• Korean Journal of Environmental Agriculture
• /
• v.17 no.4
• /
• pp.306-311
• /
• 1998

Effects of soluble silicon and surfactants on the development of powdery mildew of cucumber were tested for environmentally safe powdery mildew control. Tested soluble silicon was potassium silicate$(K_2SiO_3)$ and tested commercial surfactants were Jeonchakje, Silhouette, Kaba, and Tween 20. Tested concentrations were 2, 4, 8, 16mM for the soluble silicon, 0.5 and 1.0% for Tween 20, 0.05 and 0.1% for both Jeonchakje and Kaba, and 0.03 and 0.07% for Silhouette. Water dilutions of tested materials were sprayed on cucumber (Cucumis sativus) leaves once a week for 4 weeks. From 3 days after the second spray, the diseased area and the numbers of fungal colony were measured from the treated leaves for 6 times at 3-4 days interval. Powdery mildew was less severe on treated cucumber compared to distilled water-treated cucumber (check). In all treatments, diseased area index was proportional to the number of the fungal colony. At the end of investigation, there was severe powdery mildew on check cucumbers. Average 30% of a leaf was colonized by powdery mildew fungus and the average number of the fungal colony per leaf reached to more than 70. On the other hand, none of the treated cucumber suffered severe powdery mildew. The treatments including 8 and 16mM of soluble silicon, doubled concentration of Kaba, and 0.5 and 1.0% of Tween 20 showed more than 80% of control effect compared to water-treated cucumber. In addition, no phytotoxicity was found. Potassium silicate and Tween 20 showed the possibility to replace chemical pesticides for the control of powdery mildew.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.243-245
• /
• 2009

The single phase $Ba_2SiS_4$ doped with $Eu^{2+}$ was successfully synthesized by direct sulfurization of an oxide precursor prepared by a spray drying method using a novel water soluble silicon compound, which remains soluble in a given aqueous solution. The intensity of the emission peak of thus obtained $Ba_2SiS_4:Eu^{2+}$ was 1.75 times larger than that of a sample prepared by a solid state reaction method, and it approached 106% compared to one of the best commercially available YAG:$Ce^{3+}$ phosphor.

• Journal of Integrative Natural Science
• /
• v.2 no.1
• /
• pp.28-31
• /
• 2009

We describe the synthesis and characterization of silicon nanoparticles prepared by the soluton reduction of SiCl4. These reactions produce Si nanoparticles with surfaces that are covalently terminated. The resultant organic derivatized Si nanoparticles as well as a probable distribution of Water-soluble Si nanoparticles are observed and characterized by photoluminescence(PL) spectroscopy. This work focuses originally on the organic- and water-soluble silicon nanoparticles in terms of the photoluminescence. Further this work displays probably the first layout of hydrogen terminated Si nanoparticles synthesized in solution at room temperature.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.566-567
• /
• 2009

We have examined the silicon nitride ($SiN_x$) as gate insulator with the ammonia ($NH_3$) plamsa treatment for the soluble derivatives of polythiophene as p-type channel materials of organic thin film transistors (OTFTs). Fabrications of the jetting-processed OTFTs with $SiN_x$ as gate insulator by $NH_3$ plasma treatment can be similar to performance of OTFTs with silicon dioxide ($SiO_2$) insulator.

• Analytical Science and Technology
• /
• v.24 no.2
• /
• pp.105-112
• /
• 2011

Syntheses and property analysis of hydropolysilanes were studied. Those hydropolysilanes can be utilized as precursors for amorphous silicon and polycrystallline silicon for the purpose of the solar cell and the thin film transister for the next generation's semiconductors. Most important characteristics of this study are to find optimized conditions for the synthesis and property analysis of soluble hydropolysilanes. Also the possibility of pyrolytic conversion to amorphous and polycrystalline silicon was investigated.

• Korean Journal of Materials Research
• /
• v.16 no.2
• /
• pp.80-84
• /
• 2006

The removal efficiency of Cu and Fe contaminants on the silicon wafer surface was examined to investigate the effect of cleaning solutions on the behavior of metallic impurities. Silicon wafers were intentionally contaminated with Cu and Fe solutions by spin coating and cleaned in different types of cleaning solutions based on $NH_4OH/H_2O_2/H_2O\;(SC1),\;H_2O_2/HCl/H_2O$ (SC2), and/or HCl/$H_2O$ (m-SC2) mixtures. The concentration of metallic contaminants on the silicon wafer surface before and after cleaning was analyzed by vapor phase decomposition/inductively coupled plasma-mass spectrometry (VPD/ICP-MS). Cu ions were effectively removed both in alkali (SC1) and in acid (SC2) based solutions. When $H_2O_2$ was not added to SC2 solution like m-SC2, the removal efficiency of Cu impurities was decreased drastically. The efficiency of Cu ions in SC1 was not changed by increasing cleaning temperature. Fe ions were soluble only in acid solution like SC2 or m-SC2 solution. The removal efficiencies of Fe ions in acid solutions were enhanced by increasing cleaning temperature. It is found that the behavior of metallic contaminants as Cu and Fe from silicon surfaces in cleaning solutions could be explained in terms of Pourbaix diagram.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.614-619
• /
• 2005

