• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.169-172
• /
• 2002

Silver pastes for inner conductor in the Low Temperature Co-fired Ceramics (LTCC) are composed of silver powder, binder, solvent and additives. The composition of the chemicals have influence on rheology, printability, shrinkage rate, etc. In this study, commercial Ag pastes and Ag pastes made in KETI were investigated to find the relationship between characteristics of Ag paste and solid contents. Ag pastes with 68~90 wt% Solid Contents were tested. Substrate/paste matching property and conductivity of the conductor lines showed large dependence on solid contents of Ag paste.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.874-878
• /
• 2012

In the submerged fermentation of fungi, it was known pH had significant effect on the citric acid production. Various growth conditions were applied with different buffer on citric acid production by Aspergillus niger NRRL 567 grown on peat moss to find the optimum pH and most effective buffer solution. The initial pHs of different buffer solutions significantly influenced on the citric acid production and A. niger NRRL 567 produced citric acid more efficiently at high pHs. A phosphate buffer and a carbonate buffer with pH 8.6 and pH 10.0 were identified as suitable buffer solutions for citric acid production. The maximal citric acid production of 564.3 g/kg solid substrate was achieved employing carbonate buffer at pH 10.0.

• Journal of the Korean Ceramic Society
• /
• v.43 no.2 s.285
• /
• pp.85-91
• /
• 2006

Electron Beam Physical Vapor Deposition (EB-PVD) was applied to fabricate a thin film YSZ electrolyte with large area on the porous NiO-YSZ anode substrate. Microstructural and thermal stability of the as-deposited electrolyte film was investigated via SEM and XRD analysis. In order to obtain an optimized YSZ film with high stability, both temperature and surface roughness of substrate were varied. A structurally homogeneous YSZ film with large area of $12\times12\;cm^2$ and high thermal stability up to $900^{\circ}C$ was fabricated at the substrate temperature of $T_s/T_m$ higher than 0.4. The smoother surface was proved to give the better film quality. Precise control of heating and cooling rate of the anode substrate was necessary to obtain a very dense YSZ electrolyte with high thermal stability, which affords to survive after post heat treatment for fabrication a cathode layer on it as well as after long time operation of solid oxide fuel cell at high temperature.

• BMB Reports
• /
• v.38 no.5
• /
• pp.517-525
• /
• 2005

Solid phase peptide synthesis method, which was introduced by Merrifield in 1963, has spawned the concept of combinatorial chemistry. In this review, we summarize the present technologies of solid phase peptide synthesis (SPPS) that are related to combinatorial chemistry. The conventional methods of peptide library synthesis on polymer support are parallel synthesis, split and mix synthesis and reagent mixture synthesis. Combining surface chemistry with the recent technology of microelectronic semiconductor fabrication system, the peptide microarray synthesis methods on a planar solid support are developed, which leads to spatially addressable peptide library. There are two kinds of peptide microarray synthesis methodologies: pre-synthesized peptide immobilization onto a glass or membrane substrate and in situ peptide synthesis by a photolithography or the SPOT method. This review also discusses the application of peptide libraries for high-throughput bioassays, for example, peptide ligand screening for antibody or cell signaling, enzyme substrate and inhibitor screening as well as other applications.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.4 s.33
• /
• pp.1-5
• /
• 2004

A multi-layer flexible substrate is composed of copper(Cu)/polyimide that are known as good electrical conductivity, and low dielectric constant, respectively. In this study. conductor line of $5{\mu}m$-pitch was successfully fabricated without non-uniform pattern shape by electroplating copper and coating polyimide on patterned stainless steel. For multi-layer flexible substrate, via holes were drilled by UV laser and filled with electroplating copper and tin. And then, the PI layer with vias and conductor lines was stripped from stainless steel substrate. The PI layers were laminated at once with careful alignment between layers. Solid state reaction between tin and copper during lamination formed the intermetallic compounds of $Cu_6Sn_5$($\eta$-phase) and $Cu_3Sn$($\epsilon$-Phase) and achieved a complete inter-connection by vertically positioning the plugged via holes on via pad. The via formation process has several advantages; such as better electrical property and lower cost than V type via and paste via.

• Journal of the Korean Vacuum Society
• /
• v.7 no.1
• /
• pp.29-34
• /
• 1998

The solid-phase crystallization (SPC) of plasma-enhanced chemical vapor depsoited (PECVD) amorphous silicon (a-Si) films ha s been investigated by x-ray diffraction (XRD). The a-Si films were prepared on Si (100) wafers using $SiH_4$ gas and without $H_2$ dilution at the substrate temperatures between $120^{\circ}C$ and $380^{\circ}C$, and than annealed at $600^{\circ}C$ for crystallization. The annealed samples exhibited (111), (220), and (311) XRD peaks with preferential orientation of (111). The XRD peak intensities increased as the substrate temperature decreased, and the $H_2$dilution suppressed the solid-phase crystallization. The average grain size estimated by XRD analysis for the (111) texture has increased from about 10 nm to about 30 nm, as the substrate temperature decreased. The deposition rate also increased with the decreasing substrate temperature and the grain size was closely dependent on the deposition rate of the films. The grain size enhancement was attributed to an increase of the structural disorder of the Si network.

