• Journal of Powder Materials
• /
• v.11 no.1
• /
• pp.28-33
• /
• 2004

In the present study, the focus is on the analysis of carbothermal reduction of the titanium-cobalt-oxygen based oxide powder by solid carbon for the optimizing synthesis process of ultra fined TiC/Co composite powder. The titanium-cobalt-oxygen based oxide powder was prepared by the combination of the spray drying and desalting processes using the titanium dioxide powder and cobalt nitrate as the raw materials. The titanium-cobalt-oxygen based oxide powder was mixed with carbon black, and then this mixture was carbothermally reduced under a flowing argon atmosphere. The changes in the phase structure and thermal gravity of the mixture during carbothermal reduction were analysed using XRD and TGA. The synthesized titanium-cobalt-oxygen based oxide powder has a mixture of $TiO_2$ and $CoTiO_3$. This oxide powder was transformed to a mixed state of titanium car-bide and cobalt by solid carbon through four steps of carbothermal reduction steps with increasing temperature; reduction of $CoTiO_3$ to $TiO_2$ and Co, reduction of $TiO_2$, to the magneli phase($Ti_nO_{2n-1}$, n>3), reduction of the mag-neli phase($Ti_nO_{2n-1}$, n>3) to the $Ti_nO_{2n-1}$(2$\leq$n$\leq$3) phases, and reduction and carburization of the $Ti_nO_{2n-1}$(2$\leq$n$\leq$3) phases to titanium carbide.

• 연구논문집
• /
• s.30
• /
• pp.67-77
• /
• 2000

This study was performed to investigate the characteristics and performance of model Decanter for separating swine wastewater to solid and liquid which is slurry state with 12.6% TS. Swine wastewater of the slurry tank was pumped into model Decanter which capacity was $2m^3$/hr in 10% TS Slurry inside of bowl was separated to solid-liquid by centrifugal acceleration. Sampling was done in the section of slurry feed pipe, supernatant outflow pipe, cake discharge pipe. After solid-liquid separation TS, $COD_cr$ and slurry volume reduction effect represented 38%, 40%, 19.6% respectively. Relation factor of model Decanter operation slurry concentration, optimum retention time of slurry, overflow velocity of supernatant, supernatant concentration, sludge removal rate etc. Optimal operation conditions can be set and evaluated efficiency based on the experimental results in the case of Decanter adopted for solid-liquid separation in highly concentrated swine wastewater.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.3
• /
• pp.215-222
• /
• 2006

From experiment results on pharmacetical characteristics and analysis of Glycyrrhizin extract, some conclusions are obtained as follows. From results on extract experiment of Glycyrrhizin, it appeared about 8%-extraction ratio as semi-solid state, and after dried in freezing from Glycyrrhizin extract of semi-solid state, it obtained about 70%-Glycyrrhizin extract as solid state of yellow gold color. From results on antimicrobial experiment of Glycyrrhizin extract, number of S-typhimurium and Fungus in microbe decreased more and more according to time passage. This phenomenon shows that Glycyrrhizin extract keeps antimicrobial effect. From results on antioxidation experiment of Glycyrrhizin extract, DPPH scavenging activity of free radical shows that Glycyrrhizin extract appears more remarkable reduction ability than reference samples. This phenomenon means that antioxidation of Glycyrrhizin extract appears higher than Vitamin-C and BHA. From results on instrument analysis, the fatty and aromatic components of 2-pentanone, cyclohexasiloxane, tetrasiloxane, benzoquinoline-2-carboxylic acid etcs from Glycyrrhizin extract was detected with GC/MS and inorganic components of Ca, Mg, Ti, Zn, Fe etcs from Glycyrrhizin extract was detected with ICP/OES.

• Journal of Powder Materials
• /
• v.7 no.4
• /
• pp.218-227
• /
• 2000

It is well known that the Cu-Cr alloys are very difficult to be made by conventional sintering methods. This difficulty originates both from limited solubility of Cr in the Cu matrix and from limited sintering temperature due to high vapor pressures of Cr and Cu components at the high temperature. Densification of Cu-50%Cr Powder compacts by conventional Powder metallurgy Process has been studied. Three kinds of sintering methods were tested in order to obtain high-density sintered compacts. Completely densified Cu-Cr compacts could be obtained neither by solid state sintering method nor by liquid phase sintering method. Both low degree of shrinkage and evolution of large pores in the Cu matrix during the solid state sintering are attributed to the anchoring effect of large Cr particles, which inhibits homogeneous densification of Cu matrix and induces pore generation in the Cu matrix. In addition, the effect of undiffusible gas coming from the reduction of Cu-oxide and Cr-oxide was observed during liquid phase sintering. A two-step sintering method, solid state sintering followed by liquid phase sintering, was proved to have beneficial effect on the fabrication of high-dendsity Cu-Cr sintered compacts. The sintered compacts have properties similar to those of commercial products.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.2
• /
• pp.115-124
• /
• 2006

