• Safety and Health at Work
• /
• v.10 no.3
• /
• pp.370-376
• /
• 2019

Background: Respirator fit testing is a method to assess if the respirator provides an adequate face seal for the worker. Methods: Workers from four Norwegian smelters were invited to participate in the study, and 701 respirator fit tests were performed on 127 workers. Fourteen respirator models were included: one FFABE1P3 and 11 FFP3 respirator models produced in one size and two silicone half masks with P3 filters available in three sizes. The workers performed a quantitative fit test according to Health and Safety Executive 282/28 with 5-6 different respirator models, and they rated the respirators based on comfort. Predictors of overall fit factors were explored. Results: The pass rate for all fit tests was 62%, 56% for women, and 63% for men. The silicone respirators had the highest percentage of passed tests (92-100%). The pass rate for the FFP3 models varied from 19-89%, whereas the FFABE1P3 respirator had a pass rate of 36%. Five workers did not pass with any respirators, and 14 passed with all the respirators tested. Only 63% passed the test with the respirator they normally used. The mean comfort score on the scale from 1 to 5 was 3.2. The respirator model was the strongest predictor of the overall fit factor. The other predictors (age, sex, and comfort score) did not improve the fit of the model. Conclusion: There were large differences in how well the different respirator models fitted the Norwegian smelter workers. The results can be useful when choosing which respirators to include in respirator fit testing programs in similar populations.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.10
• /
• pp.1632-1646
• /
• 2010

This article is an analysis of the fit preference of the knitted jacket according to body types for 30's and 40's adult women through a comparison of real and virtual fit. A five point likert scale was used to evaluate the degree of the preference of real and virtual fit. The data were analyzed with t-test and ANOVA using statistical program SPSS 17.0. The results are as follow. 1. The real and virtual fit preference of the knitted jacket according to body types indicates that respondents preferred pattern 2 for body type N than the rest of the patterns; however, respondents preferred pattern 3 for body type A and H. 2. There were no significant differences between real and virtual fit preference. 3. It is necessary that the knitted jacket follow a similar size tolerance like a woven jacket. The results show that the next generation of virtual try-on systems need the development of a minus clothing ease scale.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.889-894
• /
• 2010

Conventional shrink-fit tool holders have positive features, such as high accuracy, high strength, high stiffness and low sensitivity to centrifugal forces, but they require heavy investments for heating and cooling equipment. Generally the heating equipment has to heat the tool holder up to $200{\sim}300^{\circ}C$ for tool changes. This paper introduces a novel shrink-fit tool holder that is able to unclamp a tool at $40{\sim}50^{\circ}C$. This feature makes it possible to switch between the clamped and unclamped states by using a simple device, which has lower power, smaller size and lower cost than the heating equipment of the conventional shrink-fit tool holders. The proposed shrink-fit tool holder is able to expand its tool hole by using the shape memory alloys which are integrated in the tool holder body. Performances of the SMA shrink-fit tool holder were evaluated experimentally. The experimental results confirm that the proposed tool holder is feasible in aspects of clamping/unclamping operations, clamping force and repeatability of tool setup.

• The Research Journal of the Costume Culture
• /
• v.20 no.2
• /
• pp.184-194
• /
• 2012

The purpose of this study is twofold: it suggests appropriate sizes in menswear slim-fit jackets according to brand zones and number of buttons, as well as jacket patternmaking methods according to jacket styles by surveying and comparing the overall present status of patternmaking and production for both men's slim-fit and classic-fit jackets. The researcher conducted interviews with patternmakers of sixteen brands with prepared questionnaires. Data were analyzed by descriptive statistics using SPSS 12.0. The results of this study are as follows: first, for the production ratios of jacket style, the jacket styles' respective proportions differ distinctly according to brand zone. Second, for a jacket with the same number of buttons according to brand zone, the size in character-casual brand zone (character casual can be defined as high quality brands producing designer style clothes) is slightly bigger than the men's formal suit. As the number of buttons increases, there are increases in the chest, waist and hip circumference; on the other hand, the front neck width and the distance from the shoulder neck point to the bottom of the lapel both decrease. Furthermore, the amount of wearing ease in the chest, waist, upper arm circumference, and sleeve curve is less in slim-fit jacket styles than in classic-fit jacket styles. Fusible interfacing alone is used in slim-fit jackets, while sew-in interfacing is used in combination with fusible interfacing in classic-fit jackets. This research concludes that when slim-fit men's jackets are manufactured, appropriate patternmaking and manufacturing methods should be considered.

