• Journal of Pharmaceutical Investigation
• /
• v.38 no.1
• /
• pp.63-72
• /
• 2008

Meloxicam-loaded microspheres were prepared with poly(D,L-lactic acid)(PLA) by a solvent-emulsion evaporation method. The morphology, particle size, drug loading capacity, drug entrapment efficiency (EE) and release patterns of drug were investigated in vitro. Various batches of micro spheres with different size and drug content were obtained by changing the ratio of meloxicam to $PLA^{\circ}{\AE}s$ with different molecular weight, PLA concentration in the dispersed phase and stirring rate. Meloxicam crystals on microsphere surface, which were released rapidly and could act as a loading dose, were observed with increasing drug content. The release rate was increased with increase in drug contents and decrease in the molecular weight of PLA. Microspheres prepared with smaller molecular weight produced faster drug release rate. The release rate of meloxicam for long-acting injectable delivery system in vitro, which would aid in predicting in vivo release profile, could be controlled by properly optimizing various factors affecting characteristics of microspheres. Blood concentration-time profile of meloxicam after intramuscular injection of meloxicam-loaded microspheres in rabbits showed possibility of long term application of this system in clinical settings.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.193-198
• /
• 2015

The high-pressure phase behavior of a polycaprolactone (Mw=56,145 g/mol, polydispersity 1.2), dichloromethane, and carbon dioxide ternary system was measured using a variable-volume view cell. The experimental temperatures and pressures ranged from 313.15 K to 353.15 K and up to 300 bar as functions of the $CO_2$/dichloromethane mass ratio and temperature, at poly(D-lactic acid) weight fractions of 1.0, 2.0, and 3.0%. The correlation results were obtained from the hybrid equation of state (Peng-Robinson equation of state + SAFT equation of state) for the $CO_2$-polymer system using the van der Waals one-fluid mixing rule. The three binary interaction parameters were optimized by the simplex method algorithm.

• Journal of the Korean Chemical Society
• /
• v.38 no.6
• /
• pp.449-455
• /
• 1994

In order to obtain the basic data for synthetic studies of bioactive peptide using enzyme, Kyotorphin(analgesic peptide) derivative was synthesized from Ac-Tyr-OH and $Arg-NH_2$ by $\alpha-chymotrysin$ in two phase system(organic phase and aqueous phase). In effect of organic solvent on Kyotorphin derivative synthesis from Ac-Tyr-OH(10 mM) and $Arg-NH_2$ (20 mM), the synthesis in ethyl acetate system of organic solvents was higher than those in other organic solvents (n-butanol, n-hexane, dichloromethane and chloroform). The optimal conditions for the synthesis are as follows: enzyme conc., 10 ${\mu}M;$ reaction pH, 7.0; reaction temp., $35^{\circ}C$ ; the ratio of organic phase volume/aqueous phase volume $(\alpha)$, 15. Under the optimal conditions, the yield was 70.2%, and the reaction achieved to equilibrium after 24 hrs.

• Clean Technology
• /
• v.22 no.4
• /
• pp.250-257
• /
• 2016

As an attempt to replacing petroleum-based chemicals with bio-based ones, synthesis of furfural from biomass-derived xylose attracts much attention in recent days. Conventionally, furfural from xylose has been produced via the utilization of highly corrosive, toxic, and environmentally unfriendly mineral acids such as sulfuric acid or hydrochloric acid. In this study, microwave-assisted biphasic reaction process in the presence of novel bio-based heterogeneous acid catalysts was developed for the eco-benign and effective synthesis of furfural from xylose. The microwave was irradiated for reaction acceleration and a biphasic system consisting of $H_2O$ : MIBK (1 : 2) was designed for continuous extraction of furfural into the organic phase in order to reduce the undesired side products formed by decomposition/condensation/oligomerization in the acidic aqueous phase. Moreover, sulfonated amorphous carbonaceous materials were prepared from wood powder, the most abundant lignocellulosic biomass. The prepared catalysts were characterized by FT-IR, XPS, BET, elemental analysis and they were used as bio-based heterogeneous acid catalysts for the dehydration of xylose into furfural more effectively. For further optimization, the effect of temperature, reaction time, water/organic solvent ratio, and substrate/catalyst ratio on the xylose conversion and furfural yield were investigated and 100% conversion of xylose and 74% yield of furfural was achieved within 5 h at $180^{\circ}C$. The bio-based heterogeneous acid catalysts could be used three times without any significant loss of activity. This greener protocol provides highly selective conversion of xylose to furfural as well as facile isolation of product and bio-based heterogeneous acid catalysts can alternate the environmentally-burdened mineral acids.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.387-392
• /
• 2005

Recently, dimethyl carbonate (DMC) is considered as an alternative of MTBE (methyl tert-butyl ether), additive for non-leaded gasoline with their fast biodegradation rate and low toxicity. DMC is usually synthesized so far by oxidative carbonylation of methanol, and recently developed synthetic process is also started with methanol. Since the phase equilibria of the system, consisted of DMC and methanol or other reaction products on different temperature and pressure is necessary for the optimum separation process design and operation. However the reported phase equilibria and physical properties for DMC mixtures in the Dortmund Data Bank (DDB; thermodynamic property data bank) are quite rare. Besides, infinitely dilute properties are not found. In this work, isothermal vapor-liquid equilibria at 333.15 K for methanol+DMC binary system and mixing properties, excess molar volume and viscosity deviation at 298.15 K are directly measured and correlated. Additionally, infinitely dilute activity coefficient of methanol in the DMC solvent at three different temperatures are measured and compared with predicted values using modified UNIFAC (Dortmund).

