• 대한안전경영과학회지
• /
• 제19권4호
• /
• pp.283-290
• /
• 2017

In knowledge information society entering global unlimited competition era, our middle and small sized companies are the base of national and enterprise competitiveness and core base of national economy as an origin of jobs. The competitiveness of middle and small sized companies is so important to decide the level of the competitiveness of the whole industries, but the gap from big sized company is much low in comparison with advanced countries from angles of important factors of enterprise growth, productivity and technological competitiveness, so, it's urgent to improve the competitiveness through productivity enhancement. The purpose of this research is to do a positive study on effects of learning organization management outcomes of middle and small sized company on enterprise productivity among various types of outcome brought for strengthening of enterprise competitiveness. It confirmed learning organization has functions and usefulness as a management tool bringing positive effects on enterprise productivity through the Productivity improvement.

• 한국임상보건과학회지
• /
• 제2권2호
• /
• pp.119-125
• /
• 2014

Purpose. This study was conducted to prove the difference of dominant hand and non dominant hand in hand functions. Methods. We study difference of dominant hand and non dominant hand in hand functions that 40 university students participated in the study and performed a correlation between Jebsen-Taylor Hand Function test, O'conner Finger Dexterity test and Purdue Pegboard test. Results. In left dominant hand are functional of small common object, simulated feeding and large light object in Jebsen-Taylor Hand Function Test. Also O'conner Finger dexterity test are functional in left dominant hand and same result in Purdue pegboard test. Conclusion. The results of this study was left dominant hand is more functional than right dominant hand. So, we suggests that both hand using are improving of hand function in right dominant hand.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제13권1호
• /
• pp.41-53
• /
• 2009

A primal-dual interior point method(IPM) not only is the most efficient method for a computational point of view but also has polynomial complexity. Most of polynomialtime interior point methods(IPMs) are based on the logarithmic barrier functions. Peng et al.([14, 15]) and Roos et al.([3]-[9]) proposed new variants of IPMs based on kernel functions which are called self-regular and eligible functions, respectively. In this paper we define a new kernel function and propose a new IPM based on this kernel function which has $O(n^{\frac{2}{3}}log\frac{n}{\epsilon})$ and $O(\sqrt{n}log\frac{n}{\epsilon})$ iteration bounds for large-update and small-update methods, respectively.

• Journal of the Korean Data and Information Science Society
• /
• 제26권3호
• /
• pp.749-754
• /
• 2015

This article presents Bayesian approach to regression splines with knots on a grid of equally spaced sample quantiles of the independent variables under functional measurement error model.We consider small area model by using penalized splines of non-linear pattern. Specifically, in a basis functions of the regression spline, we use radial basis functions. To fit the model and estimate parameters we suggest a hierarchical Bayesian framework using Markov Chain Monte Carlo methodology. Furthermore, we illustrate the method in an application data. We check the convergence by a potential scale reduction factor and we use the posterior predictive p-value and the mean logarithmic conditional predictive ordinate to compar models.

• 전자공학회논문지A
• /
• 제30A권12호
• /
• pp.117-124
• /
• 1993

In this paper we propose a new thchnology mapping algorithm for multiplexer-based FPGA's The algorithm consists of three phases` First, it converts the logic functions and the basic logic mocule into BDD's. Second. it covers the logic function with the basic logic modules. Lastly, it reduces the number of basic logic modules used to implement the logic function after going through cell merging procedure. The binate selection is employed to determine the order of input variables of the logic function to constructs the balanced BDD with low level. That enables us to constructs the circuit that has small size and delay time. Technology mapping algorithm of previous work used one basic logic module to implement a two-input or three-input function in logic functions. The algorithm proposed here merges almost all pairs of two-input and three-input functions that occupy one basic logic module. and improves the mapping results. We show the effectiveness of the algorithm by comparing the results of our experiments with those of previous systems.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.177-185
• /
• 1999

The airfoil design optimization procedures based on the Navier-Stokes equations were developed, This procedure enables more realistic and practical transonic airfoil designs. The modified Hicks-Henne functions were used to generate the shape of airfoils. Five Hick-Henne functions were used to design upper surface of airfoil only. To enhance the ability of Hick-Henne function to generate various airfoil shape with limited number of functions, the positions of control points were adjusted through optimization procedure. The design procedure was applied to the single-point design for the drag minimization problem with lift and area constraints. The result shows the capability of the procedure to generate much realistic airfoils with very small drag-creep in the low transonic regime. This is mainly due to the viscosity effect of Navier-Stokes flow analysis. However, in the higher transonic range tile drag-creep appears. The multi-point design is shown to be an effective way to avoid the drag-creep and improve off-design performance which is very similar in the Euler design.

• 한국지능시스템학회논문지
• /
• 제5권1호
• /
• pp.15-20
• /
• 1995

삼각 멤버쉽함수는 적용의 간편성으로 인하여 가장 절리 쓰이는 멤버쉽함수이다. 그러므로, 각 삼각형의 밑변의 길이가 퍼지 추론의 결과에 영향을 주는 이유에 대한 해석이 필요하다. 본 논문에서는 일정 비의 규칙성을 갖는 삼각 멤버쉽함수가 결과에 어떠한 영향을 미치는 지에 대하여 기하하적인 접근 방법으로 해석해 보았다.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1082-1089
• /
• 2017

Negative output elementary super lift Luo converter (NOESLLC), which has the significant advantages including high-voltage transfer gain, high efficiency, high power density, and reduced output voltage/inductor current ripples when compared to the traditional DC-DC converters, is an attractive DC-DC converter for the field of negative DC voltage applications. In this study, in consideration of the voltage across the energy transferring capacitor changing abruptly at the beginning of each switching cycle, the improved averaged model of the NOESLLC operating in continuous conduction mode (CCM) is established. The improved DC model and transfer functions of the system are derived and analyzed. The current mode control is applied for this NOESLLC. The results from the theoretical calculations, the PSIM simulations and the circuit experiments show that the improved DC model and transfer functions here are more effective than the existed ones of the NOESLLC to describe its real dynamical behaviors.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.720-730
• /
• 2002

Automated design of large structures requires efficient and accurate optimization algorithms because of a large number of design variables and design constraints. The objective of this study is to examine the characteristics of the Kreisselmeier -Steinhauser envelope function and to investigate va tidily of accumulating constraint functions into a small number of constraint functions or even into a single constraint function. The commercial package DOT is adopted as a local optimizer. The optimum results using the envelope function are compared with those of the conventional method for a number of numerical examples and the differences between them are shown to be negligible.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.627-635
• /
• 2019

In this study, we developed for processing complex features using CAM software that satisfies precision for example practice and related qualification tests suiTable for CNC training purposes. In addition, functions such as location control, speed control, and processing path generation, which are the main functions of CNC machining machines, were constructed using small equipment parts, servo motors, inverters, general purpose PCs, and commercial NC software and researched with the goal of developing low-cost education equipment. In the static accuracy inspection, the degree of machine when measuring the parallelism of the X, Y and Z axes and the vibration of the main shaft did not reach the allowable value. However, we have obtained a finished product that satisfies the CNC machine book sample shape machining, detailed functions of the position control function of the CNC machine tool, linear interpolation function, circular interpolation function, and tool offset function. In the qualification test shape processing, a shape with a degree of 1/100 mm was processed to obtain position accuracy that satisfied the tolerance.