From the result of pharmacetical characteristics and analysis of Green-tea extract, it could obtain some conclusions as follows. The extract experiment of Green-tea appeared about 10%-extraction ratio as semi-solid state, and after dried in freezing from Green-tea extract of semi-solid state, it obtained about 65% Green-tea extract as solid state. In the results on antimicrobial experiment of Green-tea extract, number of S-typhimurium and fungus in microbe decreased more and more according to the time passage. This phenomenon could show that Green-tea extract keeps antimicrobial effect. In the results on antioxidation experiment of Green-tea extract, DPPH scavenging activity of free radical showed that Green-tea extract appears more remarkable reduction ability than reference samples. This phenomenon means that antioxidation of Green-tea extract appears higher than Vitamin-C and BHA sample. In the results on intrument analysis, the fatty and aromatic components of aniline, acetaldehyde, acetic acid, trichloroethylene, caffeine etcs from Green-tea extract was detected with GC/MS analysis and inorganic components of Ca, Mg, Cu, Mo, Sb, Ti etcs from Green-tea extract was detected with ICP/OES analysis.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.41-47
• /
• 2010

This paper has proposed parallel BCH, one of error correction coding methods which has been used to NAND flash memory for SSD(solid state disk). To alter error correction capability, the proposed design improved reliability on data block has higher error rate as used frequency increasingly. Decoding parallel process bit width is as two times as encoding parallel process bit width, that could reduce decoding processing time, accordingly resulting in one half reduction over conventional ECC.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.2
• /
• pp.184-192
• /
• 2006

Six-hundred bacterial strains from human milk and milk from Sahiwal cows, Holstein Friesian cows, and buffaloes were screened for their ability to suppress phytopathogenic fungi under in vitro conditions. A consortium of 3 strains, viz., Bacillus lentimorbus B-30486 (B-30486), B. subtilis B-30487 (B-30487), and B. lentimorbus B-30488 (B-30488), isolated from Sahiwal cow milk resulted in better biological control and plant-growth promotion than single-strain treatments. For commercial-scale production of a bioinoculant, the solid-state fermentation of sugarcane agro-industrial residues, i.e., molasses, press mud, and spent wash, using the consortium of B-30486, B-30487, and B-30488, resulted in a value-added product, useful for enhancing plant growth. The application of the consortium to sugarcane fields infested with Fusarium moniliforme and Colletotrichum falcatum resulted in a reduction of mortality and significantly higher (P=0.05) plant height, number of tillers, and cane girth when compared with the control. Furthermore, under field conditions, the treatment of sugarcane with the consortium resulted in significantly (P=0.05) greater plant growth compared with nonbacterized plants. Accordingly, this is the first report on the effective use of bacteria isolated from milk for biological control and enhancing plant growth under field conditions. Furthormore, a solid-state fermentation technology was developed that facilitates the economic utilization of agro-industrial residues for environmental conservation and improving plant and soil health.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.3
• /
• pp.227-234
• /
• 2016

The influence of mixing on biogas production and organic material removal performance of solid state anaerobic digestion of dairy manure and sawdust bedding mixtures was evaluated using 22 L volume lab-scale digesters. After 45 days of anaerobic digestion at $37^{\circ}C$, cumulative methane yield of unmixed test unit ($73.1N{\cdot}mL/g-VS$) was almost 1.3 times of that of mixed one ($56.3N{\cdot}mL/g-VS$). The biodegradable volatile solids removal rate of unmixed test unit was 67%, which was almost 28% greater than mixed one. Our results reveal that unmixed condition is better than mixed one in terms of biogas production and organic material reduction.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.398-403
• /
• 2001

There is a potential usability of electric arc furnace(EAF) dust produced during the iron manufacturing process as a recycled resource, because valuable materials such as Zn, Pb and Fe are contained in it. In this study, metallic Zn was recycled from the fine electric arc furnace dust by a solid state reduction method using carbon at relatively low temperature. It was possible to recover metallic zinc by using of high vapour pressure of zinc with this reduction method. The feasibility of recycled zinc for cold bonded pellet(CBP) was investigated. The main composition of EAF dust were franklinite(ZnFe$_2$O$_4$), magnetite(Fe$_3$O$_4$) and zincite(ZnO), and Pb and Cl were completely removed by a heat treatment in oxidation environment. The reduction ratio increased as the solid carbon content increased, and it increased with decreasing of dust particle size and increasing of compaction pressure due to a increase of contact area.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.3
• /
• pp.201-204
• /
• 1986

Reduction of N-arylpyridinium compounds by $NaBH_4$ gave mixtures of the corresponding 1,2-dihydropyridine(major) and 1,4-dihydropyridine(minor), whereas similar reduction by $Na_2S_2O_4$ produced 1,4-dihydropyridines regioselectively. The proportion of 1,4-isomer in the product by $NaBH_4$ reduction appeared to increase with the electron-donating ability of N-aryl groups. When the N-aryl group is p-methylphenyl, p-ethylphenyl or p-methoxyphenyl, the 1,2-dihydropyridines in ethanol-water (4:1) solutions isomerized to the corresponding 1,4-dihydropyridines. N-(p-methylphenyl)-1,2-dihydropyridine and N-(p-ethylphenyl)-1,2-dihydropyridine in solid state also isomerized to the corresponding 1,4-dihydropyridines. The different behaviors of reduction among N-arylpyridiniums and isomerization of the reduction products depending on the substituent in N-aryl group were explained in terms of difference in the electronic effects of the substituents.