• Resources Recycling
• /
• v.7 no.4
• /
• pp.35-42
• /
• 1998

Surface mount technology is the biggest theme in the area of deιIronic component. To miniatunze an electronic component, s such as ferrite chip inductor, the cer뼈lic wet process for green-sheet lamination and/or screen printing method through a s solvent medium system is widely used. The preparation and characterization of NiCuZn Ferrite (NCZF) shurry and the green s sheet using the water mixed binder system has been studied. The 21 vol% of NCZF slurry was prepared by a ball milling. The p polyacrylic vinyl copolymer (Mw; 60,000) was used as a binder. Th$\xi$ mixture of distilled water, isopropyl alcohol (IPA) and 2l butoxy ethanol was used as a dispersion medium. The water content of medium varied from about 40% to 80%. As the results. Thc disp$\xi$rston stability of the NCZF slurry was attributed to the free polymer rather than the electrostatic force of the particle. T The viscosity of the NCZF slurry was greatly depended on the ratio of water content in the medium.

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.103-108
• /
• 2022

This research work reports the development of a Ruthenium/2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO)/nitrate catalyst system for the highly selective transformation of isosorbide (1,4:3,6-dianhydro-D-glucitol) to isosorbide-diketone (2,6-dioxabicyclo (3,3,0)octan-4,8-one). Isosorbide is a critical platform molecule for future manufacturing processes. TEMPO has been utilized to convert alcohols to carbonyl compounds for a long time. The optimal chemical reaction condition was found to be when using isosorbide (0.5 mmol) with supported Ru (10 mol%), TEMPO (5 mol%), and sodium nitrate (0.03 mmol) in the presence of acetic acid (3 ml) as a solvent at 50 ℃ and 1 atm oxygen pressure. This catalyst system demonstrated good selectivity (> 97%) and yield (87%) with respect to the desired product, in addition to a putative catalytic double oxidation mechanism.

• Microbiology and Biotechnology Letters
• /
• v.15 no.2
• /
• pp.122-128
• /
• 1987

Lipases from Candida rogosa and Rhizopus arrhizus were immobilized by entrapment with photo-crosslinkable resin prepolymer for the study of fat splitting and interesterification in isooctane-two phase system. Dioctylsulfosuccinate was selected as the most suitable surfactant during the immobilization. Lipase entrapped with hydrophobic photo-crosslinkable resin prepolymer(ENTP-3000) exhibited the highest activity, whereas lipase entrapped with hydrophilic gel(ENT-4000) was more stable in organic solvent. As the degree of hydrophobicity of the immobilization matrix was increased, Vm(app) of the lipase entrapped was increased, but Km(app) was approximately constant. While the optimum pH of the lipases entrapped on hydrophilic gel (ENT-4000) were around pH 7.0 for Candida lipase and Rhizopus lipase, the reaction rate of the lipases entrapped on hydrophobic gel were less dependent on pH variations for short reaction time. However, for longer reaction time, the lipnses from C. rugosa and R. arrhizus entrapped on hydrophobic gel yielded maximum rate at pH 6.0 and 6.5, respectively, Entrapment method endowed the lipase with thermal stability.

• Food Science and Biotechnology
• /
• v.17 no.1
• /
• pp.46-51
• /
• 2008

The objective of this study was to investigate antioxidant activities of freeze-dried, main root, and fine root of ginseng (Panax ginseng CA. Meyer), which were extracted with various solvents including ethanol, methanol, and water. Ethanol extracts in both parts showed the most powerful scavenging activities against DPPH radicals. Especially, ethanol extract of fine root had higher reducing power and antioxidant capacity than that of main root. The highest antioxidant activity in linoleic acid emulsion system was also observed in fine root extracted with ethanol, followed by methanol and water. Both ferrous ion chelating activity and ferric reducing antioxidant power (FRAP) of extracts were increased with the increase of extracts concentration. These results suggest that ethanol extract of fine root of ginseng has the most effective antioxidant capacity compared to the methanol and water extracts tested in the present study. Thus it can be applied for the effective extraction of functional material from ginseng for the usage of pharmaceutical and/or food industries.

• Toxicological Research
• /
• v.14 no.2
• /
• pp.171-176
• /
• 1998

The biological effects of the water extracts of Rhus Verniciflua Stokes (RVS) were evaluated by protection against hydroxyl radicals. Antioxidative activities were measured using both 1,1-diphenyl-2-picrylhydrazyl (DPPH) and thiocyanate method. Also we used the Glucose oxidase (GO) 20 mU/$\textrm{m}{\ell}$ hydroxyl radical generating system in mouse forebrain cell culture. Water was used for ex-traction from RVS as a solvent which has high polarity especially. In DPPH method, the antioxidative activities of the crude water extract were stronger than any other extracts of low polar-solvents. In the antioxidative effects of mouse forebrain culture using 20 mU/$\textrm{m}{\ell}$ GO, cell viabilities were evaluated 65.6%, 68.8% at 1 $\mu\textrm{g}$. 5 $\mu\textrm{g}$ addition of crude water extracts (30 mg/$\textrm{m}{\ell}$) respectively. 10 $\mu\textrm{g}$ addition of crude water extracts had more than 86.1% cell viabilities, P<0.0l significantly, compared with the group treated with GO alone. In comparison with the antioxidative activities of several commercial antioxidants (ascorbic acid, $\alpha$-tocopherol, catalase, serum), 273 $\mu\textrm{g}$/$\textrm{m}{\ell}$ addition of crude water extracts (300 $\mu\textrm{g}$/$\textrm{m}{\ell}$) showed equivalent antioxidative effect to 25 uM ascorbic acid.