• Structural Engineering and Mechanics
• /
• 제83권4호
• /
• pp.435-449
• /
• 2022

Constitutive modeling that could reasonably predict and effectively evaluate the post-peak structural behavior while eliminating the mesh-dependency in numerical simulation remains to be developed for general engineering applications. Based on the previous work, a simple one-dimensional modeling procedure is proposed to predict and evaluate the post-peak response, as characterized by the evolution of localized strain field, of a steel member to monotonically uniaxial tension. The proposed model extends the classic one-dimensional softening with localization model as introduced by (Schreyer and Chen 1986) to account for the localization length, and bifurcation and rupture points. The new findings of this research are as follows. Two types of strain-softening functions (bilinear and nonlinear) are proposed for comparison. The new failure criterion corresponding to the constitutive modeling is formulated based on the engineering strain inside the localization zone at rupture. Furthermore, a new mathematical expression is developed, based on the strain rate inside and outside the localization zone, to describe the displacement field at which bifurcation occurs. The model solutions are compared with the experimental data on four low-carbon cylindrical steel bars of different lengths. For engineering applications, the model solutions are also compared to the experimental data of a cylindrical steel bar system (three steel bars arranged in series). It is shown that the bilinear and nonlinear softening models can predict the energy dissipation in the post-peak regime with an average difference of only 4%.

• 한국압력기기공학회 논문집
• /
• 제16권2호
• /
• pp.58-67
• /
• 2020

This study presents cyclic stress-strain and tensile test results at room temperature (RT) and 316℃ using cold-worked TP304 stainless steel base and weld metals. By comparing the cyclic hardening/softening behavior and failure cycle of cold-worked materials with those of irradiated austenitic stainless steels, the feasibility of simulating the irradiation effect on cyclic deformation and failure behaviors of TP304 stainless steel base and weld metals was investigated. It was found that, in the absence of strain-induced martensite trasformation, cold-working could properly simulate the change in cyclic hardening/softening behavior of TP304 stainless steel base and weld metals due to neutron irradiation. It was also recognized that cold-working could adequately simulate the reduction in failure cycles of TP304 stainless steel base and weld metals due to neutron irradition in the low-cycle fatigue region.

• Advances in nano research
• /
• 제12권1호
• /
• pp.101-115
• /
• 2022

Some researchers pointed out that the nonlocal cantilever models do not predict the dynamic softening behavior for nanostructures (including nanobeams) with clamped-free (CF) ends. In contrast, some indicate that the nonlocal cantilever models can capture the stiffness softening characteristics. There are substantial differences on this issue between them. The vibration analysis of porosity-dependent functionally graded nanoscale tubes with variable boundary conditions is investigated in this study. Using a modified power-law model, the tube's porosity-dependent material coefficients are graded in the radial direction. The theory of nonlocal strain gradients is used. Hamilton's principle is used to derive the size-dependent governing equations for simply-supported (S), clamped (C) and clamped-simply supported (CS). Following the solution of these equations by the extended differential quadrature technique, the effect of various factors on vibration issues was investigated further. It can be shown that these factors have a considerable effect on the vibration characteristics. It also can be found that our numerical results can capture the unexpected softening phenomena for cantilever tubes.