• The Journal of the Korean dental association
• /
• v.11 no.8
• /
• pp.525-530
• /
• 1973

True collagenolytic enzymes in animal tissues were first demonstrated by Gross and Lapiere (1962), who showed the ability of such an enzyme in the culture medium of living explants of tadpole tissue to degrade a specific substrate of undenatured collagen under physiological conditions. Recently, tumor-associated collagenolytic activity has been demonstrated in human neoplasm and in ascites V Carcinoma. This investigation have been peforme to determine whether or not a collagen lytic enzyme could e found in isolated solid Tawa sarcoma of Donryu female rat obtained the culture medium. The results were as follows. 1. 11.5mg% of hydroxyproline contained in Donryu rat skin collagen, which was extracted by 0.5M acetic acid. 2. Cultivation of solid Tawa sarcoma tissues on reconstituted rat skin collagen gels showed lysis of adjacent gel after 18 hours, and much more extensive lysis after 5 days. 3. Collagen substrate was not attacked by the common proteolytic enzymes, trypsin, pepsin, and pronase.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.315-316
• /
• 2001

In this study various nutritional and environmental parameters such as, initial moisture content, pH. inoculum size, air rate, sample size and nutrient supplement that influence pigment production were evaluated in solid-state cultures. optimum initial moisture content and pH were determined to be 50% and 6.0, respectively. The supplement of the substrate with different carbon, nitrogen, and mineral source reveals a more inhibitive effect as the substrate concentration increase. optimum aeration rate was determined to be 2vvm in flask culture. The maximum amount of red pigment, 3500 OD/g dried fermented rice, was obtained in optimum conditions which is obtained in solid flask culture.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.5
• /
• pp.492-497
• /
• 2006

The study on laser-ablation plasmas has been strongly interested in fundamental aspects of laser-solid interaction and consequent plasma generation. In particular, this plasma has been widely used for the deposition of thin solid films and applied to the semiconductors and insulators. In this paper, we developed and discussed the generation of carbon ablation plasmas emitted by laser radiation on a solid target, graphite. The progress of carbon plasmas by laser-ablation was simulated using Monte-Carlo particle model under the pressures of vacuum, 1 Pa, 10 Pa and 66 Pa. At the results, carbon particles with low energy were deposited on the substrate as the pressure becomes higher However, there was no difference of deposition distributions of carbon particles on the substrate regardless of the pressure.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.11
• /
• pp.1635-1641
• /
• 2008

This study investigated the effects of solid-state fermentation of a compound pig feed on its microbial and nutritional characteristics as well as on pig performance and nutrient digestibility. A mixed culture containing Lactobacillus fermentum, Saccharomyces cerevisae and Bacillus subtilis was used for solid-state fermentation and solid-state fermented feed samples were collected on days 0, 1, 2, 3, 5, 7, 10, 15, 20 and 30 for microbial counts and chemical analysis. Lactic acid bacteria increased rapidly during the first three days of fermentation and then slowly declined until day 10 and, thereafter, the counts were maintained at about 6.7 log cfu/g for the duration of the fermentation period. Enterobacteria also increased during the first two days, and then fell below the detectable level of the analysis (3.0 log cfu/g). The pH of the fermentation substrate declined from 6.1 at the start of fermentation to 5.7 by day 30. The water-soluble protein content increased from 8.2 to 9.2% while the concentration of acetic acid increased from 16.6 to 51.3 mmol/kg over the 30-day fermentation. At the end of the 30-day fermentation, the solid-state fermented feed was used in a pig feeding trial to determine its effects on performance and nutrient digestibility in growing-finishing pigs. Twenty crossbred barrows ($14.11{\pm}0.77kg\;BW$) were allotted into two dietary treatments, which comprised a regular dry diet containing antibiotics and a solid-state fermented feed based diet, free of antibiotics. There was no difference due to diet on pig performance or nutrient digestibility. In conclusion, solid-state fermentation resulted in high counts of lactic acid bacteria and low counts of enterobacteria in the substrate. Moreover, feeding a diet containing solid-state fermented feed, free of antibiotics, can result in similar performance and nutrient digestibility in growing-finishing pigs to a regular diet with antibiotics.