• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3B
• /
• pp.235-246
• /
• 2009

The number of industry wireless networks based on IEEE 802.11 WLAN technology deployed in large outdoor work sites, such as freight container terminal, is increasing these days. Wider service coverage, frequent movements of stations and high requirement on service reliability are main characteristics of these networks compared to the conventional IEEE 802.11 networks used in home, office and school. While the importance of these networks Bets higher, we can hardly find previous studies including concrete analysis on these networks based on actual experiments. We carried out several field experiments at a freight container terminal to analyze its IEEE 802.11 network and found out some problematic situations, such as over 50% retransmission rates and frequent disruption of communication link while a station is moving. We explain why these problematic situations happen and suggest some solutions, such as application of mesh technology, smart handoff based on location and movement pattern and adjustment of signal strength and channel allocation. Methods and tools used in the experiments are also detailed in the paper which may be helpful for similar future studies.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.63-70
• /
• 2011

A bicycle is different from vehicles in the structure that a rider is fully exposed to the surrounding environment. Therefore, it needs to make use of prior information about local weather, air quality, trail road condition. Moreover, since it depends on human power for moving, it should acquire route property such as hill slope, winding, and road surface to improve its efficiency in everyday use. Recent mobile applications which are to be used during bicycle riding let us aware of the necessity of development of intelligent bicycles. This study aims to develop a riding state (up-hill, down-hill, accelerating, braking) recognition algorithm using a low-power wrist watch type embedded system which has 3-axis accelerometer and wireless communication capability. The developed algorithm was applied to 19 experimental riding data and showed more than 95% of correct recognition over 83.3% of the total dataset. The altitude and temperature sensor also in the embedded system mounted on the bicycle is being used to improve the accuracy of the algorithm. The developed riding state recognition algorithm is expected to be a platform technology for intelligent bicycle interface system.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.5
• /
• pp.91-104
• /
• 2016

The major results of the study are as follows: First, the accomplishement needs and academic self-efficacy enables students with start-up education through studying immersion and entrepreneurship to set up realistic objectives for personal life and resolving unpredictable problems. Second, creativity does not significantly affect studying immersion, but the higher the creativity of students participating in start-up education, the higher the entrepreneurship compare to studying immersion. Third, studying immersion has a significant impact on entrepreneurship, but has less impact on student's intention for start-up. Students with higher studying immersion through start-up education has higher entrepreneurship spirit and as a result, higher intention for start-up. Finally, the limitation of the study was that the sample was taken only from the freshman of Soonchunhyang University. Therefore, further study is needed for students from all university with start-up education.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.34-41
• /
• 2011

At present wireless internet access service is available through the 3G network, mobile WiMAX and WiFi anytime and anywhere. In this environment where there are various networks, users should be able to select specific networks depending on different situations. And it is necessary to provide mobility support between homogeneous and between heterogenous networks. Given this situation, the many proposals have been presented to link 3G, which has the largest service area among various networks, with mobile WiMAX(IEEE 802.16e), or with WiFi(IEEE 802.11). But, recently, with the increasing volume of wireless internet use and wireless internet data, due to the advents of net-book, e-book and smart phone, the service area of WiFi and mobile WiMAX has rapidly expanded. Especially, the availability of real-time application such as internet phone has led to the relative shrinking of the proportion of 3G mobile communication network giving conventional voice service, and enlargement of those of wireless internet access networks like WiFi and mobile WiMAX. This paper suggests a handover scheme based on PMIPv6, whitch support mobility between WiFi and mobile WiMAX, and minimizes handover delay. In this scheme, the mobile node has a dual stack structure composed of two interfaces-WiFi and mobile WiMAX. Since WiFi dose not support mobility, it is suggested that the mobile node have the capacity to deal with handover signaling between gateway in case of handover between homogeneous networks. This handover scheme, suggested comparing with current handovers between homogeneous networks, has proved, in its analytic evaluation, to be able to reduce handover, transmission, and signaling overhead.