• 대한한의학회지
• /
• 제16권1호통권29호
• /
• pp.71-95
• /
• 1995

To be helpful to the treatment of pulmonary cancer with oriental medicine, we got clinical reports together and analyzed the data. The results were obtained as follows: 1. The treating methods could be summarized as three methods that were reinforcing vital energy, eliminating harmful Qi, and reinforcing vital energy with eliminating harmful Qi. The methods of reinforcing vital energy were supplementing Qi & Yin, increasing pahological heat & reinforcing kidney, augmenting Qi & blood, supplementing vital energy and strengthening fundermental energy, reinforcing spleen and increasing Qi, lubricate Yin and lung, and the other methods of eliminating harmful Qi were transforming pathological fluid and softening, clarifying heat and eliminating poison, dipersing lung and softening, toxicding and softening, guiding Qi and activating blood, clarifying heat and dispersing lung, guiding Qi and counteracting stress etc., and the methods of supplementing vital energy with eliminating poison were reinforcing spleen and transforming pathological fluid, increasing Qi and activating blood, supplementing Yin and clarifying heat, reinforcing spleen and dry the dampness, lubricating lung and transforming patholigical fluid and supplementing Qi and activating blood. 2. The oriental prescriptions used for pulmonary cancer were Chunkeum-Weekyungtang & Sohamhwingtang, Jinhayookgunjatang, Hyulboochukeotang, Bokbangkyogonamtang was reported to be effective in the treatment of metastasis. 3. Bokbangshinjingtang and haewool were applied for the complications of pulmonary cancer, Soshihotang for fever, hangamryung for tumor pain. Prunus ansu Komarov, Eriobotrya japonica Lirdley, Pyrrosiae lingua Farwel, Steomon japonica Miguel, Maximowiczia chinensis Ruprecht var, Morus bombycis Koidzumi for cough, Panax Pseudo-ginseng Wall. var, Bletilla striata Reichenbach f., Acacia catechu(兒茶) for hemoptysis, Lonicerae flos, Aspongopus chinensis(九香蟲) for chest pain, Cypsum Fibrosum, Gazella gutturosa, Scutellaria baicalensis Georgi, Gypsophila oldhamiana Miquel for fever, Lepidii semen descurainiae semen, Belamcanda chinensis D.C, Gnaphalium affine(佛耳草) for asthma. 4. For the reduction of side effect by chemotherapy and radiotherapy it was known that supplementing Qi was used chiefly for side effect of chemotherapy and augmenting Yin applied to side effect of radiotherapy. 5. The oriental presciptions were suggested for the side effect by chemotherapy and radiotherapy ; Sammaekaek(參麥液), Whaebokwontang(化瘀復元湯), Hwangjungomitang(黃精五味湯), Yukmijihwangtang(六味地黃湯), Hyangsayukgunjatang(香砂六君子湯), Samlyeekulsan for side effect by chemotherapy while Geumgweisingiwhan, Hwanglyentang(黃連湯), Hwanglyenhaedoktang(黃連解毒湯), Yangyeunchungpeitang(養陰淸肺湯), Idongtang(二冬湯), Jayeunkanghwatang(滋陰降火湯) for side effect by radiotherapy.

• 한국식품영양학회지
• /
• 제17권2호
• /
• pp.193-198
• /
• 2004

본 연구는 저장 중 연화 다시마의 연화 안정성을 검토하여 다시마 다시마 가공품의 중간소재를 개발하기 위하여 수행하였다. 본 연구에서는 초산과 가열하여 연화시킨 다시마의 유연조직을 유지하기 위하여 친수성이 강한 연화제를 사용하여 경시적인 연화 안정성을Avrami equation 색깔 및 관능성 등의 변화를 검토하였다. 그 결과 4일간 저장할 경우 ln( $E_{L}$- Et) vs t와의 관계에서 isomalto oligosaccharide의 기울기가 가장 낮은 값을 나타내었으며 log(- ln( $E_{L}$- Et)/( $E_{L}$- $E_{O}$) vs log t의 관계에서도 Avrami equation의 exponent n는 1.00-1.67 범위에 있고 isomalto oligosaccharide의 exponent n는 1.00으로 가장 연화 안정 효과가 큰 것으로 나타났다. Rate constant는 isomalto oligosaccharide가 가장 낮은 값을 나타내어 경시적으로 연화가 천천히 진행됨을 알 수 있었다. 연화제를 사용한 경우 연화 다시마의 명도(L), 적색도(a), 황색도(b)는 대부분 감소하는 경향을 나타내었다. 관능성의 경우 색깔 선호도, 냄새, 가공적합성, 점조성, 연화 정도 및 전체 기호도 등은 isomalto oligosaccharide를 사용한 경우가 가장 좋은 것으로 나타났다. 결론적으로 연화 다시마를 연화제로 처리하면 중간소재로서의 가치와 저장성, 관능적 가치가 좋은 것으로 나타났으며 특히 isomalto oligosaccharide를 사용하는 것이 좋은 것으로 나타났다. 나타났다.다.

• Journal of Welding and Joining
• /
• 제33권6호
• /
• pp.27-35
• /
• 2015

Laser welding sector in the automotive industry has been widely recognized as one of the most important bonding processes, such as parts welding. Efforts to improve productivity and weld quality have been progressing steadily. In addition, laser welding is suitable for welding process that can produce high-quality welds suitable for flexible production and small quantity batch productions. In order to ensure the rigidity of the material, high strength material are applied to more than 1 GPa class body parts and automotive bumper beams. However, not only the situation is that the trend of domestic research, but also development is based on product molding considering freedom of shape where reinforcement is applied to meet the safety regulations and high-speed crash performance, despite the use of high strength materials. The tendency for heat-affected zone (HAZ) softening phenomenon common in areas of laser welded high tensile steel welding confirmed the occurrence of weld softening effect according to the process parameters. Based on this, range of process parameters could be selected for ensuring weld quality.

