• Journal of the Korean Wood Science and Technology
• /
• 제43권6호
• /
• pp.810-817
• /
• 2015

본 연구는 백합나무 스킨팀버의 ACQ-2, CUAZ-3, CuHDO-1 가압처리 특성을 평가하기 위해 수행되었다. 일차적으로 백합나무 변재부와 심재부 시험편을 대상으로 처리용 목재 함수율이 방부제 처리도에 미치는 영향을 평가하고, 방부제 유효성분인 구리의 처리목재 내 정착 특성을 조사하였다. 본 연구 결과에 의하면 백합나무 변재부는 방부제 종류에 관계없이 조사된 목재함수율 범위(50% 이하)에서 사용환경 범주 H3용 처리목재의 침윤도와 흡수량 기준을 모두 만족하였다. 백합나무 변재부의 방부제 보유량 경사를 조사한 결과, 국립산림과학원 고시 제2011-04호에 제시된 처리용 목재의 함수율(평균 30% 이하)을 만족할 경우 재면으로부터 15 mm 깊이까지에서 사용환경 범주 H3용 처리재의 흡수량 기준을 충족하였다. 백합나무 심재부는 처리도가 매우 불량하여 처리용 목재의 함수율 조건 및 방부제 종류에 관계없이 사용환경 범주 H3용 처리목재의 침윤도와 보유량 기준을 모두 만족시키지 못하였다. 백합나무 변재 및 심재 시험편 공히 비건조 양생보다 건조 양생에서 구리의 정착속도가 빠르고 또한 최종 구리 정착율이 높았으며, 3주간 비건조 양생 후 구리 정착율이 90% 수준에 머물었으며 양생기간을 연장하더라도 정착율은 크게 개선되지 않았다.

• International Journal of Advanced Culture Technology
• /
• 제8권1호
• /
• pp.236-242
• /
• 2020

In this paper, we present the improvement in low moisturizing ability and stability that existing skin softeners have due to the low oil content, by developing skin softener using nanoemulsion of phospholipid liposome, based on the properties of nanoemulsion in cosmetic formulation. In this study, two types of oil; dimethicone (DC 200/6cs) or medium chain triglyceride (MCT), and two kinds of lecithin; unsaturated or saturated were respectively applied to produce nanoemulsion. In the particle size analysis of nanoemulsion, the droplet size of nanoemulsion containing DC200/6cs and unsaturated lecithin was the smallest, and all nanoemulsion showed high stability in the measurement of zeta potential. Therefore, with the smallest particle size and high stability, moisture contents and trans epidermal water loss(TEWL) were measured using the skin softener of DC200/6cs and unsaturated lecithin contained nanoemulsion, and the measurement was compared with the non-oil skin softener and the skin softener with only small amount of oil. The results showed that the moisture content of the skin softener using nanoemulsion increased greatly than other two skin softeners, showing high hydration ability and water retention capacity, and TEWL decreased greatly, therefore preventing the evaporation of moisture from the skin. As a result, the oil content and stability of the skin softener was improved by utilizing nanoemulson based of phospholipid liposome, and it is expected to be used in various ways in cosmetic industry.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.200-211
• /
• 2019

본 연구는 피부미용 계약학과 학생의 직무 만족 및 이직 의도에 대한 요인을 분석하고 장기근속을 유도할 방안을 제시하는 데 그 목적이 있다. 이를 위해 피부미용 계약학과 학생 260명에 대한 설문조사 자료를 토대로 SPSS 통계 프로그램을 이용하여 빈도 분석과 다중 회귀분석을 실시하였다. 주요 결과는 다음과 같다. 첫째, 계약학과 학생들은 인턴십 기간 충분한 실무훈련을 통해 업무에 대한 자신감을 느끼고 본인의 포지션에서 직무수행의 권한위임을 받음으로써 직무만족도가 높았다. 둘째, 계약학과 학생들에게 직무 향상을 위한 정기적인 기술교육은 직무수행에 대한 자신감과 직업에 대한 확신을 주었고 이는 장기근속을 유도했다. 셋째, 계약학과 학생들에게 계약기간 업무능력에 따라 공정하게 성과급, 포상, 승진 기회 등 보상 제도를 적용해 업무능력 향상의 동기부여를 줌으로써 이직 의도를 줄였다. 이에 본 연구는 피부미용 계약학과 학생들에게 직무수행의 권한 위임, 직무수행에 대한 확신, 그리고 능력에 따른 보상 제도를 적용함으로써 직무 만족 및 이직률 감소와 장기근속까지 끌어낼 수 있음을 시사한다.