• Smart Structures and Systems
• /
• v.4 no.2
• /
• pp.221-232
• /
• 2008

This paper represents the final results of a research program sponsored by the European Commission through project WIND-CHIME ($\underline{W}$ide Range Non-$\underline{IN}$trusive $\underline{D}$evices toward $\underline{C}$onservation of $\underline{HI}$storical Monuments in the $\underline{ME}$diterranean Area), in which the possibility of using advanced seismic protection technologies to preserve historical monuments in the Mediterranean area is investigated. In the current research, the dynamic characteristics of two outstanding Mamluk-Style minarets, which similar minarets were reported to experience extensive damage during Dahshur 1992 earthquake, are investigated. The first minaret is the Qusun minaret (1337 A.D, 736 Hijri Date (H.D)) located in El-Suyuti cemetery on the southern side of the Salah El-Din citadel. The minaret is currently separated from the surrounding building and is directly resting on the ground (no vaults underneath). The total height of the minaret is 40.28 meters with a base rectangular shaft of about 5.42 ${\times}$ 5.20 m. The second minaret is the southern minaret of Al-Sultaniya (1340 A.D, 739 H.D). It is located about 30.0 meters from Qusun minaret, and it is now standing alone but it seems that it used to be attached to a huge unidentified structure. The style of the minaret and its size attribute it to the first half of the fourteenth century. The minaret total height is 36.69 meters and has a 4.48 ${\times}$ 4.48 m rectangular base. Field investigations were conducted to obtain: (a) geometrical description of the minarets, (b) material properties of the minarets' stones, and (c) soil conditions at the minarets' location. Ambient vibration tests were performed to determine the modal parameters of the minarets such as natural frequencies and mode shapes. A $1/16^{th}$ scale model of Qusun minaret was constructed at Cairo University Concrete Research Laboratory and tested under free vibration with and without SMA wire dampers. The contribution of SMA wire dampers to the structural damping coefficient was evaluated under different vertical loads and vibration amplitudes. Experimental results were used along with the field investigation data to develop a realistic 3-D finite element model that can be used for seismic risk evaluation of the minarets. Examining the updated finite element models under different seismic excitations indicated the vulnerability of such structures to earthquakes with medium to high a/v ratio. The use of SMA wire dampers was found feasible for reducing the seismic risk for this type of structures.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.269-272
• /
• 2015

this is the study of the human body antenna device which can detect the powder in a 360-degree on(under) the ground whether it is metal or nonmetal using superhigh frequency RF beam equipped with the body. and it is able to transmit the data of the detection of the powder, battle combats can share that among them. with its flexible roof radial antenna structure, it emits the superhigh frequency RF beam to the front and flank multiply, preprocesses through the powder preprocessing part. and with the non-linear regression model algorism engine part, reflecting the attenuation characteristics depend on the delayed time of degree of the signal power which is received to the superhigh frequency RF beam. so it is able to detect the signal of the most likely mine or powder based on the degree of the answer signal power according to the delayed time of the superhigh frequency RF beam. also, it can detect the powder whether it is metal or nonmetal, mine, dud, VBIED. it can increase the chance of detection about 90% more than existing mine detector.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.7
• /
• pp.52-60
• /
• 2010

In this paper, we propose a dynamic power management framework for multi-core systems. We reduced the power consumption of multi-core processors such as Intel Centrino Duo and ARM11 MPCore, which have been used at the consumer electronics and personal computer market. Each processor uses a different technique to save its power usage, but there is no embedded multi-core processor which has a precise power control mechanism such as dynamic voltage scaling technique. The proposed dynamic power management framework is suitable for smart phones which have an operating system to provide multi-processing capability. Basically, our framework follows an intuitive idea that reducing the power consumption of idle cores is the most effective way to save the overall power consumption of a multi-core processor. We could minimize the energy consumption used by idle cores with application-targeted policies that reflect the characteristics of active workloads. We defined some properties of an application to analyze the performance requirement in real time and automated the management process to verify the result quickly. We tested the proposed framework with popular processors such as Intel Centrino Duo and ARM11 MPCore, and were able to find that our framework dynamically reduced the power consumption of multi-core processors and satisfied the performance requirement of each program.

