• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.8-16
• /
• 2013

Currently, global warming has advanced by the usage of fossil fuels such as coal and petroleum. and the atmosphere temperature in the world of 100 years(1906~2005) has been risen $0.74^{\circ}C{\pm}0.18^{\circ}C$, IPCC announced that the global warming effect of last decade was nearly doubled compared to the changes($0.07^{\circ}C{\pm}0.02^{\circ}C$/10year) in the past 100 years. Moreover, due to the global warming, heat wave, heavy snow, heavy rain, super typhoon, were caused and are increasing to happen in the world continuously causing damages and destruction of social infrastructures, where concrete structures are suffering deterioration by long-term extreme climate changes. to solve these problems, the new construction technology and codes are necessary. In this study, to solve these problems, experiments on a variety of cases considering the temperature and humidity, the main factors of climate factors, were performed, and the cases are decided by temperature and humidity. The specimens were tested in compressive strength test and split tensile test by the curing age(3,7,28 days) morever, performance based design(PBD) method was applied by using the satisfaction curve developed from the experiment date. PBD is the design method that gathers the current experimental analysis and past experimental analysis and develops the material properties required for the structure, and carries out the design of concrete mix, and it is recently studied actively worldwide. Also, it is the ultimate goal of PBD to design and perform on structures have sufficient performance during usage and to provide the problem solving for various situations, Also, it can achieve maximum effect in terms of functionality and economy.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.3
• /
• pp.201-207
• /
• 2019

In this study, the direct tensile properties of amorphous metallic fiber-reinforced cement based composites according to the strain was evaluated. A thin plate-shape amorphous metallic fiber with 15mm and 30mm in length was used. And fiber-reinforced cement based composites were prepared with contents of 1.0, 1.5, 2.0%. The direct tensile test was conducted under the conditions of $10^{-6}/s(static)$ and $10^1/s(dynamic)$ strain rate. As a results, amorphous metallic fiber with a length of 15mm was observed in pull-out behavior from the cement matrix because of the short fiber length and large portion of mixed fiber. On the other hand, amorphous metallic fiber with a length of 30mm were not pulled out from matrix because the bonding force between the fiber and matrix was large due to rough surface and large specific surface area. However, fracture occurred because thin plate shape fibers were vulnerable to shear force. Tensile strength, strain capacity and toughness were improved due to the increase in the fiber length. The dynamic increase factor of L15 was larger that of L30 because the bonding performance of the fiber-matrix interface is significantly affected by the strain rate.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.528-536
• /
• 2020

In this study, high strength mortar and normal strength mortar using waste glass sand were evaluated. The main parameters studied were mechanical properties, alkali-silica reaction(ASR) and residual mechanical properties after ASR. As a result of this experiment, it was found that the increase in strength of the mortar has a limitation in improving the slip of the waste glass sand(GS), and rather, it causes a larger ASR. However, the possibility of improving the slip of GS was confirmed by the temporary increase of initial residal compressive and flexural strength of the mortar containing GS after the ASR. Therefore, to improve the slip of GS, the additional research is required, such as modification of the surface of GS and the incorporation of a binder which can increase the strength and makes matrix compact.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.813-816
• /
• 2008

The increasing number of vehicles owned by individuals in association with the rising income resulted in an acute shortage of parking spaces. We are not only seeing a serious traffic congestion arising from the vehicles parked in the streets adjacent to apartment buildings, but also the social issues of not being able to properly prepare for the emergency such as breakout of fires. Although remodeling of old apartment buildings are being discussed in measures to these problems, the research of parking space expansion is still insufficient. In a survey on remodeling of old apartment buildings, over 30 percent of those who answered cited the parking space as the most needed improvement and said they preferred direct entry as a way to expand parking space among lateral underground expansion methods. The direct entry is a method in which one directly enters the apartment house from the parking lot through the elevator and it requires extended operation of elevators. However, because there are no established systematic processes for elevator extension and works of such kinds are not common, elevator extension works are being done in an inefficient manner. In this research we reanalyzed the processes in order to present the items to be examined for more efficient elevator extension works, and through interviews of experts in the field, we produced the examination items by process from the perspectives of management and technology. This research will be used as a reference material for elevator extension works associated with expanding underground parking lot of apartment buildings.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.2
• /
• pp.69-79
• /
• 2019

The coastal area forms various sedimentary layers according to the environmental conditions such as the topography and geological features of the upper region of the river, ocean currents, and river mouth. Therefore, identifying the characteristics of the marine clay deposited in the coastal area plays a key role in the investigation of the formation of soft ground. In general, alluvial grounds are formed by a variety of factors such as changes in topography and natural environment, they have very diverse qualities depending on the deposited region or sedimentation conditions. The most important thing for the construction of social infrastructures in soft ground areas is economical and efficient treatment of soft ground. In this study, the author collected data from diverse laboratory and field tests on five areas in western and southern offshore with relatively high reliability, and then statistically analyzed them, thereby presenting standard constants for construction design. Correlation between design parameters such as over consolidation ratio, preconsolidation pressure was analyzed using linear and non-linear regression analyses. Also, proposed distribution characteristics of design parameters in consideration of each region's uncertainty through statistical analyses such as normality verification, outlier removal.

