• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1102-1106
• /
• 2015

A hybrid supercapacitor (HS) is an energy storage device used to enhance the low weight energy density (Wh/kg) of a supercapacitor. On the other hand, a sudden decrease in capacity has been pointed out as a reliability problem after many charge/discharge cycles. The reliability problem of a HS affects the early aging process. In this study, the capacity performance of a HS was observed after charge/discharge. For detailed analysis of the initial charge/discharge cycles, the charge and discharge curve was measured at a low current density. In addition, a solid electrolyte interphase (SEI) layer was confirmed after the charge/discharge. A HC composed of a lithium titanate (LTO) anode and active carbon cathode was used. The charge/discharge efficiency of the first cycle was lower than the late cycles and the charge/discharge rate was also lower. This behavior was induced by SEI layer formation, which consumed Li ions in the LTO lattice. The formation of a SEI layer after the charge/discharge cycles was confirmed using a range of analysis techniques.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.652-658
• /
• 2019

본 논문은 반도체 변압기용 모듈형 멀티레벨 DC-DC 컨버터의 서브모듈 커패시터 전압 균형 제어 기법을 제안한다. 일반적으로 서브모듈 커패시터 전압은 개별적인 피드백 제어기에 의해 균등하게 제어할 수 있으나 모듈 개수에 따라 연산 시간이 증가한다. 본 논문에서 제안하는 전압 균형 제어 기법은 순시적으로 최대/최소 전압 값의 서브모듈만을 선택 및 제어하여 연산 시간을 저감할 수 있다. 시뮬레이션을 통해 제안하는 방법의 성능 및 타당성에 대한 검증을 진행한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.255-256
• /
• 2016

This paper is presents a initial starting of SST with high voltage level source. Rush current flowing as difference between capacitor level and grid level can crush the whole system. Thus, industries have used initial constituted by resistance and relay. However the initial circuit used in industries can't apply high voltage application due to isolation and economic feasible problems. Therefore many countries study method can charge capacitor with another voltage sources. Also this paper introduce method charging primary side capacitor efficiently.

• Carbon letters
• /
• 제6권2호
• /
• pp.86-88
• /
• 2005

Mesoporous activated carbon (AC) was prepared from aged petroleum coke through chemical activation. The AC has a specific surface area of 1733 $m^2/g$ and a mean pore diameter of 2.37 nm. The volume fraction of 2 to 4nm pores is 56.74%. At a current density of 10 mA/$cm^2$, a specific capacitance of 240 F/g is achieved representing the use factor of the surface area of 69.2%. And the electrical double layer capacitor (EDLC) based on the AC shows an excellent power performance. This result suggests that the presence of high fraction of mesopores can effectively increase the adsorption efficiency of the specific surface area of the AC and enhance the power performance of EDLC based on the efficient surface area of the AC.

• 대한금속재료학회지
• /
• 제47권6호
• /
• pp.338-343
• /
• 2009

The purpose of this study is to make the tantalum powder for solid electrolyte capacitor with SHS (self-propagating high-temperature synthesis) process. Raw materials for manufacturing Ta powder were used $Ta_{2}O_{5}$, Mg and NaCl. While progressing SHS process, $Ta_{2}O_{5}$ powder was reduced by Mg powder. The combustion temperature and velocity were easily controled by the varying mole ratio of NaCl, Mg and initial reaction pressure. In the case of only using NaCl as an inorganic agent, the shape is unagglomerated and has high surface area. whereas we were given the powder which has good net structure by the addition of excessive Mg as a diluent.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.358-365
• /
• 2007

