedling ages were established by transplanting at 10 (T10), 15 (T15), 20 (T20), 25 (T25) and 30 (T30) days after planting (DAP). The treatment combinations were arranged in a randomized complete block design and replicated three times with an individual plot size of $6{\times}5m^2$. Each plot had five ridges with a planting space of $0.60{\times}0.20m^2$ at one plants per stand. Results showed that seedling age on transplanting significantly affected growths and yields to sorghum after transplanting. Plant heights and diameters of transplants at T15 were longer than the other transplants. Conclusively, The advantages of this practice were better control of crop density and greater yields; either to fill gaps after emerging and thinning of crops or to compensate for a growth period that was too short for a complete crop cycle.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.1
• /
• pp.41-46
• /
• 2021

Sorghum×sudangrass hybrid (Sorghum bicolor (L.) Moench, SSH) is one of the most important summer forage crop and it is widely used for silage in Korea. Agriculture is highly dependent on the climate condition and experiencing significant loss of productivity due to climate change. This study was conducted to investigate the correlation analysis between productivity of forage SSH and climatic factors in Central Northern region of South Korea for 3 years (2017 to 2019). Plant height and dry matter yield of SSH were significantly higher in Gyeonggi-do than Ganwon-do. The productivity of SSH is more closely related with temperature than other climatic factors. Maximum temperature and Growing degree days in May and June showed a positive correlation. However, correlation between production of SSH and precipitation was not clear in this study, but rainy days showed a negative correlation (0.42). In conclusion, temperature is most important climatic factor to the maintenance of plant yield.

• 한국약용작물학회:학술대회논문집
• /
• 2012.05a
• /
• pp.311-312
• /
• 2012

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.1
• /
• pp.83-90
• /
• 2010

Crop characteristics of 179 sorghum (Sorghum bicolor L. Moench) resources collected in Korea were investigated in order to establish basic data for the improvement of crop breeding. Spike types of 179 sorghum resources were classified as 5 types of open-loose type, broom-tillering type, half broom-tillering type, extreme-compact type and compact type, of which broom-tillering type was the highest ratio of 38.0% (68 plant resources) of 179 germplasm. In the existence and nonexistence of spike awn in 179 sorghum resources, 28.5% (51 plant resources) showed existence of spike awn, whereas the rest of 71.5% (128 plant resources) had no spike awn. Seed type was classified as 5 types, of which circle-shape showed the highest ratio of 43.0% (77 plant resources) and the lowest was inclined-circle shape by 7.3% (13 plant resources). Seed color was classified as 4 colors of brown, white, whitish brown, and yellowish brown, of which yellowish brown was the highest ratio of 84.4% (151 plant resources) among them. Days from seeding to heading date showed the range from 67 to 88 days with the average of 77.4 days and the highest frequency proportion of it was the group from 76 to 80 days, which occupied 37.4% (67 plant resources) of 179 germplasm. 179 sorghum resources showed high variation in the range of culm length with the average of 253.8 cm and group from 92 cm to 360 cm of culm length showed the highest frequency proportion of 20.6% (37 plant resources). Spike length showed the range from 15 to 49 cm with the average of 28.8 cm and the highest frequency distribution of it was the group from 31 to 35 cm with the proportion of 26.3% (47 plant resources), whereas the lowest was below 15 cm with the proportion of 0.6%. Days from seeding to physiological maturity showed the range from 110 to 146 days with the average of 125.5 days and the highest frequency proportion (39.7%) of it was the group from 111 to 115 days, while there were also occupied with 2 plant resources below 110 days and 23 plant resources over 141 days among 179 germplasm. Number of grains per spike showed the range from 163 to 4,532 grains with the average of 2,068.6 grains and group from 1,601 to 2,000 grains per spike was the highest frequency distribution with the proportion of 25.7% (46 plant resources). 1000 grains weight showed the range from 10.6 to 38.1g with the average of 25.6g and group from 26.0 to 30.0g was the highest frequency distribution with the proportion of 44.1% (79 plant resources).

• 한국약용작물학회:학술대회논문집
• /
• 2011.09a
• /
• pp.350-351
• /
• 2011

• Journal of Animal Science and Technology
• /
• v.64 no.1
• /
• pp.38-51
• /
• 2022

Whole-plant corn (Zea may L.) and sorghum-sudangrass hybrid [Sorghum bicolor (L.) Moench] are major summer crops that can be fed as direct-cut or silage. Proso millet is a short-season growing crop with distinct agronomic characteristics that can be productive in marginal lands. However, information is limited about the potential production, feed value, and ensilability of proso millet forage. We evaluated proso millet as a silage crop in comparison with conventional silage crops. Proso millet was sown on June 8 and harvested on September 5 at soft-dough stage. Corn and sorghum-sudangrass hybrid were planted on May 10 and harvested on September 10 at the half milk-line and soft-dough stages, respectively. The fermentation was evaluated at 1, 2, 3, 5, 10, 15, 20, 30, and 45 days after ensiling. Although forage yield of proso millet was lower than corn and sorghum-sudangrass hybrid, its relative feed value was greater than sorghum-sudangrass hybrid. Concentrations of dry matter (DM), crude protein, and water-soluble carbohydrate decreased commonly in the ensiling forage crops. The DM loss was greater in proso millet than those in corn and sorghum-sudangrass hybrid. The in vitro dry matter digestibility declined in the forage crops as fermentation progressed. In the early stages of fermentation, pH dropped rapidly, which was stabilized in the later stages. Compared to corn and sorghum-sudangrass hybrid, the concentration of ammonia-nitrogen was greater in proso millet. The count of lactic acid bacteria reached the maximum level on day 10, with the values of 6.96, 7.77, and 6.95 Log₁₀ CFU/g fresh weight for proso millet, corn, and sorghum-sudangrass hybrid, respectively. As ensiling progressed, the concentrations of lactic acid and acetic acid of the three crops increased and lactic acid proportion became higher in the order of sorghum-sudangrass hybrid, corn, and proso millet. Overall, the shorter, fast-growing proso millet comparing with corn and sorghum-sudangrass hybrid makes this forage crop an alternative option, particularly in areas where agricultural inputs are limited. However, additional research is needed to evaluate the efficacy of viable strategies such as chemical additives or microbial inoculants to minimize ammonia-nitrogen formation and DM loss during ensiling.