• 콘크리트학회지
• /
• 제8권2호
• /
• pp.129-138
• /
• 1996

콘크리트의 국소화현상은 콘크리트의 연화거동에 수반되어 변형이 국부적으로 집중되는 현상으로 콘크리트 구조물의 극한하중을 지배한다. 본 연구에서는 연화거동에 따른 변형률국소화현상을 일으키는 콘크리트를 국소영역과 비국소영역으로 나누어 모형화하였으며 불균질재료의 평균화개념을 이용하여 콘크리트의 국소화거동을 정식화하였다. 본 연구에서는 정식화된 모형을 사용하여 일축압축 및 일축인장하중을 받는 콘크리트의변형의 국소화 현상을 재현하였으며, 제안된 모형이 일축하중하의 콘크리트의 국소화거동을 잘 재현할 수 있음을 실제 실험결과와의 비교를 통하여 검증하였다. 해석결과로부터 일축압축하중하의 콘크리트의 국소영역의 크기는 콘크리트의 최대골재치수의 3배가 적당하고, 시편의 길이에 따른 콘크리트의 크기효과도 재현할 수 있음을 보였다. 또한 제안된 모형식에 직접인장시험에서 구해진 인장연화곡선의 사용이 일축인장하의 콘크리트의 국소화현상을 잘 표현하는데 적합함을 알 수 있었다.

• 열처리공학회지
• /
• 제18권1호
• /
• pp.18-23
• /
• 2005

Effect of cold rolling on microstructural changes has been investigated for a Zn-15%Al alloy to elucidate the reason for its work softening behavior. Fully annealed microstructure of the Zn-15%Al alloy is characterized by ${\eta}$ grains and (${\eta}+{\alpha}$) lamellar colonies, where ${\eta}$ and ${\alpha}$ are Zn-rich HCP and Al-rich FCC phases, respectively. The hardness decreases continuously with increasing cold rolling degree, exhibiting work softening behavior. It is revealed that during the cold rolling, (${\eta}+{\alpha}$) lamellar colonies gradually change into equiaxed ${\eta}$ and ${\alpha}$ grains due to dynamic recrystallization at room temperature, while pre-existing ${\eta}$ grains are only deformed without recrystallization. Furthermore, cold rolling causes the precipitation of dissolved Al solutes in ${\eta}$ grains. In view of these results, change of (${\eta}+{\alpha}$) phases from lamellar to equiaxed morphology, which results in structural softness and increase in equiaxed ${\eta}/{\alpha}$ grain boundaries with higher mobility, and deterioration of solution hardening by precipitation of Al solutes from ${\eta}$ grains, are thought to contribute to the work softening of Zn-15%Al alloy.

• Composites Research
• /
• 제33권6호
• /
• pp.329-335
• /
• 2020

본 연구에서는 각각에 다른 연화점을 갖는 석유계 피치의 열 유변학적 특성을 연구하였으며, 이를 함침용 페놀수지에 석유계 피치를 첨가하여 B-stage 형태의 페놀수지/석유계 피치 혼합물을 제조하였다. 그 결과, 연화점이 다른 석유계 피치는 QI의 함량이 증가할수록 피치의 유동성이 감소하였고, 고체의 점탄성 특성을 나타내었다. 또한, 다른 연화점을 갖는 석유계 피치를 페놀수지에 첨가함으로써, 페놀수지의 경화거동과 열 유변학적 특성에 미치는 영향에 대해 고찰하였을 때, 다른 연화점의 석유계 피치를 첨가함에 따라 페놀수지의 경화속도 및 경화거동을 조절할 수 있었으며, 이 중 P-Pitch 2가 첨가된 페놀수지 혼합물의 경우 동일한 경화 온도조건에서 다른 혼합물에 비해 유동성이 높은 것을 확인할 수 있었다.

• 한국식품영양학회지
• /
• 제14권5호
• /
• pp.385-390
• /
• 2001

1. 비가열 시료인 a와 b가 PE의 활성은 저장 둘째 주에 급격히 증가하다가 감소하였고, 가열 시료인 c 는 저장 넷째 주에 증가하다가 감소하였고, 병행 열처리와 trehalose 처리 시료는 저장 끝까지도 증가하였다. 2. PG의 활성은 비가열 시료인 a와 b는 저장 둘째 주부터 감소하다 저장 끝에는 증가하였고, 가열 시료인 c와 d는 저장 기간 동안 변화가 거의 없었다. 3. POD의 활성은 비가열 시료인 a와 b는 저장 둘째 주에 증가하다 감소하였고, 가열 시료인 c는 둘째 주에 약간씩 감소하였고, 병용 열처리하고 trehalose 처리군은 감소하였다. 4. 관능검사 결과 시료 a. b, d는 아작함과 기호도가 전 저장 기간동안 높았고, 시료 c는 갈색과 신맛의 증가로 기호도가 낮았다 저장기간에 따라서는 2주차에는 아작함과 형태가 좋았으나 4주 6주로 가면서 아작함과 기호도의 값이 감소하였다. 그리고 각 시료별 기호도에 가장 영향을 주는 항목은 아작함이었고 시료 c는 갈색, 맛, 조직감 등에서 음의 관계를 나타냈다.