• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권1호
• /
• pp.45-48
• /
• 2010

An inter-pin skew compensation scheme is proposed, which minimizes the inter-pin skew of parallel interface induced by unequal trace length and loading of printed circuit board (PCB). The proposed scheme measures the inter-pin skew and compensates during power-up with simple hardware. The proposed scheme is applied to 3.2-Gb/s/pin DDR4 SDRAM and implemented in a 0.18 m CMOS process. The inter-pin skew is compensated in 324-cycles of 400-MHz clock and the skew is compensated to be less than 24-ps.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.224-232
• /
• 2000

Four turbulent $k-{\varepsilon}$ models (i.e., standard model, modified models with streamline curvature modification and/or preferential dissipation modification) are applied in order to analyze the turbulent flow of wall-attaching offset jet. For numerical convergence, this paper develops a method of slowly increasing the convective effect induced by skew-velocity in skew-upwind scheme (hereafter called Partial Skewupwind Scheme). Even though the method was simple, it was efficient in view of convergent speed, computer memory storage, programming, etc. The numerical results of all models show good prediction in first order calculations (i.e., reattachment length, mean velocity, pressure), while they show some deviations in ·second order (i.e., kinetic energy and its dissipation rate). Like the previous results obtained by upwind scheme, the streamline curvature modification results in better prediction, while the preferential dissipation modification does not.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.326-328
• /
• 2000

The paper proposes the scheme of skew detection for Thai printed document images by using linear regression algorithm. It intends to use with the Thai character recognition systems to reduce the skew detection time. This scheme begins by finding the center of gravity of a document image. This point is used as the starting point for gathering data in the scheme. The data is obtained by scanning incrementally one pixel in vertically with the width of 20-pixels. After the scanning process, if data Is different from it's neighbor more than ${\pm}$ 15 pixels, it will be considered as noise or data in other lines and will be deleted. The last step is the operation by using linear regression algorithm on these selected data and the skew angle will be obtained. The proposed method has been tested with 45 document images with different fonts, sizes and skew angles. The experiment results show that the proposed method can detect the skew angle with the error of less then one degree. The average processing time is about 19 times faster than that of the Hough Transform method.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.23-32
• /
• 1991

The paper discusses the problem of the flow over the backward facing step and the offset jet, which are calculated numerically. Standard k- .epsilon. model and its LPS modification are used as turbulence models. Hybrid central/upwind scheme and skew- upwind scheme are used as numerical schemes. The numerical scheme has a strong influence on the offset jet rather than the flow over backward facing step. The skew-upwind scheme gives good results in both cases. However, the k- .epsilon. model with LPS modification yields no remarkable improvements in the predictions of both flows. The skew-upwind scheme improves the prediction of reattachment length in the offset jet.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.865-875
• /
• 1988

본 연구에서는 부정숙 등에 의한 실험결과를 토대로 하여, 단이 진 2차원 벽 면분류에 대한 수치해석으로 표준 K-.epsilon.모델과 LRM 그리고 PAM을 적용하고, upwind 및 skew-upwind scheme을 적용하여 그 결과를 검토하고자 한다.

• 대한전자공학회논문지SD
• /
• 제41권4호
• /
• pp.1-8
• /
• 2004

고속 저전력 디지털 시스템을 위해 클록 스큐를 최소화하고 동적 파워 소모를 줄이는 새로운 클록 분배 방법을 제안하였다. 제안된 방법은 접힌 라인구조(FCL)과 위상 섞임 회로(phase blending circuit)을 이용하여 Zero-skew 특성을 갖는다. FCL에 적합한 라인 구조를 분석하기 위해, 마이크로 스트립과 코플라너 라인을 FCL형 클록 라인으로 분배되었다. 시뮬레이션 결과는 l0㎜ 떨어져 있는 두 리시버 사이의 최대 클록 스큐가 1㎓에서 10psec보다 적고 20㎜ 떨어져 있는 두 리시버 사이의 최대 클록 스큐는 1㎓에서 60 psec보다 작음을 보였다. 또한, 공정, 전압, 온도 변화에 무관하게 클록 신호들의 스큐가 변하지 않음을 알 수 있었다.