• Journal of Engineering Education Research
• /
• v.13 no.6
• /
• pp.152-163
• /
• 2010

Civil engineering based on construction and maintenance of infrastructures for social and human development, it has a conservative aspects to adopt the high-technology and pace of change from ancient society. Therefore, the education of civil engineering consists of very similar contents from the past until now. Also, civil engineering, area is established the infrastructure widely included structure, geotechnical, hydraulic, environmental, surveying, construction management. Civil engineering have totally difference characteristics compared to manufacturing industry field for market interests such as mechanical engineering, chemical engineering, material engineering etc. Therefore, the capstone design concepts of civil engineering for public interests must be changed and applied unlike any other engineering areas capstone design. In this paper, the modified capstone design contents and instruction in civil engineering of Yonsei University is informed and evaluated using undergraduate students' course evaluations and learning assessment to verify the efficiency of modified capstone design in civil engineering.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.3
• /
• pp.82-92
• /
• 2014

The ratio of using soil as the main material in construction is quite numerous, and it covers many parts in forms and bases of the structure. Thus, the earthwork forms many structures for social infrastructure, and the stability of these structures is most crucial when completed than under construction. This study executed a field experiment to evaluate the accuracy and utility of the slope, which is an important part in earthwork, when terrestrial LiDAR is obtained, and the results are as follow. First, as the result of the observation using Total Station and terrestrial LiDAR, the horizontal error RMSE was ${\pm}2.2cm$, and the vertical error RMSE was ${\pm}3.0cm$. As the result of the comparison between the errors and permissible range of public surveying regulation, it sufficiently secure the accuracy. Also, the extraction of the check section, which covers the most important part among the stability checks could be scientifically and rationally processed, and these extraction results are expected to be provided as important basic materials for the earthwork slop stability evaluation.

• Journal of Science and Technology Studies
• /
• v.18 no.2
• /
• pp.181-232
• /
• 2018

To explore the history of Korean engineers, one must navigate the field answering to the question of who engineers are. This is not an easy task because, behind the English expression of engineer, there are various names and even histories pertaining to technology related actors in East Asian countries including South Korea, and the meaning and status of these names are different from one another. Thus, the process and method of answering to the question of who engineers are becomes the path to understanding the history of Korean engineers. This study, therefore, attempts to suggest research questions that should be raised to study Korean engineers and to find research methodology suited for addressing those questions. Until now, not enough efforts have been made to create and expand interdisciplinary discussions and contacts for this area of study. This study has some theoretical difficulties of having to combine concepts with different problematique. Nevertheless, it aims to discuss how to conduct research, what questions should be posed to analyze the construction of Korean engineers and what research methodologies are suitable for such research, based on previous researches conducted in the field of social science. Answers to the quest are sought through genealogy, conceptual history, actor-network theory, and the notion of techno-national formation.

• Explosives and Blasting
• /
• v.39 no.4
• /
• pp.22-33
• /
• 2021

Recently, the frequent occurrence of ground subsidence in urban areas has caused increasing anxiety in residents and incurred significant social costs. Among the causes of ground subsidence, the rupture of old water and sewer pipes not only halts the operation of the buried pipes, but also leads to ground and water pollution problems. However, because most pipes are buried after construction and cannot be seen with the naked eye, the importance of maintenance has underestimated compared to other structures. In recent years, integrated physical exploration has been applied to the maintenance of underground pipes and structures. Currently, to investigate the internal conditions and vulnerable portions of the ground, consolidated physical surveys are executed. Consolidated physical surveys are analysis techniques that obtain various material data and add existing data using multiple physical surveys. Generally, in geotechnical engineering, consolidated physical surveys including electrical and surface wave surveys are adopted. However, it is difficult to investigate time-based changes in under ground using these surveys. In contrast, surveys using cosmic-ray muons have been used to scan the inner parts of nuclear reactors with penetration technology. Surveys using muons enable real-time observation without the influence of vibration or electricity. Such surveys have great potential for available technology because of their ability to investigate density distributions without requiring as much labor. In this paper, survey technologies using cosmic ray muons are introduced, and the possibilities of applying such technologies as new physical survey technologies for underground structures are suggested.

• Korean small business review
• /
• v.42 no.4
• /
• pp.251-283
• /
• 2020

The purpose of this study is to provide assistance to the establishment of related policies to improve the level of acceptance and use of smart factories for SMEs in Korea. To this end, the Unified Technology Acceptance Model (UTAUT) was extended to select additional factors that could affect the intention to accept technology, and to demonstrate this. To achieve the research objective, a questionnaire composed of 7-point Likert scales was prepared, and a survey was conducted for manufacturing-related companies. A total of 136 questionnaires were used for statistical processing. As a result of the hypothesis test, performance expectation and social influence had a positive (+) positive effect on voluntary use, but effort expectation and promotion conditions did not have a significant effect. As an extension factor, the network effect and organizational characteristics had a positive (+) effect, and the innovation resistance had a negative effect (-), but the perceived risk had no significant effect. When the size of the company is large, the perceived risk and innovation resistance are low, and the level of influencing factors for veterinary intentions, veterinary intentions, and veterinary behaviors are excluded. Through this study, factors that could have a positive and negative effect on the adoption (reduction) of smart factory-related technologies were identified and factors to be improved and factors to be reduced were suggested. As a result, this study suggests that smart factory-related technologies should be accepted.