• Journal of Digital Contents Society
• /
• v.13 no.3
• /
• pp.393-399
• /
• 2012

New and creative skills must be developed, and adapted into a lesson, to motivate learners to acquire a second language easily and enjoyment, Multimedia tools which are of interest to learners, such as; smart phones, computers, and notebooks with wireless internet compatability, will provide learners opportunities to study, and do their work practically anywhere and anytime. Recently, podcasts, which are a type of digital media, consisting of a series of audio episodes or video files, subscribed to and downloaded through web syndication, or streamed online to a computer or mobile device, are used to facilitate ESL (English as a Second Language) learning. Development of a variety of teaching methods, using multimedia tools, is needed. There are advantages and disadvantages to using a variety of multimedia tools. The current research aims to study its characteristics and application, in order to maximize their effective use, in English education. The current study suggests a ubiquitous learning environment using multimedia content tools, internet media, video teleconferencing, cyber-learning, and one-to-one videos used in conjunction with, or as a digital textbook for the English lesson. This study also investigates future educational changes, using state-of-the-art equipment for the self-learning experience, and will present a new direction in English education, through a variety of instructional devices and a marginalized class system model.

• Smart Structures and Systems
• /
• v.26 no.5
• /
• pp.575-589
• /
• 2020

For vibration control of stay cables in cable-stayed bridges, viscous dampers are frequently used, and they are regularly installed between the cable and the bridge deck. In practice, neoprene rubber bushings (or of other types) are also widely installed inside the cable guide pipe, mainly for reducing the bending stresses of the cable near its anchorages. Therefore, it is important to understand the effect of the bushings on the performance of the external damper. Besides, for long cables, external dampers installed at a single position near a cable end can no longer provide enough damping due to the sag effect and the limited installation distance. It is thus of interest to improve cable damping by additionally installing dampers inside the guide pipe. This paper hence studies the combined effects of an external damper and an internal damper (which can also model the bushings) on a stay cable. The internal damper is assumed to be a High Damping Rubber (HDR) damper, and the external damper is considered to be a viscous damper with intrinsic stiffness, and the cable sag is also considered. Both the cases when the two dampers are installed close to one cable end and respectively close to the two cable ends are studied. Asymptotic design formulas are derived for both cases considering that the dampers are close to the cable ends. It is shown that when the two dampers are placed close to different cable ends, their combined damping effects are approximately the sum of their separate contributions, regardless of small cable sag and damper intrinsic stiffness. When the two dampers are installed close to the same end, maximum damping that can be achieved by the external damper is generally degraded, regardless of properties of the HDR damper. Field tests on an existing cable-stayed bridge have further validated the influence of the internal damper on the performance of the external damper. The results suggest that the HDR is optimally placed in the guide pipe of the cable-pylon anchorage when installing viscous dampers at one position is insufficient. When an HDR damper or the bushing has to be installed near the external damper, their combined damping effects need to be evaluated using the presented methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.671-674
• /
• 2012

Recently, depending on the development of smart devices, a variable services have been offered to meet user's convenience. Due to these advance, the needs of users are extremely being diversified and more specific. In that situation, the needs for the N-Screen system has been varied and gradually evolved. An existing N-Screen system that use the way of video streaming upload its multimedia contents to their own cloud server so that might take a long play-reaction time and the number of user is limited by the server's performance. Because of the web based protocol adopted by existing N-Screen system, there are many different problems like high delay, overhead and something caused by simplex data communications. Therefore, to solve the problems above, this study proposes an application based on HTML5. This application supports Video tag and Progressive download via HTML5 so that improves the play-reaction time for multimedia contents. This system can also get rid of the chronic problems such as an access limitation for lots of users as per video streaming encoding. Also, through web sockets, this study proposes a system that has lower delay than the existing system and communicates in full duplex to be able to link dynamically.