This paper deals with a novel solid state controller (NSSC) for parallel operated isolated asynchronous generators (IAG) feeding 3-phase 4-wire loads in constant power applications, such as uncontrolled pico hydro turbines. AC capacitor banks are used to meet the reactive power requirement of asynchronous generators. The proposed NSSC is realized using a set of IGBTs (Insulated gate bipolar junction transistors) based current controlled 4-leg voltage source converter (CC-VSC) and a DC chopper at its DC bus, which keeps the generated voltage and frequency constant in spite of changes in consumer loads. The complete system is modeled in MATLAB along with simulink and PSB (power system block set) toolboxes. The simulated results are presented to demonstrate the capability of isolated generating system consisting of NSSC and parallel operated asynchronous generators driven by uncontrolled pico hydro turbines and feeding 3-phase 4-wire loads.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제2권1호
• /
• pp.1-14
• /
• 2002

High temperature operating test, temperature humidity test and temperature cycling were performed at various test levels for solid aluminum electrolyte capacitors made by domestic manufacturing company and foreign advanced manufacturing company. It was found that main failure mode of solid aluminum electrolyte capacitors was the decrease of their capacitances. The decrease of their capacitances has the same pattern in these tests. Test result for comparison of characteristics between domestic products and foreign advanced products shows that domestic products have the shorter lifetime and their capacitances decrease more rapidly in high temperature operating test and temperature humidity test. Also in these tests, accelerated tests for high temperature operating test and temperature humidity test were developed.

• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.73-76
• /
• 2014

$Pt/Al_2O_3/La_2Si_5O_x/SiO_2/Si$ charge trap memory capacitors were prepared, in which the $La_2Si_5O_x$ film was used as the charge trapping layer, and the effects of post annealing atmospheres ($NH_3$ and $N_2$) on their memory characteristics were investigated. $La_2O_3$ nanocrystallites, as the storage nodes, precipitated from the amorphous $La_2Si_5O_x$ film during rapid thermal annealing. The $NH_3$ annealed memory capacitor showed higher charge storage performances than either the capacitor without annealing or the capacitor annealed in $N_2$. The memory characteristics were enhanced because more nitrogen was incorporated at the $La_2Si_5O_x/SiO_2$ interface and interfacial reaction was suppressed after the $NH_3$ annealing treatment.

• Journal of Electrical Engineering and Technology
• /
• 제7권2호
• /
• pp.207-211
• /
• 2012

Spinel-$Li_4Ti_5O_{12}$ was successfully synthesized by a solid-phase method at 800, 850, and $900^{\circ}C$ according to the $Li_4Ti_5O_{12}$ cubic spinel phase structure. To achieve higher EDLC energy density with the $Li_4Ti_5O_{12}$, the negative electrode of the hybrid supercapacitor was studied in this work. The electrochemical performances of the hybrid supercapacitor and EDLC were characterized by constant current discharge curves, c-rate, and cycle performance testing. The capacitance (1st cycle) of the hybrid supercapacitor and EDLC was 209 and 109 F, respectively, which is higher than EDLC. The capacitance of the hybrid supercapacitor decreases from 209 F to 101 F after 20 cycles when discharged at several specific current densities ranging from 1 to 10 A. In contrast, capacitance of the EDLC hardly decreases after 20 cycles. Results show that hybrid supercapacitor benefits from the high rate capability of supercapacitor and high capacity of the battery. Findings also prove that the hybrid supercapacitor is an energy storage device where the supercapacitor and the Li ion secondary battery coexist in one cell system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.482-483
• /
• 2007

For measurement of dielectric constants, the commercial parallel plate electrodes system with guard-ring electrode have been widely used up to now. The capacitance derived from the parallel plate electrodes capacitor with guard-ring electrode is calculated by the equation of ($C={\epsilon}\;{\cdot}\;\frac{area\;of\;electrod}{distance\;between\;electrodes}$). Therefore, in parallel plate electrode capacitor, the diameter of the guarded electrode, the gap size between guarded electrode and guard ring, and distance between two active electrode should be measured precisely to calculate dielectric constants from the measured capacitance. Consequently their mechanical measurement uncertainties are directly contributed. Especially the air-gap between the electrodes and dielectric specimen at the system must be existed and the measurement error derived from the air-gap is impossible to evaluate as measurement uncertainties. In this study, we analyze the uncertainty of the commercial dielectric constant test cell using 3 kinds CRMs.