• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.643-653
• /
• 2007

Average hydraulic conductivity was $2.64{\times}10^{-8}m/sec$ average RQD was 78%, average porosity was 0.51%, and range of groundwater level was $77.06{\sim}125.97m$ by measured in 8 boreholes at the Surak Mt. tunnel area. Groundwater level of two peaks in the Surak Mt. tunnel area were estimated through linear regression analysis for groundwater level versus elevation. And, average horizontal hydraulic gradient in the Surak Mt. tunnel area was calculated 0.267. Minimum, maximum, and average hydraulic conductivities that estimated by field tests were $5.56{\times}10^{-9}m/sec,\;6.12{\times}10^{-8}m/sec,\;and\;2.64{\times}10^{-8}m/sec$, respectively. Groundwater discharge rates per 1 meter that estimated using minimum, maximum, and average hydraulic conductivities and average horizontal hydraulic gradient were $0.00585m^2/day,\;0.06434m^2/day,\;and\;0.02775m^2/day$, respectively. Pure groundwater recharge rate per unit recharge area was calculated 223.96 mm/yr through water balance analysis. Prediction simulation of groundwater level fluctuation with minimum, maximum, and average hydraulic conductivities were conducted. Discharge rate into the Surak Mt. tunnel for minimum hydraulic conductivity was small, but groundwaer drawdown was highly. Discharge rate into the Surak Mt. tunnel for maximum hydraulic conductivity was higher, but groundwaer level was recovered quickly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5355-5362
• /
• 2014

This study reviewed the planning characteristics of dormitories for secondary schools in the Japanese Colonial Era by analyzing the architectural drawings collected by the National Archives of Korea. The dormitory was one of the essential facilities in secondary schools but there have been few studies in this area. The analysis items were the site plan and the planning characteristics of student bedrooms, dining hall, and supervisor's area, which were the main elements of the dormitory. The results of this study were summarized as follows. 1) Generally, the dormitory area was placed in the rear of buildings for teaching with a close connection. 2) The student bedroom wings were laid out in parallel to the south as a rule making the typical site plan pattern for a dormitory, whereas the other parts of dormitory, such as the dining hall and supervisor's area were placed in the site conditions. 3) Generally, the unit plans of bedrooms for Korean schools were the ondol type and were small in size, whereas those for Japanese were the tatami type and large in size with separate study and sleeping areas. 4) The dining hall annex was made up of a dining hall and kitchen-bathroom area in general. For Japanese schools, the school store area was added to these areas. The typical shapes of dining hall plans were narrow and long with an adjacent corridor, so the overall plan of the dining hall annex was like that of a single-corridor type block plan. 5) The supervisor's area was a smaller part of the dormitory but it was considered to be a symbolic part of the whole dormitory in site planning and design.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.280-289
• /
• 2004

Adequate polymerization is a crucial factor in obtaining optimal physical properties and clinical performance of resin composite restorative materials. The purpose of this study was to determine the effectiveness of shade and depth on dental composite resin polymerized with plasma arc curing unit employing FTIR and microhardness. From this experiment, the following results were obtained : 1. The light transmission and microhardness by mode 6 in plasma arc curing were similar to by 20 secs in halogen light curing. 2. The experimental groups of A1, A2, A3, A3.5 were not signifcant difference to light transmission and microhardness on surface and 2mm depth, but were significant difference on 3mm and 4mm depth. Especially light transmission and microhardness were small in darker shade and deeper thickness. 3. Compared with depth cure, uncured monomer amount increased at more than 2mm depth. 4. The light transmission by FTIR and polymerization by microhardness were significant corelation.

