• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권2호
• /
• pp.116-121
• /
• 2006

This paper presents an effective modeling and simulation scheme of solar-powered hydrogen production system (PV-SPE: Photovoltaic Solid Polymer Electrolyte). Existing Hydrogen production technologies can produce vast amounts of hydrogen from hydrocarbons but emit large amounts of carbon dioxide (CO2) into the atmosphere. Advanced hydrogen production methods need development. Renewable technologies such as solar and wind need further development for hydrogen production to be more cost-competitive from other resources. In this paper, authors have focused on a renewable technology to move one step further toward commercial readiness of solar-powered hydrogen production system. Software (PSCAD/EMTDC) based model of PV-SPE system is studied for an effective simulation of hydrogen production system. Using the simulation results, an actual PV-SPE system is implemented to verify the simulation results by comparing them with actual values obtained from the data acquisition system.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제9권5호
• /
• pp.865-872
• /
• 2019

본 논문은 한국교통대학교 태양광 자작 자동차 동아리 늘해랑에서 WSC(World Solar Challenge)에 참가하기 위해 제작한 Solar Car 구동시스템에 대하여 서술한다. WSC는 세계 최대의 태양광 자동차 경주 대회로 별도의 자동차 규정을 가지고 있어 태양전지 면적이나 배터리 용량등에 제약을 두기 때문에, 제한된 규정내에서 최대 에너지 효율을 가지도록 구동시스템을 설계하는 것이 가장 중요한 기술적인 팩터이다. Solar car의 구동시스템은 태양광 에너지를 전기 에너지로 변환해주기 위한 solar array, 변환된 전기에너지를 최대 출력으로 추적하기 위한 MPPT(Maximum Power Point Tracker) controller, 생산된 전기에너지를 저장하기 위한 battery, 전기에너지를 역학에너지로 변환하여 차량 구동을 위한 BLDC(Brushless DC) motor, BLDC motor를 제어하기 위한 motor controller 등으로 구성되어 있다. 본 연구에서는 최적 구동 시스템을 위해 태양전지 에너지 변환 시스템과 배터리, 모터로 구성된 전기 구동시스템 설계에 대한 내용을 포함하고 있다.

• 한국태양에너지학회 논문집
• /
• 제27권2호
• /
• pp.19-27
• /
• 2007

The previous study was conducted to develop an air source multi heat pump system that could be operated with the solar collector and air source heat exchangers as heat source of the system. There is a winter-sowing problems in air source multi heat pump system when the outdoor temperature goes down under freezing point. The winter-sowing problem was solved by adapting R-22 refrigerant as working fluid in the previous study. However, when the system operated at high temperature, another problems are come out such as overheating of the solar collector outlet which lead to the superheat of the compressor inlet of the heat pump system. The condition could deteriorates a compressor in some case. In this study, we installed the anti-superheating devices on the previously developed system. As results of system performance test, COP of the system with anti-superheating technique is 2.4. It is a little improved COP compare to previous study's 2.23. In the results of multi heat source heating system, during operating solar collector, COP is relatively high between $200\;W/m^2$ and $400\;W/m^2$ solar intensity. It is recommended to extend the study on performance optimization with balancing the solar collect and capacity of compressor at higher solar irradiation conditions.

• 설비공학논문집
• /
• 제27권11호
• /
• pp.581-586
• /
• 2015

In this study, an analysis was performed on the performance of the solar water heating system with geo-thermal heat pump for a detached house. This system has a flat plate solar collector ($8\;m^2$) and a 3 RT heat pump. The heat pump acts as an auxiliary heater of the solar water heating system. These systems were installed at four individual houses with the same area of $100\;m^2$. The monitoring results for one year are as follows. (1) The average daily operating time of the solar system appeared to be 313 minutes in spring (intermediate season), and 135 minutes and 76 minutes in winter and summer respectively. The reason for the short operating time in summer is the high storage temperature due to low water heating load. The high storage temperature is caused by a decrease in collecting efficiency as well as by overheating. (2) The geothermal heat pump as an auxiliary heater mainly operates on days of poor insolation during the winter season. (3) Despite controlling for total house area, hot water consumption varies greatly according to the number of people in the family, hot water usage habits, etc. (4) The yearly solar fraction was 69.8 to 91.5 percent, which exceeds the maximum value of 80% as recommended by ASHRAE. So the solar collector area of $8\;m^2$ appeared to be somewhat greater for the house with an area of $100\;m^2$. (5) The observed annual efficiency of solar systems was relatively low at 13.5 to 23.6%, which was analyzed to be due to the decrease in thermal efficiency and the overheating caused by a high solar fraction.

• 전기전자학회논문지
• /
• 제21권3호
• /
• pp.211-218
• /
• 2017

본 논문에서는 CPU가 없는 자가동력 태양광 트랙커 시스템을 제안한다. 기존의 태양광 트랙커 시스템은 CPU를 사용하기 때문에 비용과 내구성의 문제가 발생한다. 또한, 기존의 태양광 트랙커 시스템은 설치 장소 및 환경의 영향을 받기 때문에 높은 발전효율을 기대하기 힘들다. 제안하는 태양광 트랙커 시스템은 광 추적센서와 모터의 연동회로를 이용하여 최대의 태양광을 추적하기 때문에 고효율 운전이 가능하고 아날로그 소자들로만 구성되어 있기 때문에 수동소자만큼의 시스템 수명이 보장된다. 또한, CPU를 사용하지 않기 때문에 프로그램 오류로 인한 오작동이 없으며, 설치 이후 유지 및 보수가 간단하다. 제안하는 태양광 트랙커 시스템의 타당성은 1년 동안의 실증 실험 결과를 통해 검증하였다.

• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3339-3344
• /
• 2012

태양 에너지 변환 효율이 높은 접시형 집광기와 스털링 엔진을 이용한 발전 방식을 조사하기 위하여 본 연구에서는 소형 스털링 엔진을 이용하여 좁은 공간에서 발전용으로 사용할 수 있는 시스템을 개발하였고, 기초 실험을 수행하였다. 본 연구에서 제작한 발전 시스템을 위하여 50만원의 제작비가 소요되었고, 제작한 시스템으로 최대 0.56 kWh의 전기를 발전하였으며, 에너지 변환 효율은 약 10%로 측정되었다. 시스템의 최적 설계를 통하여 더 높은 출력을 얻을 수 있으며, 본 연구의 기초 실험 데이터는 많은 태양열 발전 관련 분야에서 유용하게 사용될 것으로 사료된다.

• 에너지공학
• /
• 제22권2호
• /
• pp.112-119
• /
• 2013

태양열 에너지는 우리나라의 전체 에너지에서 차지하는 비율은 아직 미미하지만, 근래 이 분야에 대한 연구가 활발히 이루어지고 있다. 본 연구는 외부 날씨의 영향을 받지 않고 실내에서 안정적으로 태양열집열기에 관한 실험을 수행할 수 있는 태양열집열기 성능검사 시스템을 구축하고 새로운 형태의 태양열집열기를 연구 개발하기 위한 기초자료를 얻는데 있다. 이를 위해 태양열집열기 성능검사 시스템에 대한 CATIA 설계 및 제작을 거쳐 성능검사를 실시하였으며, 본 시스템에 장착된 이중진공관 집열기에 대한 수치해석을 수행하였다. 실험 결과 태양열집열기 성능검사 시스템의 설정온도차(${\Delta}T$)의 증가에 따라 작동회수는 감소하지만 총 작동시간은 모든 경우에 거의 동일함을 알 수 있었다. 또한 수치해석 결과 태양열흡수부의 온도가 높을수록 집열기 중심에서의 온도 감소율이 증가하는 것을 알 수 있었다.

• 한국해양공학회지
• /
• 제14권2호
• /
• pp.13-18
• /
• 2000

Recently due to the environmental pollution and the requirement for the substitute energy the interest for development of the solar energy system has been highly escalated It has been approved that the solar energy is a very useful on e because of purity and low cost. Some studies about the evaluation of solar radiation on the land has been carried out but few studies on the sea. This paper deals with a study on the evaluation of solar radiation on the sea. The experiments were carried out on the training vessel on the adjacent water of Korea Japan and China for twenty days. The distributions of solar radiation from the sea were changed into nonlinear in from according to the temperature. The solar radiation on the sea has a great influence on the velocity of wind as well as the temperature The distribuition of solar radiation has higher values on the track of the coastal sea than the open sea at same conditions.

• 한국태양에너지학회 논문집
• /
• 제30권3호
• /
• pp.98-107
• /
• 2010

This paper introduces step by step procedures for the design, fabrication and operation of a solar tracking system. The system presented in this study consists of motion controllers, motor drives, step-motors, feedback devices and other accessories to support its functional stability. CdS sensors are used to constantly generate feedback signals to the controller, which assures a high-precision solar tracking even under adverse conditions. It enables instant correction if the system goes off track by strong winds causing gear backlash. A parabolic dish concentrator is mounted on the tracking system whose diameter was 30cm. The solar position data, in terms of azimuth and elevation, sunrise and sunset times were compared with those of the Astronomical Applications Department of the U.S. Naval Observatory. The results presented here clearly demonstrate the high-accuracy of the present system in solar tracking, which are applicable to many existing solar systems.

• 한국태양에너지학회 논문집
• /
• 제36권5호
• /
• pp.73-89
• /
• 2016

To assure maximum economic benefits and the energy performance of solar water heating systems, the proper sizing of components and operating conditions need to be optimized. In recent years, a number of studies to design optimally solar water heating systems have been tried. This paper presents a design method for optimizing the various capacity-related and installation-related design variables based on life cycle cost using a genetic algorithm. The design variables considered in this study included the types and numbers of solar collector and auxiliary heaters; the types of storage tanks and heat exchangers; the solar collector slope; mass flow rates of the fluid on the hot and cold sides. The suggested method was applied for optimizing a solar water heating system for an elementary school in Seoul, South Korea. In addition, the effectiveness of the proposed optimization method was assessed by analyzing the obtained optimal solutions of six case studies, each of which was simulated with different solar fractions. It is observed that a trade-off between the equipment cost and the energy cost results in an optimal design that yields the lowest life cycle cost. Therefore, it could be helpful to apply the optimal solar water heating system by comparing the various design solutions obtained by using the optimization method instead of the engineer's experience and intuition.