• Journal of the Korean Wood Science and Technology
• /
• v.38 no.2
• /
• pp.149-158
• /
• 2010

Organosolv pretreatments which utilized sulfuric acid, sodium hydroxide and ammonia as catalysts were conducted to screen the effective catalyst for organosolv pretreatment of Liriodendron tulipifera. The enzymatic hydrolysis was achieved effectively with sulfuric acid (74.2%) and sodium hydroxide (63.7%). They were thus considered as effective catalysts for organosolv pretreatment of L. tulipifera. The organosolv pretreatments with sulfuric acid and sodium hydroxide showed a different behavior on the reaction mechanism. The pretreatment with sulfuric acid increased the biomass roughness and pore numbers. On the other hand, the pretreatment with sodium hydroxide enhanced the surface area due to the size reduction and minor defiberization which were caused by hemicellulose degradation at an initial stage and more defiberization by lignin degradation at a later stage. The organosolv pretreatment with sodium hydroxide was performed at several different conditions to evaluate effectiveness of sodium hydroxide as a catalyst for organosolv pretreatment. According to the results of enzymatic digestibility, the changes of chemical composition and the morphological analysis of pretreated biomass, it was suggested that the pretreatment time impacted primarily on enzymatic hydrolysis. Increase in surface area during the pretreatment was a major cause for improvement in enzymatic digestibility when sodium hydroxide was used as a catalyst.

• Advances in Energy Research
• /
• v.4 no.3
• /
• pp.189-202
• /
• 2016

This work emphasized optimum production of biodiesel using non-edible Prunus armeniaca (Bitter Apricot) oil via transesterification collected from the high altitude areas of Himachal Pradesh, India. In this study the author produced biodiesel through the process of transesterification by using an alkali catalyst with alcohol (methanol and ethanol), under the varying molar ratio (1:6, 1:9, 1:12), variable catalyst percentage (1% and 2%) and temperature ($70^{\circ}C$, $75^{\circ}C$, $80^{\circ}C$, $85^{\circ}C$). Furthermore, a few strong base catalysts were used that includes sodium hydroxide, potassium hydroxide, sodium metal and freshly prepared sodium methoxide. After screening the catalyst, response surface methodology (RSM) in connection with the central composite design (CCD) was used to statistically evaluate and optimize the biodiesel production operation using NaOH as catalyst. It was found that the production of biodiesel achieved an optimum level biodiesel yield with 97.30% FAME conversion under the following reaction conditions: 1) Methanol/oil molar ratio: 1:6, 2) Reaction time: 3h, 3) Catalyst amount: NaOH 2 wt. %, and 4) Reaction temperature: $85^{\circ}C$. The experimental results showed that the optimum production and conversion of biodiesel through the process of transesterification could be achieved under an optimal set of reaction conditions. The biodiesel obtained showed appropriate fuel properties as specified in ASTM, BIS and En- standards.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.301-310
• /
• 2018

Various catalysts such as formic acid, acetic acid, sodium hydroxide, sodium bicarbonate, carbon dioxide and nitrogen gas were used for hydrolyzates production from deoiled mackerel muscle by subcritical water hydrolysis. Above 99% hydrolysis yield was obtained using sodium bicarbonate catalyst at $260^{\circ}C/70bar$. Histamine and heavy metals concentration were reduced in hydrolyzates. Highest amount of amino acid (400.36 mg/g) and reducing sugar (24.75 mg/g) were found in hydrolyzate obtained at $260^{\circ}C/70bar$ and $220^{\circ}C/30bar$, respectively with sodium bicarbonate catalyst. Antioxidant and ACE-inhibitory activities were significantly higher in hydrolyzates obtained using sodium bicarbonate than that of others.

• Journal of Forest and Environmental Science
• /
• v.29 no.2
• /
• pp.125-130
• /
• 2013

An attempt was made on pulp production from the fast growing plant, Acacia hybrid to determine the total yield, screened yield, Kappa number, and fibre morphology of organosolv Acacia hybrid pulp. Uniform-sized chips were taken to undergo pulping in a digester with five different concentrations of ethanol, 50%, 60%, 70%, 80% and 90% (v/v) with 1 M of sodium hydroxide as catalyst. All chips were digested in a temperature-controlled digester with constant amount of water added and temperature of $185^{\circ}C$ with the duration of three hours cooking time and correspond pressure 1.1-1.2 MPa. It was observed that increasing of ethanol concentration has led to pulp yield increment and decreased in the degree of delignification at the same time. This study was aimed to focus on the effect of the varied concentration of organic solvent towards the pulp yield and its relationship with Kappa number and pulp yield.