• Clean Technology
• /
• v.4 no.1
• /
• pp.45-59
• /
• 1998

Continuous immobilized-cell culture was carried out for the production of kasugamycin, a secondary metabolite by a filamentous bacteria, Streptomyces kasugaensis, with an intention of reducing waste generation. A sporulation medium was developed for production of bulk amounts of spores, and the spores were entrapped into celite biosupports for immobilization. It was possible to effectively keep the immobilized-cells inside the reactor during the continuous culture by an efficient immobilized cell separator of decantor type on the outlet of the fermentor. Using this continuous immobilized-cell fermentor system, we investigated the effects of feed substrate and phosphate concentrations on kasugamycin production and chemical oxygen demand(COD). Comparing with the conventional suspended-cell batch culture, the kasugamycin productivity was observed to increase by 2.5 times, whereas COD per unit kasugamycin production decreased by 2.3 times in the continuous immobilized-cell culture. Based on these results, the continuous immobilized-cell system was considered to be a cleaner bioprocess than the conventional batch suspended-cell system.

• Plant Journal
• /
• v.10 no.1
• /
• pp.47-53
• /
• 2014

The national capacity of electricity of Korea was 81,737 MW and the peak demand was renewed by the record of 71,230 MW in 2012 which has been increasing since the first lighting ceremony had taken place in the Royal Palace(Kyung-Bok Goong) in 1887. Aa the counteract on the rapid increasing of the demand, Korean government is constructing and operating the high capacity nuclear and thermal power plants, however, the operating reserve on weekdays is small while those of weekends are more than 40% of capacity, so they are providing the pumped-storage power plants with the surplus electricity during weekends and operating the power plants which cost higher production price and located in the capital area with WSS (Weekly Start and Stop) mode including the Seoul Thermal Power Plant. Since the Seoul Thermal Power Plant is spending huge amount of expenses for more than 30 times of the WSS annually due to the high production cost even though it is in Seoul, the core of the demand, I chose the power plant unit #5 which was on the grid in 1969 for the case to confirm reducing 23% of the warm start-up time by applying the "Start-up time management program", and that reducing 35% of the water temperature increasing time by accelerate the increasing rate of the inlet temperature of the water circulating pump.

• Education of Primary School Mathematics
• /
• v.20 no.1
• /
• pp.85-99
• /
• 2017

In order to improve mathematical problem-solving ability, there has been a need for research on practical application of meta-affect which is found to play an important role in problem-solving procedure. In this study, we analyzed the characteristics of the sociodynamical aspects of the meta-affective factor of the successful problem-solving procedure of small groups in the context of collaboration, which is known that it overcomes difficulties in research methods for meta-affect and activates positive meta-affect, and works effectively in actual problem-solving activities. For this purpose, meta-functional type of meta-affect and transact elements of collaboration were identified as the criterion for analysis. This study grasps the characteristics about sociodynamical function of meta-affect that results in successful problem solving by observing and analyzing the case of the transact structure associated with the meta-functional type of meta-affect appearing in actual episode unit of the collaborative mathematical problem-solving activity of elementary school students. The results of this study suggest that it provides practical implications for the implementation of teaching and learning methods of successful mathematical problem solving in the aspect of affective-sociodynamics.

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.105-117
• /
• 2020

Analysis of combat effectiveness is required to consider the concept of tactical cooperative engagement between manned-unmanned weapon systems, in order to predict the required operational capabilities of future weapon systems that meets the concept of 'effect-based synchronized operations.' However, analytical methods such as mathematical and statistical models make it difficult to analyze the effects of complex systems under nonlinear warfare. In this paper, we propose a combat simulation model that can simulate the concept of cooperative engagement between manned-unmanned combat entities based on wireless communications. First, we model unmanned combat entities, e.g., unmanned ground vehicles and drones, and manned combat entities, e.g., combatants and artillery, considering the capabilities required by the future ground system. We also simulate tactical behavior in which all entities perform their mission while sharing battlefield situation information through wireless communications. Finally we explore the feasibility of the proposed model by analyzing combat effectiveness such as target acquisition rate, remote control success rate, reconnaissance lead time, survival rate, and enemy's loss rate under a small-unit armor reconnaissance scenario. The proposed model is expected to be used in war-game combat experiments as well as analysis of the effects of manned-unmanned ground weapons.