The water-soluble defoamers were fabricated by the mixing polyol, modified silicon resin, silicon resin and surfactant. For the defoamers, the various properties such as phase-separation time, viscosity and defoamerability were examined. The phase-saparation time of PPG mixtures was found to be PPG 400>PPG 3,000>PPG 1000. When PPG 1000 was mixed, mixtures represented the excellent defoamerability. The phase-saparation time of silicon resin mixtures was TSF-451-350>TSF-451-200>TSF-451-50. As more of high molecular silicon resin was mixed, the resulting mixtues showed reduced defoamerability. When the TSF-451-50 was mixed, the mixture's volume was increased because of the reduction of solubility. The modified silicon resin was smoothly dispersed in water, but the compatibility with PPG was not good. The defoamerability of surfactant was SPAN 20>SPAN 60>SPAN 80. SPAN 80 showed good miscibility for the silicon resin, but not good for YAS 6406 or PPG 1000.

• 한국해양학회지
• /
• v.5 no.1
• /
• pp.14-29
• /
• 1970

Tidal variations of various chemical constituents in the laver bed sea waters in Wan Do Gun were determined over one spring tidal cycle from Oct. 1968 to Feb. 1969. Total ranges and means of the contents at Pyung-il Do and Wan Do are as follows. Although the average monthly variations of each content at Pyung-il Do were similar to those at Wan Do, most of the contents at Pyung-il Do were at a slightly higher level than at Wan Do. The values of silicate-silicon, phosphate- phosphorus and soluble iron, however, showed high levels at Wan Do. Chlorinity, magnesium, calcium, dissolved oxygen, silicate-silicon and phosphate-phosphorus contents increased from Oct. 1968 to Feb. 1969, though the content of soluble iron decreased before December and slightly increased in January and February. The average monthly variations of ammonia-nitrogen and nitrate-nitrogen contents were irregular. The nitrite-nitrogen content appeared in trace amounts in the months with a comparatively high water temperature, i.e., October and November, but in midwinter it was undetected. The ranges of the tidal variations of the contents of each chemical constituent were not significantly wide, though the contents varied excessively by the hour, and this may show the irregularity of the water quality in Wan Do Gun coastal area. As a rule, no regular tidal variation of the chlorinity was observed except slightly decreased value at ebb tide at Wan Do. In general, although the pattern of the variations of calcium and magnesium contents were similar to that of the chlorinity, no definite relationships between these constituents and chlorinity were observed. Tidal variations of the dissolved oxygen content, nutrient salts and soluble iron were irregular.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1127-1127
• /
• 2001

The transfer of predictive models using various chemometric techniques has been reported for FTNIR and scanning-grating based NIR instruments with respect relatively dry samples (<10% water). Some of the currently used transfer techniques include slope and bias correction (SBC), direct standardization (DS), piecewise direct standardization (PDS), orthogonal signal correction (OSC), finite impulse transform (FIR) and wavelet transform (WT) and application of neural networks. In a previous study (Greensill et at., 2001) on calibration transfer for wet samples (intact melons) across silicon diode array instrumentation, we reported on the performance of various techniques (SBC, DS, PDS, double window PDS (DWPDS), OSC, FIR, WT, a simple photometric response correction and wavelength interpolative method and a model updating method) in terms of RMSEP and Fearns criterion for comparison of RMSEP. In the current study, we compare these melon transfer results to a similar study employing pairs of spectrometers for non-invasive prediction of soluble solid content of peaches.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.261-267
• /
• 2004

Current steel makers are trying to develop new manufacturing process to secure price competition and to improve productivity by testing a various kinds of rolling condition of several kinds of steel at TCM. Accordingly, Reverse Mill operation for Stainless steel is changing to TCM operation and furthermore, even general carbon steel and electric steel plate are requested to be worked at TCM simultaneously. By these changing of rolling condition, it become to be necessary to develop new water-soluble cold rolling oil that has a characteristics to be suitable for various working condition and in this report, we would like to mention lubrication condition to fulfill requested characteristics of each steels and development and applying result of multi-purpose water-soluble cold rolling oil which has such an lubrication property.