• Clean Technology
• /
• v.19 no.4
• /
• pp.487-491
• /
• 2013

To efficiently desorb gold and copper-cyanide complexes adsorbed onto Dowex21K XLT resin, the mixed solvent with HCl and acetone which is a kind of dipolar aprotic solvent was used as a desorbing agent. The desorption efficiency for gold-cyanide complex was the highest as about 94% when the mixing ratio of HCl and acetone based on volume was the 7:3, however, the value decreased as the ratio of acetone increased. In the case of copper-cyanide complex, most of them was desorbed when the amount of HCl was relatively higher than that of acetone, however, desorption efficiency decreased as the ratio of acetone increased. The desorption efficiency for gold and copper-cyanide complexes was the 94 and 100%, respectively at the 0.6 M of HCl with the 7 (HCl) : 3 (Acetone) of mixing ratio and desorption efficiency for gold-cyanide complex not increased any more even though higher HCl concentration was used. And the desorption efficiency for gold and copper-cyanide complexes was about 100% at the S/L raio ${\leq_-}1.0$ whereas desorption efficiency for gold-cyanide complex was very low as about 20-29% at the S/L ratio > 1.0. Also, most of desorption process for gold and copper-cyanide complexes was completed within 120 min.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.695-699
• /
• 2012

The objective of this study was to set the optimal extraction condition of flavonoids from onion peels as a by-product generated from the onion industry without suitable processing. Four independent variables, affecting extraction conditions, which are solvent concentration ($X_1$), extraction temperature ($X_2$), pH of the solvent ($X_3$), and solvent ratio to onion peel ($X_4$) were optimized using response surface methodology (RSM). A model equation obtained from RSM is 0.772 of R-square and 0.278 of lack of fit (p>0.05) for the optimal extraction conditions. From the ridge analysis, the conditions flavoring the highest extraction were solvent concentration (v/v) of 70%, extraction temperature of $40^{\circ}C$, extraction solvent pH of 5.3, and a solvent ratio to onion peel ratio of 1:63 (w/v). The flavonoid content obtained under optimal conditions showed 302.63 mg/g, which is 1.12 times higher than the prediction value.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.119-126
• /
• 2016

In this study, we separated the lignin from the wood by using the high boiling point solvent for developing more environmental friendly pulping method. High boiling point solvents as Ethers, glycols and ketones were used to remove the lignin in the pine wood meals. The Yield and lignin content of residual wood meals was reduced according to the input of the catalyst. Me-C, E-Ca, TEG and MIBK had the best delignification rate of 9 kinds of high-boiling point solvents. At the hydrolysis ratio of the selected solvents, The TEG was highest remain ratio of carbohydrates and the E-Ca was lowest remain ratio of lignin. And the Me-C was most excellent lignin hydrolysis ratio at the low catalyst. The selectivity of delignification of Me-C, E-Ca, TEG and MIBK solvents were 49.6, 49.9, 53.8 and 53.1%, respectively, and its values were similar to those of the commercial Kraft Pulp.

• Advances in Energy Research
• /
• v.4 no.4
• /
• pp.325-337
• /
• 2016

Cerbera Odollam (sea mango) is a proven promising feedstock for the production of biodiesel due to its high oil content. Fatty acid methyl esters (FAME) were produced as the final reaction product in the transesterification reflux condensation reaction of sea mango oil and methyl acetate (MA). Potassium methoxide was used as catalyst to study its reacting potential as a homogeneous base catalyst. The initial part of this project studied the optimum conditions to extract crude sea mango oil. It was found that the content of sea mango sea mango oil was 55%. This optimum amount was obtained by using 18 g of grinded sea mango seeds in 250 ml hexane. The extraction was carried out for 24 hours using solvent extraction method. Response surface methodology (RSM) was employed to determine the optimum conditions of the reaction. The three manipulated variables in this reaction were the reaction time, oil to solvent molar ratio, and catalyst wt%. The optimum condition for this reaction determined was 5 hours reaction time, 0.28 wt% of catalyst and 1:35 mol/mol of oil: solvent molar ratio. A series of test were conducted on the final FAME product of this study, namely the FTIR test, GC-FID, calorimeter bomb and viscometer test.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.9
• /
• pp.1502-1510
• /
• 2018

Organic solvent-tolerant (OST) enzymes are widely applied in various industries for their activity and stability in organic solvents, for their higher substrate solubility, and for their greater stero-selectivity. However, the criteria for identifying OST enzymes largely remain undefined. In this study, we compared the amino acid composition of 19 OST esterases with that of 19 non OST esterases. OST esterases have increased the ratio of Ala and Arg residues and decreased the ratio of Asn, Ile, Tyr, Lys, and Phe residues. Based on our amino acid composition analysis, we cloned a carboxylesterase (EstSP2) from a psychrophilic bacterium, Sphingomonas glacialis PAMC 26605, and characterized its recombinant protein. EstSP2 is a substrate specific to p-nitrophenyl acetate and hydrolyzed aspirin, with optimal activity at $40^{\circ}C$; at $4^{\circ}C$, the activity is approximately 50% of its maximum. As expected, EstSP2 showed tolerance in up to 40% concentration of polar organic solvents, including dimethyl sulfoxide, methanol, and ethanol. The results of this study suggest that selecting OST esterases based on their amino acid composition could be a novel approach to identifying OST esterases produced from bacterial genomes.

