• 제목/요약/키워드: soil and water pressure

검색결과 649건 처리시간 0.024초

지하 LPG저장공동 주변의 지하수위 강하 원인규명을 위한 파라미터추정 (Parameter estimation for identification on cause of drawdown around underground LPG storage cavern)

  • Han, Il-Yeong;Lee, Dae-Hyuck;Lee, Jung-Eun;Jung, Kwang-Pil
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 1998년도 공동 심포지엄 및 추계학술발표회
    • /
    • pp.76-80
    • /
    • 1998
  • In order to identify the cause of ground water drawdown of a piezometer installed around the LPG storage cavern, parameter estimations were conducted by inverse and forward numerical models. An inverse model, SK-EST developed by SK Engineering & Construction Co., Ltd.(SKEC,1997) was performed to estimate the change of the hydraulic conductivity. It was verified by the commercial forward model, AQUA3D (VATNASKIL,1995). The simulation results showed that the hydraulic diffusivity of the rock mass between the piezometer and the cavern had been increased and the change rate of the hydraulic head had been abruptly increased in response to the change of the operation pressure. Finally the statistical analysis for observed data showed the increase of the change rate of the hydraulic head and thus proved the applicability of SK-EST.

  • PDF

광릉 수문연구부지 내 원두부 소유역에서 지하수면의 주기적 변동 특성 (Periodic Variation of Water Table at a Headwater Catchment in the Gwangneung Ecohydrological Research Site)

  • 김유리;우남칠;이상덕;홍태경;김준
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제13권1호
    • /
    • pp.43-51
    • /
    • 2008
  • 광릉 수문연구부지 내 원두부 소유역에서 천부 관측정 G1, G4를 대상으로 2006년 2월부터 10월까지 5분 간격으로 관측한 지하수위 변동자료에 대한 주기적 변동원인과 그 영향을 분석하였다. 지하수위는 일주기의 반복성을 보이며, 겨울에서 여름으로 갈수록 변동폭이 증가하였다. 지하수위 관측 자료의 파워스펙트럼 분석 결과, 24.38시간의 일주기 성분과 12.19시간의 반일주기 성분이 나타나며, 이는 각각 지구 조석 성분 중 $P_1$ 분조와 $L_2$ 분조에 근접하다. 일주기 성분은 겨울에 비해 여름에 더 큰 power를 나타내어 지하수위가 조석 뿐 아니라 증발산에 의한 영향까지 함께 받고 있음을 보여준다. 또한 강우 직후의 지하수위 자료에서는 일주기 성분이 감소하는 현상 역시 일주기 성분에 증발산이 큰 영향을 미치고 있음을 지시한다. 조석과 증발산에 의한 지하수위 변동은 일주기 성분이 $0.4{\sim}4.2$ cm, 반일주기 성분은 $0.2{\sim}0.7$ cm 정도의 영향을 미친다.

시공여건을 반영한 TBM선정 방법에 대한 연구 (Study on the selection of TBM in consideration of field conditions)

  • 오준근;사공명
    • 한국터널지하공간학회 논문집
    • /
    • 제16권2호
    • /
    • pp.125-133
    • /
    • 2014
  • 본 연구에서는 지반 및 현장조건을 고려한 TBM 선정방법을 제시하였다. 지반, 환경, 가격조건별로 TBM 선정에 영향을 미치는 인자와 굴착장비를 선정 분류 하였다. 선정된 영향인자와 장비 간 가중치를 AHP기법을 적용하여 산정하였다. 선정된 영향인자의 분석결과 기본요소에서는 지반조건이 가장 중요한 영향요소로 확인되었으며, 세부요소로서 암반조건에서는 강도, 토사지반조건에서는 수압이 가장 중요한 인자로 확인되었다. 주변 환경조건에서는 시공성에 영향을 줄 수 있는 주변구조물 인접여부가 중요한 인자로 확인되었다. 마지막으로 도출된 각 영향인자별 가중치를 토대로 굴착현장에 적용 가능한 TBM을 선정하고 도출결과와 실제 현장에 적용된 장비의 비교를 통하여 본 연구에서 제안하는 방법에 대한 검증이 이루어 졌다.

다단 혼 형태의 초음파 장비를 이용한 초음파 화학적 효과 연구 (Sonochemical Effects using Multi-stepped Ultrasonic Horn)

  • 최종복;이성은;손영규
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제25권4호
    • /
    • pp.58-66
    • /
    • 2020
  • Since the typical horn-type ultrasonic equipment induces a reaction at the probe tip, the sonochemical reaction has a limitation that it occurs only in a specific area. As one of the ways to overcome this limitation, an ultrasonic device with multi-stepped horn equipped with several oscillators has been developed. The objective of this study was to investigate the sonochemical effects induced by acoustic cavitation system in 20 kHz multi-stepped ultrasonic horn using calorimetry, KI dosimetry and the luminol test. The sonochemical effects of multi-stepped ultrasonic horn were compared with that of the typical horn-type 20 kHz ultrasonic device. The effect of immersion depth and power on the sonochemical reaction was investigated in the ultrasonic system with multi-stepped ultrasonic horn. Higher calorimetric energy was obtained at higher immersion depth and power conditions. Sonochemical effects increased significantly when using the high immersion depth and input power. However, as the input power increased, the cavitation reaction zone concentrated around the ultrasonic horn. Additionally, the experiments to examine the effect of liquid temperature was conducted. The smaller sonochemical reaction was obtained for the higher liquid temperature. The effect on temperature seems to be closely related to liquid conditions such as viscosity and vapor pressure of water.

