• Membrane Journal
• /
• v.29 no.2
• /
• pp.105-110
• /
• 2019

Porous membranes are widely used in industry for removing particulate matter. Unlike conventional porous membrane fabrication methods, the solution spreading phase separation method can form pores very simply. The first step is to wet the mesh with the support layer, then to let the polysulfone solution flow into a solvent without water. The solvent is readily vaporized and the polysulfone is made into a thin film. When the polysulfone solution is mixed with water to form pores, the pore size can be adjusted according to the concentration ratio of the polysulfone solution. The thickness of the membrane is easily controlled by the concentration of the solution. The porous separator has the formation of meshes intact and is very useful for forming a three-dimensional structure. The solution spreading phase separation method proposed in this study is characterized by its high cost competitiveness compared with conventional membranes due to its low production cost and easy process control.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.6
• /
• pp.513-518
• /
• 2010

In the present work the second-order perturbation solutions of the simple physical model for liquid pool spreading is obtained for the case of instantaneous spill. To generalize the solution governing equations are non-dimensionalized, and two dimensionless parameters, dimensionless evaporation rate and aspect ratio of the initial pool, are identified to control the governing equations. The dimensional governing equations have three parameters. The second-order solution improves fairly the first-order solution for the pool volume.

• Membrane Journal
• /
• v.27 no.6
• /
• pp.506-510
• /
• 2017

The interfacial polymerization method has been applied to various fields as a reaction in which reactive monomers dissolved in two immiscible solutions cause polymerization at the interface. In the case of water treatment membranes, m-phenylene diamine and trimesoyl chloride are used as reactants. The performance of the membrane is affected by various polymerization factors. In this study, we investigated how the spreading rate of the organic solution influences the surface and structure of the membrane. Spreading rate of organic solutions was adjusted to 7.6 and 25 mm/sec. The solution volume of the organic phase was adjusted to 1~3 drops. The observed results showed that cracks were not found in the polyamide membrane when dropping at a drop of 7.6 mm/sec and dropping two drops at 25 mm/sec. On the other hand, cracks occurred in all cases. Therefore, the spreading rate of the initial organic solvent is expected to greatly affect the performance of the polyamide membrane.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.6
• /
• pp.477-485
• /
• 2006

A study on frost prevention of fin-tube heat exchanger is experimently performed by spreading antifreezing solution on heat exchanger surface. It is desirable that the antifreezing solution spreads completely on the surface forming thin liquid film to prevent frost nucleation and crystal growth and to reduce the thermal resistance across the liquid film. A small amount of antifreezing solution falls in drops on heat exchanger surface using two types of supplying devices, and a porous layer coating technique is adopted to enhance the wettedness of antifreezing solution on the surface. It is observed that the antifreezing solution liquid film prevents fin-tube heat exchanger from frosting, and heat transfer performance does not degrade through the frosting tests. The concentration of supplied antifreezing solution can be determined by heat transfer analysis of the first row of heat exchanger to avoid antifreezing solution freezing due to dilution by moisture absorption.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.200-206
• /
• 1998

The effect of surface tension and viscosity of polymer solution on the thickness of water casting membranes was studied. Spreading of polymer solutions on water surface was governed by the surface tension and viscosity of the polymer solution. The thickness of water casting membrane was affected by these two factors. The properties, mentioned above, were proportional to the polymer concentration. The order of magnitude in surface tension was PVC>PS>CA and that of viscosity was CA>PS>PVC. The difference of surface tension between water and polymer solution acts as driving force for spreading of polymer solution, but the viscosity as resistance. The thickness of polymeric membrane prepared by water casting was PS>CA>PVC. The order of membrane thickness was not as same as that of surface tension. This phenomena were due to the viscosity which acts as more effective spreading resistance than the surface tension.

• Membrane Journal
• /
• v.6 no.4
• /
• pp.265-272
• /
• 1996

The (polymer/carrier) composite membranes for separating the metallic ion have been prepared by the water cast-method. The morphology of these membranes was affected by the physical properties of the spreading solution. The surface tension of the (polymer/18-crown-6) composite solution was decreased with increasing the concentration of 18-crown-6 compound and the surface tension of polymer solution decreased the following order PVC>PS>CA. The viscosity of CA solution decreased with increasing the contents of the 18-crown-6 compound, but PVC and PS solutions showed no significance changes according as the concentration of 18-crown-6 compound. In the composite solutions, the spreading ability was improved by' the cyclic 18-crown-6 molecules which acted as an electric buffer and diminished the intermolecular force between the polymer chains. The (polymer/18-crown-6) composite membrane was more uniform than that of the mono polymer membrane on the coagulation state of polymer, and the top and bottom sides of membrane showed also the more smooth structure according as the concentration increment of 18-crown-6 molecule.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.128-131
• /
• 2003

This paper enhanced similar components retrieval algorithm-spreading activation method. The solution is that retrieval speed is overcome and more efficiently components are retrieved. Also we implemented interface for component information and query, and constructed component retrieval system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.6
• /
• pp.487-494
• /
• 2013

In this study, solutions for a liquid pool spreading model with continuous and instantaneous release are discussed based on the model used in the FERC's report. The effects of the release time on the liquid pool volume and radius are investigated for the continuous release. For the continuous release with the frictional resistance force in the liquid pool spreading model, the vaporization time decreases as the release time increases. On the other hand, for the continuous release without the frictional resistance force in the liquid pool spreading model, the vaporization time increases as the release time increases. These phenomena are deeply related to the pool radius. In addition, the effects of the initial pool radius for the instantaneous release in the liquid pool spreading model are discussed. For the case with the frictional resistance force in the liquid pool spreading model, as reducing release time in the model with the frictional resistance force for the continuous release, the solution for a continuous release approaches to that for an instantaneous release. On the contrary to this, the pool volume and radius for the instantaneous release without the frictional resistance force are totally different from those for the continuous release without the frictional resistance force.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.6
• /
• pp.382-390
• /
• 1997

Good appearance of insulation coating is required for non-oriented silicon steel sheets, The property is influenced by both the chemical composition of coating solution and the species of resin. The composition of inorganic-organic coating was studied to obtain good surface quality for non-oriented silicon steel. The greenish degree of coating surface depended on $Cr^{3+}$ content in the coating layer, which was satisfied when chromate content was more than 54.60 wt. %, in the coating solution. The homogeneous pattern and roughness of the coating surface depended on spreading property of the resin. Surface appearance of the coating could be improved by using resin with good spreading property at the chemical composition of chromate 59.00 wt.%.. resin 34.23wt.%, and etyhylene glycol 6.67 wt.% without colloidal sillica.

• International Journal of Computer Science & Network Security
• /
• v.23 no.7
• /
• pp.149-154
• /
• 2023

Internet of Things (IoT) is now spreading everywhere. It's the technology of every person's need so we can't step back from IoT but we can secure it as it is spreading quickly so it has greater chances of danger and being misused. There is an urgent need to make IoT devices secure from getting cracked or hacked. A lot of methods had tried and still trying to mitigate IoT security issues. In this paper Blockchain is going to be the solution of most of the IoT issues or problems. We have discussed or highlighted security issues with centralized IoT and then provided solution of such security challenges through the use of blockchain because is based on a decentralized technology that is hard to modify or update.