• Korean Journal of Environment and Ecology
• /
• v.27 no.5
• /
• pp.614-624
• /
• 2013

The purpose of this study is to offer the raw data for establishing the plan of disaster prevention and the continuous conservation of soil ecosystem by grasping the potential soil loss and the danger of erosion using RUSLE method on whole districts in Gyeongju National Park, Korea. In the results of the average amount of soil erosion for the year, the average of all districts was 5.7 ton/ha in annual, and Namsan district was the highest in 7.6 ton/ha in annual and Seoak district was the lowest in 2.1 ton/ha in annual. The dangerous district due to the soil erosion was analyzed as under 1%, and Gumisan and Hwarange district was not serious. But Namsan district was higher than others, especially, there was intensive in all over Geumohbong. Therefore, to protect the all over Geumohbong, we will establish the valid of restoration and management. The types of land cover in Gyeongju National Park mostly showed forest, and as the average amount of soil erosion in forest was 3.7 ton/ha in annual, there was good condition. In the results of the amount of soil erosion due to landform, the deep canyon showed as 7.3 ton/ha in annual per unit area, secondly, the U-shaped valley was analyzed as 6.1 ton/ha in annual. The plain and high ridge were predicted that there occurred the small amount of soil erosion. In future, if we will analyze the amount of soil erosion in Korean National Parks, we will offer the help to establishing the plan of conservation and restoration on soil ecosystem in whole National Parks.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.269-274
• /
• 2013

To proportionally control the electronic valve position of the actuator, we designed and fabricated PCU, CPT, and rotary absolute optical encoder for the detection of absolute angular position in the actuator. We also designed and constructed the test system by using DAQ hardware and Labview. We designed PCU to convert 1-5 V, 0-5 V, 0-10 V, 2-10 V voltage signals and 4-20 mA current signals to the voltage signals in the common 0.5-2.5 V range. We designed CPT to output 4-20 mA current signals corresponding to the valve positions based on the PWM signal input from the MCU. We also designed 20 bit optical encoder by using infrared LED and infrared transistor and made the serial communication with the main board possible. When we tested PCU and CPT with DAQ hardware and Labview software, they operated correctly with the small errors within ${\pm}0.003$ V and ${\pm}0.01$ mA, respectively, showing that our actuator has the excellent performance to employ as the industrial proportional-valve-actuator. The resolution of the encoder was $11.25^{\circ}$ and the maximum revolution to detect was 32,768.

• Journal of the Korean Ceramic Society
• /
• v.43 no.12 s.295
• /
• pp.812-822
• /
• 2006

This study amis to investigate the functional analysis of anode and cathode materials in Anode supported Solid Oxide Fuel Cell. The concentration polarization of single cell was investigated with CFD (Computational Fluid Dynamics) method for the case of the different morphology by using four types of unit cell and discussed to reduce the concentration polarization. The concentration polarization at anode side effected the voltage loss in Anode supported Solid Oxide Fuel Cell and increased contact areas between fuel gas and anode side could reduce the concentration polarization. For intermediate temperature operation, Anode-supported single cells with thin electrolyte layer of YSZ (Yttria-Stabilized Zirconia) were fabricated and short stacks were built and evaluated. We also developed diesel and methane autothermal reforming (ATR) reactors in order to provide fuels to SOFC stacks. Influences of the $H_2O/C$ (steam to carbon ratio), $O_2/C$ (oxygen to carbon ratio) and GHSV (Gas Hourly Space Velocity) on performances of stacks have been investigated. Performance of the stack operated with a diesel reformer was lower than with using hydrogen as a fuel due to lower Nernst voltage and carbon formation at anode side. The stack operated with a natural gas reformer showed similar performances as with using hydrogen. Effects of various reformer parameters such as $H_2O/C$ and $O_2/C$ were carefully investigated. It is found that $O_2/C$ is a sensitive parameter to control stack performance.