SCP 개량지만의 압밀거동에 대한 스미어 효과 (Smear Effect on Consolidation Behaviors of SCP-improved Ground)

  • Kim, Yun-Tae
    • 한국지반공학회논문집
    • /
    • 제20권2호
    • /
    • pp.59-66
    • /
    • 2004
  • SCP 개량지반은 연약지반에 타설된 모래말뚝과 주변 연약지반으로 구성된 복합지반을 형성한다. 복합지반에 상재하중이 작용할 경우, SCP쪽으로 반경방향의 흐름에 의하여 시간의존적인 압밀거동이 유발될 뿐만 아니라, SCP와 주변 연약지반 사이에서 강성도 차이로 인하여 응력전이가 유발된다. 본 논문은 SCP 개량지반의 압밀거동에 대한 교란효과의 영향을 고려하기 위하여 원통형 실린더 지반에 대한 수치해석을 수행하였다. 수치해석결과 연약지반의 교란영역은 유효응력-간극수압의 거동, 응력전이기구, 응력분담비에 영향을 줌을 알 수 있었다. 또한 SCP와 점토 사이의 응력전이량은 상부 z/H=0.25에서 가장 크며, 깊이가 증가함에 따라 감소한다. 응력분담비는 상수값이 아니라 압밀과정에 의존하며, 교란영역을 가진 연약지반의 응력분담비는 교란영역이 없는 연약지반의 응력분담비보다 큼을 알 수 있다.

자동화 그라우팅 기법의 현장적용성에 관한 연구 (A Study on the Field Application of Automatic Grouting System)

  • 도종남;박정환;최동찬;천병식
    • 한국지반환경공학회 논문집
    • /
    • 제13권1호
    • /
    • pp.63-74
    • /
    • 2012
  • 국내에서 그라우팅은 대부분 전문성 있는 지식이나 이론적인 연구에 의한 방법이 아닌 경험적인 방법에 의해 설계되고 있다. 따라서, 본 연구에서는 그라우팅이 적용되는 건설현장에서 자동화 그라우팅 기법의 품질관리기술과 방법에 대한 것을 논의하고자 한다. 연구결과, 제한적인 물주입시험에 의한 최적주입압 결정과 관련된 방법은 그라우팅 전.후에 대한 평가만이 가능한 것으로 나타났으며, 그라우팅재료가 지반내에서 확산하는 동안 주입압력(p)~주입속도(q)~침투시간(t) 차트 분석을 통해 주입압, 주입속도, 침투시간의 특성을 평가할 경우 그라우트 압력에 의한 지반의 파쇄를 방지할 수 있을 것으로 나타났다. 주입압력(p), 주입속도(q)와 침투시간(t) 곡선을 분석하여 적합한 값을 도출하면 효과적인 설계를 수행할 수 있다. 본 차트분석기법은 기존의 종이롤에 기록되어 지는 주입압력(p)과 주입속도(q)를 정리하여 관리할 수 있으며, 통합유량계는 정확한 수량을 기록할 수 있으나 기록된 주입압력은 초기, 중급 및 최종 지점에 따라 다르게 나타나므로, 통합유량계 및 그라우팅 대상 지반의 특성의 상관관계가 규명되는 것이 바람직한 것으로 사료된다, 본 연구에서 제안된 자동화 그라우팅 기법은 주입압력과 그라우팅 대상 지반의 특성간의 신뢰성 있는 상관관계를 설명할 수 있으며, 이를 활용한 그라우팅 품질관리 기술을 발전시킬 것으로 기대된다.

다양한 실내시험을 이용한 지반의 탄성계수 평가 (Evaluation of Modulus of Soils Using Various Laboratory Tests)

  • 권기철;김동수
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 가을 학술발표회 논문집
    • /
    • pp.345-352
    • /
    • 2000
  • It is very important to evaluate the reliable nonlinear modulus characteristics of soils not only in the analysis of geotechnical structures under working stress conditions but also for the soil dynamic problems. For the evaluation of modulus characteristics of soils, various tests have been mostly employed in laboratory. However, different testing techniques are likely to have different ranges of reliable strain measurements, different applied stress level, and different loading frequencies, and the modulus of soils can be affected by these variables. For reliable evaluation, therefore, those effects on the modulus need to be considered, and measured values should be effectively adjusted to actual conditions where the soil is working. In this paper, to evaluate the modulus characteristics of soils, laboratory testing such as free-free resonant column (FF-RC), resonant column (RC), torsional shear (TS), static TX, and cyclic M/sub R/ tests were performed. The effects of strain amplitude, loading frequency, loading cycles, confining pressure, density, and water content on modulus were investigated. It is shown that the FF-RC test, which is simple and inexpensive testing technique, can provide a reliable estimation of small strain Young's modulus (E/sub max/), and the modulus evaluated by various laboratory tests are comparable to each other fairly well when the effects of these factors are properly taken into account.

