• 한국지반환경공학회 논문집
• /
• 제4권3호
• /
• pp.19-26
• /
• 2003

최근 연약지반상의 말뚝기초설계에 있어서 경시효과는 말뚝의 지지력 특성을 나타내는 중요한 요소 중의 하나로 인식되고 있다. 본 논문에서는 이러한 지지력 증가효과를 연구하기 위해 두 곳의 현장에서 13개의 말뚝에 대해, 항타시 EOID(초기 동재하시험)을 실시한 후 일정한 시간이 경과한 다음 재항타시험을 수행하였다. 느슨한 실트지반에 H말뚝, 강관말뚝, PHC말뚝을 항타에 의해 설치하고 9일 후 재항타 한 결과 H말뚝, 강관말뚝의 경우 지지력이 증가된 반면, PHC말뚝은 지지력의 증가가 거의 없는 것으로 나타났다. 7일 후 재항타시험을 수행한 결과 단단한 실트지반의 경우 H말뚝과 강관말뚝은 지지력이 1.17배 증가하였다. 그러나 PHC말뚝의 경우 6일 후 수행한 제 1차 재항타시험에서는 지지력이 감소하였다가, 13일 후 수행한 3차 재항타시험에서는 지지력이 1.38배 정도 증가하는 것으로 나타났다.

• 지질공학
• /
• 제15권4호
• /
• pp.423-433
• /
• 2005

직접기초의 설계 및 안정성 평가를 위해 편마암 풍화토로 구성된 A, B 대상현장에서 평판재하시험을 실시하여 이론적, 경험적 지지력 공식 및 여러 침하량산정 공식에 대한 비교$\cdot$분석을 실시하였다. 또한, 편마암의 풍화토지 반에 실시되어진 평판재하시험의 결과를 이용한 효율적인 안정성 평가방법을 고찰하였다. 그 결과 허용 지지력은 Terzaghi의 이론공식이 평판재하시험 결과에 비교하여 과대하게 산정되어지는 것으로 나타났으며, 직접 기초 설계시 국내에서 가장 널리 이용되고 있는 Terzaghi-Peck 방법이 침하량이 크게 나타나 안정적인 설계를 하는데 효과적으로 나타났다. 또한, 편마암의 풍화토 지반에 실시된 평판재하시험결과 하중-침하 곡선에서 얻어진 지지력으로 안정성을 검토하는 경우 침하량 관점 보다 더 안전측으로 평가되어 짐을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1992년도 봄 학술발표회 논문집 깊은 기초의 연구와 실무(RESEARCH AND PRACTICE OF DEEP FOUNDATIONS)
• /
• pp.13-40
• /
• 1992

Static formulae based on limiting equilibrium theories often provide misleading predictions of pile bearing capacity in cohesionless soils due to the incorrect basic assumptions or oversimplification of actual soil conditions. Soil conditions prior to pile driving are significantly changed after pile installation and imposition of high stress levels. Therefore soi1 parameters at failure rather than those obtained at initial conditions should be used in application of static formulae. In this research. model pile test data were analyzed and compared with the predicted values obtained from the various static formulae. The results showed that the proper choice of soil parameters remarkably improve the reliability of static formulae.

• 한국지반신소재학회논문집
• /
• 제21권3호
• /
• pp.49-59
• /
• 2022

본 연구는 현장타설말뚝의 합리적인 적정설계를 알아보기 위하여 수행하였다. 즉, 현장타설말뚝의 지지층 변경에 따른 극한지지력변화를 알아보기 위하여 현장타설말뚝에 대해 실시된 양방향 말뚝재하시험을 이용하여 역해석을 수행하였다. 역해석된 자료를 바탕으로 두부재하하중에 대한 수치해석을 진행하여 대상 지반에서의 극한지지력을 Davisson 판정법으로 평가하였다. 말뚝 단부가 풍화암층 상단에 안착된 1개의 경우와 풍화토 내 서로 다른 위치에 근입된 3개의 경우에 대한 수치해석 결과, 모든 경우에서 충분한 극한지지력을 확보하는 것으로 나타났다. 즉 말뚝의 단부가 풍화암 근입이 아닌 풍화암층 상단에 안착된 경우와 풍화토 내에 근입된 현장타설말뚝도 충분한 지지력을 가지고 있어 현장타설말뚝의 지지층으로 활용할 수 있음을 알 수 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.350-357
• /
• 2002

The scale effect should be considered to determine the bearing capacity and settlement of footings from Plate-Load Test, because of the size difference between a footing and a loading plate. To analyze characteristics of bearing capacity and settlement according to the difference of loading plate sizes, model tests were peformed with four different sizes of square plate, which is B=10, 15, 20 and 25cm respectively, on five different kinds of subsoil, which is pure sand(100:0), sand-clay mixed soil(75:25, 50:50, 25:75), and pure clay(0:100). Based on the analyzed results, this paper also proposed a method of bearing capacity and settlement determination, where scale effect is considered depending on the mixing ratio of sand and clay. Applying the formular proposed in this research to field problems, it is expected that evaluation of bearing capacity and settlement of footings can be more reliable and more economic construction can be achieved.