• 동아시아식생활학회지
• /
• 제25권1호
• /
• pp.64-72
• /
• 2015

Menstrual problem (premenstrual syndrome (PMS) and dysmenorrhea) is a common gynecological complaints among women in reproductive age. The aim of this study was to compare the effects of isoflavone and Cynanchum wilfordii for improvement of premenstrual syndrome, dysmenorrhea. Subjects were 30 college women in Busan, divided into three groups (CG; control group, n=10; IS group; isoflavone supplement group, n=10; CS group; Cynanchum wilfordii supplement group, n=10). They showed 5.0 or higher for menstrual pain when tested by the VAS. IS group was allocated a isoflavone pill (500 mg/day) for 8 weeks, and CS group was allocated a Cynanchum wilfordii pill (6 g/day) for 8 weeks. We administered a menstrual distress questionnaire (MDQ), and visual analogue scale(VAS). There were no differences among the three groups in general characteristics, nutrients intake, MDQ, or VAS. In the CG group, there were no differences in MDQ, or VAS after 8 weeks. In the IS group, negative emotions, behavioral changes, concentration, pain, autonomic nervous system response, water retention, and skin changes significantly improved (P<0.05). In the CS group, negative emotions, pain, autonomic nervous system response, and water retention significantly decreased after 8 weeks (P<0.05). Changes in negative emotion, pain, autonomic nervous system response, water retention, skin changes significantly improved in the CS group compared to the control group (P<0.05). VAS significantly decreased in the IS and CS groups (P<0.05). The decrease in VAS differed among three groups, with the CS group showing a larger decrease than the control group and IS group (P<0.001).

• 한국약용작물학회지
• /
• 제27권2호
• /
• pp.143-150
• /
• 2019

Background: Skin is an organ that protects the human body from various environmental stimuli that can induce immune system activation. Skin aging can be largely divided into two categories: physiological aging, which is caused by the a decreased physiological function of the skin and structural changes with aging, and photoaging, which is caused by the chemical stress induced by external stimuli such as ultraviolet (UV) radiation. Methods and Results: The objective of this study was to investigate the anti-wrinkle and UV protective effect of catechin-rich green tea extract (CGTE) in activated keratinocyte (HaCaT cells) and UV-induced skin damage in hairless mice. The results showed that CGTE inhibits the tumor necrosis factor-alpha interferon-gamma ($TNF-{\alpha}+IFN-{\gamma}$)-induced expression of matrix metalloproteinase (MMP)-1 in HaCaT cells. In addition, the CGTE treatment significantly reduced wrinkle formation, epidermal thickness, collagen deposition, and transepidermal water loss in dorsal skin irradiated with UVB. However, the ${\beta}$-glucosidase activity was significantly increased. The CGTE treatment inhibits mRNA expression and enzyme activity of MMP-2 and MMP-9 in the dorsal skin irradiated with UVB. Conclusions: It is expected that CGTE can be effectively used as a functional food and cosmetic ingredient to improve skin moisture retention and reduce wrinkle formation.

• 한국응용과학기술학회지
• /
• 제38권3호
• /
• pp.662-668
• /
• 2021

본 연구에서는 피부 미백 개선 기능성 화장품 소재이자 친수성 소재인 ascorbyl glucoside(AG)의 피부 투과율을 개선시키기 위해 고형지질나노입자(SLN)을 설계하였다. AG는 이중 에멀젼 가온 용융유화법으로 SLN 내에 봉입하였다. 제조 된 AG 봉입 SLN의 입자크기, 다분산 지수, 제타전위, 봉입율등의 입자의 물리화학적 특성을 평가하였다. 피부 투과시험의 경우 인체 유래 인조 피부 조직 모델 중 SkinEthic RHE를 사용하였다. 제조 된 AG 봉입 SLN의 평균 입자크기는 172.65 - 347.19 nm 이었고, 평균 제타전위는 -22.90 - -41.20 mV이었다. SLN 내 AG의 평균 봉입효율은 44.18 - 57.77%이었고, 평균 봉입율은 12.83 - 16.15%이었다. AG 봉입 SLN의 피부 투과 결과는 SLN을 적용하였을 때가 적용하지 않을 때 보다 약 3.7 - 7.4 배 피부 투과율이 개선되었다. 따라서, 본 연구에서 제조 된 SLN은 AG의 국소약물전달시스템으로 사용하는데 유용할 것이다.

• 대한수의학회지
• /
• 제35권3호
• /
• pp.553-562
• /
• 1995

To elucidate pathologic change of skin in porcine exudative epidermitis, immunohistochemical and electron microscopical observations were carried out in the skin of the suckling pigs inoculated with Staphylococcus hyicus subsp hyicus which were isolated from natural case. In immunohistochemistry, ATPase-positive dendritic cells were more populated in epidermo-dermal junctional areas and perivascular area in dermis than in epidermal area as the disease was proceeded. These dendritic cells were identified as Langerhans cell by immunoperoxidase staining and these cells were populated granulomatous bodies. Electron microscopical study showed various retrogressive degeneration and vacuolation of epidermal cell organelles with retention of amorphorous exudates in intercellular space, and cellular seperation. Langerhans cells present in intercellular space of epidermis were populated in epidermo-dermal junctional areas, in dermis, and around granulomatous bodies. Langerhans cells contained decreased Birbeck granules in number but increased lysosome and ribosome. These cells were in contact with lymphocytes. This study was discussed relation between the various immunocytes and the formation of granulomatous bodies, and this inflammation was considered as delayed type hypersensitivity.