  • PDF

강제치환 거동특성에 관한 원심모형실험 (Centrifuge Model Experiments on Behaviour Characterisitc in Forced Replacement Method)

  • 이종호;박병수;정길수;유남재
    • 산업기술연구
    • /
    • 제23권A호
    • /
    • pp.131-137
    • /
    • 2003
  • This thesis is results of centrifuge model experiments to investigate the behavior of replacement method in dredged and reclaimed ground. For experimental works, centrifuge model tests were carried out to investigate the behavior of replacement method in soft clay ground. Basic soil property tests were performed to find mechanical properties of clay soil sampled from the southern coast of Korea which was used for ground material in the centrifuge model tests. Reconstituted clay ground of model was prepared by applying preconsolidation pressure in 1g condition with specially built model container. Centrifuge model tests were carried out under the artificially accelerated gravitational level of 50g. Replacing material of leads having a certain degree of angularity was used and placed until the settlement of embankment of replacing material was reached to the equilibrium state. Vertical displacement of replacing material was monitored during tests. Depth and shape of replacement, especially the slope of penetrated replacing material and water contents of clay ground were measured after finishing tests. Model tests of investigating the stability of embankment after backfilling were also performed to simulate the behavior of the dike treated with replacement and backfilled with sandy material. As a result of centrifuge model test, the behavior of replacement, the mechanism of the replacing material being penetrated into clay ground and depth of replacement were evaluated.

  • PDF

등방제하과정과 반복전단과정에서의 멤브레인 관입량 및 보정식에 대한 실험적 고찰 (Correction for Membrane Penetration Effect during Isotropic Unloading and Undrained Cyclic Shear Process)

  • 권영철;배우석;오세욱
    • 대한토목학회논문집
    • /
    • 제26권3C호
    • /
    • pp.201-207
    • /
    • 2006
  • 유효응력의 산정을 위해 간극수압의 측정이 필수인 지반공학 분야의 실험에서는 멤브레인을 사용하여 구속압과 간극수압의 계측을 실시하지만 구속압의 변화 등에 의해 멤브레인이 공시체 쪽으로 관입하는 현상이 발생하여 체적변형률과 유효응력의 계측치에는 오차가 포함되게 된다. 본 연구에서는 중공비틀림 전단시험장치를 사용하여 등방제하과정과 반복전단과정 및 액상화 후의 재압밀 과정에 있어서의 멤브레인 관입량 및 관입 보정식에 대한 고찰을 실시하였다. 실험 결과, 반복전단에 의해 모래의 유효응력이 20kPa 이하의 낮은 유효응력 조건에서는 보정식에 의한 멤브레인 보정량이 과대평가 되고 있음을 알 수 있으며, 이러한 보정식의 한계는 유효응력이 0에 가까워질 수록 보정량이 급격히 증가하는 것이 원인이다. 본 연구에서는 이러한 점을 감안하여 보정량의 급증을 방지하기 위한 상수의 도입에 대해서도 검토하였다. 이와 더불어 초기 상대밀도가 높거나 액상화 후의 입자 재배열 등의 밀도 변화가 일어나는 경우에도 보정식의 적용에 대한 신중한 검토가 필요하다는 점도 확인하였다.

농지보존에 대한 수도권 주민 의식 조사 연구 (A Study on Preservation and Development of Agricultural Land)

  • 박영춘;민성희;이성우
    • 농촌계획
    • /
    • 제8권1호
    • /
    • pp.41-59
    • /
    • 2002
  • The condition and management of land resources has become an increasing matter of concern in recent years, because of the pressure placed upon land for agricultural use by expanding populations and economic development. Pressures upon land quality can lead to various forms of land degradation, such as in soil erosion, soil fertility decline, adverse changes in water resources, salinization of irrigated areas, or decline in the biological condition of forests or rangelands. In 1992, World Bank estimates that the cost of degraded areas has been estimated as 10-50 times higher than that of measures to prevent degradation. Based upon a survey interviewed with people living in rural areas, the present study argue that it is important to establish policies for preventing changes in agricultural land use, to provide early warning of adverse trends and identification of problem areas. The present study also stresses that stewardship of agricultural land resources plays a leading role in achieving sustainable rural development not to mention agricultural and forestry production.