• Journal of Hydrogen and New Energy
• /
• v.33 no.4
• /
• pp.343-352
• /
• 2022

Co/Al₂O₃ nanopowder was used as a catalyst to investigate the effect of catalyst support, reduction temperature, sodium borohydride (NaBH₄) concentration, sodium hydroxide (NaOH) concentration, and reaction temperature on the characteristics of NaBH₄ hydrolysis. The Co/Al₂O₃ nanopowder showed a high catalytic activity among various catalysts. Catalyst reduction at 250℃ exhibited a relatively good activity. The activity decreased with an increase in the NaBH₄ concentration. Conversely, the activity increased and then decreased with an increase in the NaOH concentration. Additionally, the activity increased with an increase in the reaction temperature. The value of apparent activation energy was 40.81 kJ/mol, which was lower than the other Co-based catalysts. Thus, Co/Al₂O₃ nanopowder catalyst can be widely used for NaBH₄ hydrolysis owing to its superior catalytic activity.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.3
• /
• pp.299-312
• /
• 2008

The fat of Tra and Basa catfish (Mekong Delta, Viet Nam) was evaluated for the first time as the potential feedstock for biodiesel production, due to its abundance, availability and cheap cost. The unsaturated fatty acid contents of Tra and Basa fat were 57.97% and 64.17%, respectively. Biodiesel was prepared from Tra and Basa fat by methanolysis reaction using alkali catalysts like sodium hydroxide and potassium hydroxide. Effects of various process parameters on biodiesel production, such as molar ratio of methanol to fat, catalyst concentration, temperature and time were investigated. As those results, the transesterification can be performed under moderate conditions, and the biodiesel yields were shown more than 90%. KOH catalyst was the best catalyst for biodiesel production from both Basa and Tra fat. As the feedstock aspect, Basa fat was indicated more efficiency than that of Tra fat. The maximum yield could be achieved by the transesterification from Basa fat with 5:1 molar ratio of methanol to fat, 0.8% KOH catalyst, $50^{\circ}C$, and 50 min. For Tra fat, the optimal condition were at 6:1 molar ratio of methanol to fat, 0.8% KOH catalyst, $50^{\circ}C$, and 45 min. Nowadays, due to cheaper cost and abundance, Tra fat is a promised resource for cheap biodiesel production in Viet Nam.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.109-112
• /
• 2008

A performance of micro thruster was measured with catalyst bed that was prepared by different catalyst loading condition for the optimization of catalyst bed size. Among the catalyst loading conditions, pH level of precursor solution was changed by several solutions like Nitric acid or Sodium hydroxide. For the each case, it was heated at different drying temperatures that can affect the phase of catalyst loaded on support. From these results, it was studied that the effect of catalyst loading condition on the performance. 90wt% hydrogen peroxide was used as a monopropellant, and platinum was chosen as a catalyst. Characteristic velocity efficiency and temperature efficiency were used for the performance evaluation.

• Journal of Mechanical Science and Technology
• /
• v.19 no.10
• /
• pp.1902-1909
• /
• 2005

A process for production of ethyl ester for use as biodiesel has been studied. The sodium hydroxide catalyzed transesterification of soybean oil with ethanol was carried out at different molar ratio of alcohol to oil, reaction temperature and catalyst amount for a constant agitation in two hours of reaction time. Central composite design and response surface methodology were used to determine optimum condition for producing biodiesel. It was found that ethanol to oil ratio and catalyst concentration have a positive influence on ester conversion as well as interaction effects between the three factors considered. An empirical model obtained was able to predict conversion as a function of ethanol to oil molar ratio, reaction temperature and catalyst concentration adequately. Optimum condition for soybean ethyl ester production was found to be moderate ethanol to oil ratio (10.5: 1), mild temperature range ($70^{\circ}C$) and high catalyst concentrations ($1.0\%$wt), with corresponding ester conversion of $93.0\%$.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.1
• /
• pp.12-18
• /
• 2006

The transesterification of vegetable oils into Biodiesel at $60^{\circ}C$ was performed on the rotary viscometer. The overall yield(%) of fatty acid methyl ester from canola oil at optimum conditions was 95%. The viscosities of fatty acid methyl esters were predicted by Orrick and Erbarr's model. The overall yield increased as the viscosities of fatty acid methyl esters decreased. The limiting molar ratio of methanol to oil appeared to be 1:5. The content of sodium hydroxide as the optimum catalyst appeared to be 0.5wt%.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.4
• /
• pp.327-334
• /
• 2002

Transesterfication of vegetable oils and methanol with alkaline catalyst was carried out to produce biodiesel fuel by continuous process. The process consists of two static mixers, one tubular reactor and two coolers and gave $96{\sim}99$% of methyl ester yield from soybean oil and rapeseed oil. Experimental variables were the molar ratios of methanol to vegetable oil, alkaline catalyst contents, flow rates, mixer element number. The optimum ranges of operating variables were as follows; reaction temperature of $70^{\circ}C$, l:6 of molar ratio of methanol to oil, O.4%(w/w) sodium hydroxide based on oil, static mixer elements number of 24 and 4 min. residence time.