• Korean Journal of Pharmacognosy
• /
• v.49 no.1
• /
• pp.65-69
• /
• 2018

Torilin is a major sesquiterpene of Torilis japonica (Umbelliferae) fruits and known to be a melanogenesis inhibitor. Extraction conditions are important factor for the efficient preparation to save cost and time in economic aspects. For this reason, this study was conducted to optimize the extraction condition for maximal yield of torilin. For optimization, extraction factors such as extraction solvent, extraction temperature and sample/solvent ratio were tested and optimized for maximum yield of torilin using response surface methodology with Box-Behnken design (BBD). The optimal condition was obtained as a EtOAc concentration in MeOH of 31.8%, an extraction temperature at $30.3^{\circ}C$ and a sample/solvent ratio, 1000 mg/2 ml. The torilin yield under optimal conditions was found to be 9.9 mg/g dried samples, which were well-matched with the predicted value of 10.4 mg/g dried samples. These results will provide useful information about optimized extraction conditions for the development of torilin as cosmetic therapeutics to reduce skin hyperpigmentation.

• Analytical Science and Technology
• /
• v.34 no.4
• /
• pp.153-159
• /
• 2021

In this study, we describe the development of a new high-performance liquid chromatography (HPLC) method for the simultaneous analysis of six bioactive compounds (including gallic acid, epicatechin 3-gallate, quercitrin, afzelin, quercetin, and kaempferol) from Orostachys japonicus. The extraction method was investigated and optimization of the extraction time (min), solvent composition (%), and solvent to material ratio were conducted. As a result, 30 min extraction with 50% methanol and 40:1 mL/g of solvent: material ratio achieved the highest extraction efficiency with a yield of 3.32 mg/g. Furthermore, the developed HPLC method was validated and the correlation coefficient (R) values were within the satisfactory range of 0.9995-0.9999 over the linearity range of 1.53-417 ㎍/mL. The limit of detection and limit of quantification for the six active components were between 0.03-0.08 ㎍/mL and 0.08-0.26 ㎍/mL, respectively. With these newly optimized and developed methods, four batches of O. japonicus were analyzed to confirm the high extraction efficiency of the method and the feasibility of an application.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.6
• /
• pp.426-430
• /
• 2012

The properties of green sheet were investigated in order to understanding an effects of organic solvent mixture ratio for solid oxide fuel cells fabrication. The purpose of this work is to optimize the slurry condition using the design of experiment to improve green sheet properties. The elongation increased with increasing amount of binder and solvent. With increasing amount of solvent, the air permeability increased but the tensile strength decreased. The best properties of the green sheet appeared amount of the binder 17 wt%, solvent 35 wt% and powder 48 wt%. The optimum condition of green and sintered density for solid oxide fuel cells fabrication was obtained in the sample pressured at 800 $kgf/cm^2$.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.959-964
• /
• 2010

In this work, equilibrium molecular dynamics (MD) simulations in a microcanonical ensemble are performed to evaluate the friction coefficient of a Brownian particle (BP) in a Lennard-Jones (LJ) solvent. The friction coefficients are determined from the time dependent friction coefficients and the momentum autocorrelation functions of the BP with its infinite mass at various ratios of LJ size parameters of the BP and solvent, ${\sigma}_B/{\sigma}_s$. The determination of the friction coefficients from the decay rates of the momentum autocorrelation functions and from the slopes of the time dependent friction coefficients is difficult due to the fast decay rates of the correlation functions in the momentum-conserved MD simulation and due to the scaling of the slope as 1/N (N: the number of the solvent particle), respectively. On the other hand, the friction coefficient can be determined correctly from the time dependent friction coefficient by measuring the extrapolation of its long time decay to t=0 and also from the decay rate of the momentum autocorrelation function, which is obtained by time integration of the time dependent friction coefficient. It is found that while the friction coefficient increases quadratically with the ratio of ${\sigma}_B/{\sigma}_s$ for all ${\sigma}_B$, for a given ${\sigma}_s$ the friction coefficient increases linearly with ${\sigma}_B$.

• Journal of Environmental Science International
• /
• v.28 no.11
• /
• pp.927-933
• /
• 2019

A lipid-enriched strain of Botryococcus braunii (UTEX 572) was cultivated in a semi-batch aeration tank to enhance biomass as well as to develop intracellular lipids and fatty acids. A 30 day period of incubation produced 1.39 g/L of biomass and 0.31 g/L of total lipids in the biomass. The grown biomass was pre-treated using several methods to extract the total lipid content efficiently: ultrasonication was found to yield the highest percentage of lipids-namely 19.8% per biomass. Direct heating of biomass in an autoclave also showed better performance than when using only conventional solvent extraction. To enhance the biomass harvest and lipid extraction efficiency, coagulation and flocculation steps were added to the extraction process. It is noteworthy that not only the solvent type but also the solvent/biomass ratio greatly affected efficiency. In addition, the moisture content of the harvested(wet) biomass affected the efficiency significantly. This study elucidated the need for future research on optimizing this extraction process.