• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.784-786
• /
• 1995

Variable Structure Control(VSC) scheme with sliding mode is widely used to keep a control system insensitive to parameter variations and disturbances. However, the conventional sliding mode control has the undesired phenomenon of chattering which may become a serious problem. Also the restriction of the sliding mode regime cannot guarantee the insensitivity throughout an entire response. In this paper, the sliding surfaces, which are composed of three-line segments, are used to remove the reaching phase. Also, the concept of fuzzy logic is incorporated with the sliding mode control in order to control the unknown or partially known systems effectively. The proposed method is applied to a Double-Sided MM Type LDM to show its usefulness.

• 소음진동
• /
• 제8권2호
• /
• pp.313-323
• /
• 1998

본 논문에서는 전기장 강도에 따라 댐핑력 조율이 가능한 ER댐퍼를 이용하여 유연구조물의 진동제어를 수행하였다. 아라빅 검 ER유체를 자체 조성한 후 전단 모드하에서의 빙햄모델을 실험적으로 도출하고, 이를 근거로 알맞은 크기의 ER댐퍼를 설계제작하였다. ER댐퍼를 장착한 양단고정형 유연구조물시스템을 구성하고, 제어기 설계를 위한 운동지배 방정식과 경계조건을 도출하였다. 시스템변수중 실제시스템에서 쉽게 발생할 수 있는 고유진동수와 감쇠비를 불확실 변수로 고려하여 슬라이딩모드 제어기를 설계하였다. 정현파와 랜덤가진에 대한 제안된 제어시스템의 우수한 진동제어 효과를 컴퓨터 시뮬레이션과 실험을 통하여 입증하였다.

• Tribology and Lubricants
• /
• 제36권1호
• /
• pp.18-26
• /
• 2020

The effects of the carburizing process on the sliding wear behavior of SCM420H steel have been investigated. In particular, the effects of grain boundary corrosion observed in the surface layer after gas carburizing and the effects of hardness of the carburized cases after heat-treatment on the sliding wear properties were examined. Pin specimens carburized by two methods (gas carburizing and vacuum carburizing) were tempered at two temperatures of 180℃ and 400℃ after oil-quenching, respectively. Sliding wear tests were carried out against heattreated SKH51 steel at several sliding speeds using a pin-on-disc type test machine. As results, it can be found that there is no difference in the wear behavior between the pins carburized using two methods. This implies that the grain boundary corrosion that formed in the surface layer after gas carburizing has no effect on the sliding wear behavior of carburized SCM420H steels. Additionally, there is no significant difference in the wear behavior between carburized pins tempered at 400℃ and at 180℃ after oil-quenching, regardless of the carburizing method. This is because carburized pins tempered at 400℃ have a troostite structure, which exhibits higher tribochemical reactivity even though its hardness is lower than that of martensite structure. In this respect, it can be considered that good wear resistance of carburized cases is maintained at least until the effective case depth.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1414-1417
• /
• 2003

In this paper, sliding mode controller for discrete-time nonlinear systems with uncertainties and disturbances are proposed. The concept of time-delay control (TDC) which consists of estimating the uncertain dynamics of the system through past observations of the system response is used. The proposed controller guarantees that the closed-loop system states are globally uniformly ultimately bounded (GUUB). It is also shown that the closed-loop system states are globally uniformly asymptotically stable (GUAS) if uncertainties are constant.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.519-523
• /
• 1993

In this paper, the variable structure model following control scheme is proposed for the nonlinear robot manipulator system. The proposed control system guarantees that the system state is in the sliding mode for all time. Therefore, error transient can be prescribed in advance for all time. Furthermore, overall system is globally exponentially stable. Chattering problem is reduced by the introduction of a boundary layer. Simulation results are given to show the usefulness of the proposed control scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.173.3-173
• /
• 2001

In this paper, attitude control of autonomous system using bike based on variable structure control is discussed. Variable structure control is more than a promising technique in the field of nonlinear control. It permits the realization of very robust and simple regulators, with appealing sliding mode characteristics especially if the considered dynamics requires a very short sampling time. We derive dynamic equation of it and demonstrate that the designed controller stabilizes attitude simultaneously regardless of wheel position by computer simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.155-160
• /
• 1990

This paper presents the new VSMFC (variable structure model following control) algorithm of a system with parameter uncertainty. In contrast to the conventional approach, continuous control inputs am used instead of discontinous ones and modified reachability condition for sliding mode reduces a reaching phase and a newly proposed sliding surfaces are used for the robust control of uncertain system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.227-231
• /
• 2004

In this paper, a robust Sliding Mode Variable Structure (SMVS) controller is designed for Active Queue Management (AQM). This type of controller is insensitive to noise and variance of the parameters, thus it is suitable to time varying network systems. Simulation results conform the robust performance of SMVS controller against the disturbance. At the same time, a complete comparison between SMVS and PI controllers is made. The conclusion is that both transient and steady state performance of SMVS controller is better than that of PI one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.79-82
• /
• 2003

This paper presents a new speed and position sensorless of Switched Reluctance Motor(SRM) based on the sliding mode observer. The sliding mode observer structure and its design method are discussed. Also, Lyapunov functions are chosen for determining the speed and the stator resistance estimator. The effectiveness of the proposed observer system is confirmed by the computer simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1213-1218
• /
• 1993

Variable structure control is applied to the robust output tracking control problem of general nonlinear multi-input multi-output (MIMO) systems. Using the concept of relative degree and minimum phase, input/output(I/O) linearization is undertaken. For I/O the linearized system, a new sliding hyperplanes design method is proposed. In this procedure, we can construct very robust and efficient sliding mode controller for general nonlinear systems of relative degree higher than two. The control results are illustrated by adopting a numerical example.