• 산업기술연구
• /
• 제27권A호
• /
• pp.121-130
• /
• 2007

Centrifuge model tests were performed to find appropriate equations proposed previously of estimating the bearing capacity of the composite clayey soil reinforced with sand compaction pile. Model tests were carried out with changing the replacement ratio of SCP (20%, 40%, 70%), contents of fine materials (5%, 10%, 15%) and ratio of treated width to loading width (1B, 2B, 3B). Test results about bearing capacity of the composite ground were obtained by performing the surcharge load tests with measurements of applied loads and vertical displacement. Bearing capacities against bulging and shear failures were estimated by the existing equations. As results of comparing the estimated bearing capacity with experimental values the bearing capacities estimated by Greenwood's equation (1970) for bulging failure mode were similar to the test results.

• 한국해양공학회지
• /
• 제10권4호
• /
• pp.141-148
• /
• 1996

Use of stone column for deep ground treatment in soft clay soils is an effective method. The stone column significantly increases load carrying capacity of the soft clay soil. A analysis method for bearing capacity of stone column in soft clay soil is developed. The capacity made by developed method are compared wity observed values from field load test and a reasonable correlation is noted.

• Architectural research
• /
• 제20권3호
• /
• pp.65-73
• /
• 2018

The restoration of foundations supporting the immense load of the stone pagoda at Mireuksa Temple Site prioritizes securing its structural stability. But so far, rammed earth construction is still not easy to determine the structural stability. This paper aims to emphasize that a scientific experimental study was conducted on a rammed earth construction, to identify its methodology and obtain objective data about structural stability of the foundation work. An experimental study fabricated specimens from the soil that had been removed during the excavation survey, determined the allowable bearing capacity through plate load tests, and compared the results with the predicted stress after reassembly of the stone pagoda to estimate the structural stability. Then, the repair method was selected based on the experimental study result. The evaluation method of the restoration of foundations consisted of an examination of the allowable bearing capacity and settlement. The allowable bearing of the reinforced foundation was more than twice the contact pressure under the stacked stones of the pagoda. The possibility of settlement of the rammed earth foundation soil layer during the pagoda assembly is expected to be very low because the settlement amount of the reformed soil layer is less than half of the settlement of the stabilized existing soil layer.

• Geomechanics and Engineering
• /
• 제12권3호
• /
• pp.417-439
• /
• 2017

The stone columns are increasingly being used as a soil improvement method for supporting a wide variety of structures (such as road embankment, buildings, storage tanks etc.) especially built on soft soil. Soil improvement by the stone column method overcomes the settlement problem and low stability. Nevertheless, stone column in very soft soils may not be functional due to insufficient lateral confinement. The required lateral confinement can be overcome by encasing the stone column with a suitable geosynthetic. Encasement of stone columns with geogrid is one of the ideal forms of improving the performance of stone columns. This paper presents the results of a series of experimental tests and numerical analysis to investigate the behavior of stone columns with and without geogrid encasement in soft clay deposits. A total of six small scale laboratory tests were carried out using circular footing with diameters of 0.05 m and 0.1 m. In addition, a well-known available software program called PLAXIS was used to numerical analysis, which was validated by the experimental tests. After good validation, detailed of parametric studies were performed. Different parameters such as bearing capacity of stone columns with and without geogrid encasement, stiffness of geogrid encasement, depth of encasement from ground level, diameter of stone columns, internal friction angle of crushed stone and lateral bulging of stone columns were analyzed. As a result of this study, stone column method can be used in the improvement of soft ground and clear development in the bearing capacity of the stone column occurs due to geogrid encasement. Moreover, the bearing capacity is effected from the diameter of the stone column, the angle of internal friction, rigidity of the encasement, and depth of encasement. Lateral bulging is minimized by geogrid encasement and effected from geogrid rigidity, depth of encasement and diameter of the stone column.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.558-561
• /
• 2001

SIP(Soil cement Injected Precast pile) that inserts a precast pile after injecting a cement paste into a boring has been applied rapidly through the change of construction circumstances. But there isnt any logical equation of a bearing capacity fitted to SIP yet. So Meyerhof equation has mainly been used to predict a bearing capacity in a design stage instead. But it has shortcomings such as lack of confidence because it has derived not from a theory but from an experience obtained from the result of SPT (Standard Penetration Test) and because a penetration depth tends to be deeper by an excessive design that depends on an end bearing capacity of a pile more than a skin frictional resistance. In this study, thereupon, a direct shear test in the laboratory was performed to both SM and SC soils in variable conditions to verify skin friction properties for the purpose of presenting some reasons capable of reducing penetration depths. Through the tests, soil to soil of SM in cohesion, rough panel to soil of SM in friction angle and soil to soil of SM in shear strength tended to be high. And a shear strength increased as its total unit weight increased in all cases.