• 대한한의학회지
• /
• 제37권3호
• /
• pp.27-38
• /
• 2016

Objectives: According to Korean Medicine theory, the skin color of LU10 serves as a diagnostic clue to dyspeptic symptoms. The aims of this study were (1) to find the difference of skin color in LU10 region between functional dyspepsia (FD) and healthy control (HC) and (2) to examine the relationship between LU10 skin color parameters and dyspeptic symptoms. Methods: 39 participants (29 FD and 10 HC) have participated in this study. They were asked to complete gastrointestinal scale (GIS), gastrointestinal symptom rating scale (GSRS), Nepean dyspepsia index (NDI), functional dyspepsia-related quality of life (FD-QoL), visual analogue scale (VAS) for dyspeptic symptoms, food retention questionnaire (FRQ) and cold heat questionnaire (CHQ). $L^*$ (luminance), $a^*$ (red-green balance) and $b^*$ (yellow-blue balance) values of LU10 region were calculated through digital images of the participant's hand. Then we evaluated test-retest reliability of $L^*$, $a^*$ and $b^*$ values of LU10 region. Additionally, we compared $L^*$, $a^*$ and $b^*$ values of LU10 between FD and HC, and examined the relationship between LU10 color parameters and seven questionnaires scores. Results: Only $L^*$ values in LU10 region were significantly higher in FD compared with HC. GIS scores and the subset scores of NDI had a positive correlation with $L^*$ values significantly. Correlation coefficients of test-retest reliability of skin color measurement of LU10 ranged from 0.871 to 0.936 representing very strongly statistically significant (P<0.001). Conclusions: We confirmed the difference of skin color in LU10 region between FD and HC, and relationship between LU10 skin color parameters and dyspeptic symptoms.

• KSBB Journal
• /
• 제25권3호
• /
• pp.297-302
• /
• 2010

Ketoprofen is one of the propionic acid class of nonsteroidal anti-inflammatory drug with analgesic and antipyretic effects. The most common side effects from ketoprofen after oral administration are gastrointestinal irritation, diarrhea, abdominal pain and retention of fluid. Ketoprofen was formulated as water-soluble gels to reduce these side effects. To increase the skin permeability of ketoprofen, microsphere containing ketoprofen was prepared with chitosan and ploy-$\varepsilon$-caprolactone. And then prepared microsphere was manufactured as an adhesive hydrogel with polyvinylpyrrolidone K-25, polyethylene glycol 4000, and various permeation enhancers. The flux and permeability of ketoprofen were evaluated. As the concentration of tween 80 and enhancers increased, the flux of ketroprofen was accelerated. Also the permeation rate was facilitated by enhancers, but did not affect the lag time. From these results, the adhesive hydrogel using microsphere could be a good delivery system for ketoprofen to improve the skin permeation.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.123-132
• /
• 2000

The field of maxillofacial prosthetics is concerned with the prosthetic reconstruction of missing head and neck tissue. Currently, facial prostheses are usually applied in cases of defects caused by the surgical removal of tumors or congenital defects. While silicone has been most widely used for the reconstruction of missing maxillofacial defects, it does not have ideal physical properties. Therefore, bonding a thin polyurethane sheet to silicone prostheses was recommended. In this case skin adhesives were used for the retention of maxillofacial prostheses. But retention of devices has always been problematic. The contributions of implants can be made to solve these problems. Implants have reduced the need for adhesive use, simplifying cleaning procedures and thus extending the life of the prostheses. For implant-retained prostheses, retentive matrix is necessary to hold attachments and/or magnets. The retentive matrix is usually fabricated with autopolymerizing acrylic resin or visible light- polymerized resin. The purpose of this study was to compare the adhesion-in-peel force of silicone adhesive to autopolymerizing acrylic resin and polyurethane sheet with two different surface textures : pumice polish only or retention groove, and three surface primers : Dow corning 1205 primer or Dow corning S-2260 primer or FactorII A-304 primer, and two polymerization methods : room temperature or dry heat oven. The t-peel bond strength of specimens was determined as described in ASTM Standard D1876-72. The results were statistically analyzed using the ANOVA test, multiple range test and t-test The results were as follows. 1. The t-peel bond strength of A-304 primer was the highest and statistically higher than that of S-2260(p<0.05). 2. The t-peel bond strength of specimens with retention groove was statistically higher than that of specimens polished with pumice(p<0.05). 3. The t-peel bond strength of specimens polymerized in dry heat oven was statistically higher than that of specimens in room temperature(p<0.01).