• ETRI Journal
• /
• 제32권6호
• /
• pp.854-862
• /
• 2010

One-way delay variation (OWDV) has become increasingly of interest to researchers as a way to evaluate network state and service quality, especially for real-time and streaming services such as voice-over-Internet-protocol (VoIP) and video. Many schemes for OWDV measurement require clock synchronization through the global-positioning system (GPS) or network time protocol. In clock-synchronized approaches, the accuracy of OWDV measurement depends on the accuracy of the clock synchronization. GPS provides highly accurate clock synchronization. However, the deployment of GPS on legacy network equipment might be slow and costly. This paper proposes a method for measuring OWDV that dispenses with clock synchronization. The clock synchronization problem is mainly caused by clock skew. The proposed approach is based on the measurement of inter-packet delay and accumulated OWDV. This paper shows the performance of the proposed scheme via simulations and through experiments in a VoIP network. The presented simulation and measurement results indicate that clock skew can be efficiently measured and removed and that OWDV can be measured without requiring clock synchronization.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.579-584
• /
• 2000

Algebraic Reynolds Stress (ARS) model is applied in order to analyze the turbulent flow of wall-attaching offset jet and to evaluate the model's predictability. The applied numerical schemes are upwind scheme and skew-upwind scheme. The numerical results show good prediction in first order calculations (i.e., reattachment length, mean velocity, pressure), while they show slight deviations in second order (i.e., kinetic energy and turbulence intensity). By comparison with the previous results using $k-{\varepsilon}$ model, ARS model predicts better than the standard $k-{\varepsilon}$ model, however, predicts slightly worse than the $k-{\varepsilon}$ model including the streamline curvature modification. Additionally this study can reconfirm that skew-upwind scheme has approximately 25% improved predictability than upwind scheme.

• 대한기계학회논문집B
• /
• 제24권12호
• /
• pp.1615-1624
• /
• 2000

Algebraic Reynolds Stree (ARS) model is applied in order to analyze the turbulent flow of wall-attaching offset jet and to evaluate the predictability of model. The applied numerical schemes are the upwind scheme and the skew-upwind scheme. The numerical results show a good prediction in the first order calculations(i.e., reattachment length, mean velocity, pressure), however, slight deviations in the second order(i.e., kinetic energy and turbulence intensity). Comparing with the previous results using the k-$\varepsilon$ model, the ARS model predicts better than the standard k-$\varepsilon$ model, however, slightly worse than the k-$\varepsilon$ model including the streamline curvature modification. Additionallay this study can reconfirm that the skew-upwind scheme has approximately 25% improved predictability than the upwind scheme.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1999년도 가을 학술발표논문집 Vol.26 No.2 (3)
• /
• pp.423-426
• /
• 1999

In offering a statistical end-to-end bandwidth guarantee service, typically called Assured Service, in Differentiated Serviced (Diff-Serv) framework, the biggest issue is its inconsistency. Larger profile TCP flows fail to achieve the guaranteed rate when competing with many smaller profile flows. This phenomenon, which we call "bandwidth skew", stems from the fact that larger profile flows take longer time to recover from the congestion window size backoff after a packet drop. Proposed solutions to this problem, therefore, are focused on modifying the TCP behavior. However, TCP modification is not practicable, mainly due to its large installation base. We look to other mechanisms in the Diff-Serv framework to find more realistic solutions. In particular, we demonstrate that RIO, the de facto standard packet differentiation mechanism used for Assured Service, also contributes to the bandwidth skew. Based on this new finding, we design a modified RIO mechanism called RI+O. RI+O uses OUT queue length in addition to IN and IN+OUT queue length to calculate OUT packet drop probability. We show through extensive simulation that RI+O significantly alleviates the bandwidth skew, expanding the operating regime for Assured Service.d Service.