• The Research Journal of the Costume Culture
• /
• v.19 no.1
• /
• pp.191-199
• /
• 2011

The purpose of this study was designed to investigate the purchasing considerations given and wearing fit according to suit styles in male consumers in their 30s by conducting questionnarie research with 410 persons. The research intended to give menswear manufacturers the scientific data to improve consumers' satisfaction when menswear brands produce jackets. The summary and conclusions in this study are as follows: First, male consumers have moderate interest in fashion and recognize the impact of fashion on their professional lives. Also, male consumers were aware that recent menswear fashion trends are being changed to slim-fit. Second, by examining the suit inventory and the purchasing consideration according to the suit styles, male consumers in their 30s had between 2 to 4 suits, both in slim-fit and classic-fit, respectively. When consumers purchase a suit, the most important consideration factors are size and wearing fit in both slim-fit and classic-fit. The reason to purchase a slim fit suit is that it seems slim due to its fitted silhouettes, while in a classic-fit suit, it is required because of job nature. Third, the result indicates the circumferences causing the most uncomfortable were the shoulder, chest, the back, and upper arm. Also, they mentioned the chest and the abdominal section including the shoulder as the most uncomfortable circumference to the question on what to be improved in jacket. Therefore, the research suggests that the menswear manufacturer should consider different consumers' desires which require different criteria based on the suit styles.

• Communications for Statistical Applications and Methods
• /
• v.9 no.3
• /
• pp.877-887
• /
• 2002

In this paper, behaviors and properties of p-values for goodness-of-fit test are investigated. With some findings on the p-values, we consider some applications to determine sample size of a survey research using the regression equation based on a pilot study data. Regression equations are obtained by the well-known least squared method, and we find that regression lines could be formulated with only two data points, alternatively. For further studies, this works might be extended to t distributions for testing hypotheses about population mean in order to determine sample size of a prospective study. Also similar arguments could be explored for F test statistics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.10
• /
• pp.1175-1187
• /
• 2011

This study investigates the wearing conditions and satisfaction level of middle school boys' uniforms. The subjects for the survey were 626 male students from 9 middle schools in Seoul. Data were analyzed using the SPSS 14.0 program. The results of this study are as follows; 1) When purchasing school uniforms, students considered the comfort and the fit important. Student considered importantly the shoulder width of jacket, the shirt length and the sleeve length of shirt, and the pant length and the pant width of pants. 2) Most of students purchased one size bigger school uniforms because they need to wear school uniforms for three years. About 80% of students had difficulties in understanding the meaning of size label, and this made it difficult to select the right size of school uniforms even if they knew their body size exactly. 3) About 10% of students repurchased school uniforms because their school uniforms did not fit any more. The periods of repurchase were the 1st grade 2nd semester and the 2nd grade 1st semester. 4) The waist circumference of pants and the pant width were evaluated larger and the pant length was evaluated to be longer (36.6% of students evaluated that the pant length was longer). Compared to 2nd grade and 3rd grade, the freshman felt that school uniforms were bigger. 5) 44.9% of students had the experience of repairing their school uniforms. The most frequent reason for repair was that the size of school uniforms did not fit well. 202 students repaired the pant length and 86.1% of them reduced their pant length.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.6
• /
• pp.99-105
• /
• 2022

This paper deals with the problem of appropriately allocating multiple processors arriving at the ready queue to the block in the user space of the main memory is divided into blocks of variable size at compilation time. The existing allocation methods, first fit(FF), best fit(BF), worst fit(WF), and next fit(NF) methods, had the disadvantage of waiting for a specific processor because they failed to allocate all processors arriving at the ready queue. The proposed algorithm in this paper is a simple block packing algorithm that allocates as many processors as possible to the largest block by sorting the size of the partitioned blocks(holes) and the size of the processor in the ready queue in descending order. The application of the proposed algorithm to nine benchmarking experimental data showed the performance of allocating all processors while having minimal internal fragment(IF) for all eight data except one data in which the weiting processor occurs due to partition errors.

• The Korean Journal of Community Living Science
• /
• v.25 no.3
• /
• pp.373-382
• /
• 2014

This study was explored the relationship of fit-related factors and, clothing evaluation criteria to clothing satisfaction. A total of 247 completed responses were obtained from a convenient sample of female students in their twenties. The statistical analysis methods included factor analysis, an ANOVA, and a multiple regression analysis. First, clothing evaluation criteria included practicality, product trait, and symbolism. Second, a comparison of clothing evaluation criteria and clothing satisfaction in groups divided by fit-related factors showed significant differences. In particular, the fat body type group showed higher level of the product trait and the thin body type group showed lower level of clothing satisfaction. The high activity group showed higher levels of clothing evaluation criteria and lower level of clothing satisfaction. Third, body type perception (-) and activity importance (-), fit-related factors, and practicality (+), clothing evaluation criterion had significant effects on clothing satisfaction. Therefore, These results suggest that fashion firms should make efficient use of fit-related factors and clothing evaluation criteria to enhance consumers' clothing satisfaction and to stimulate their purchase intention toward fashion goods.

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.30-36
• /
• 2001

This review begins with a brief expression of aerosol capture mechanism of fibrous filter(s) and performance of particulate removing respirators. The more complicated and detailed discussion is not included in this articles. Filtration efficiency and pressure drop are introduced as quality factor ( $q_{F}$) and the way in which filtration efficiency varies with particle size is discussed. Quality factors fro filters recently certified in USA were found to be very higher than those of filters made in Korea, China and USA filters certified with old certified standards. Electrically charged filters are widely used because they have high filtration efficiency and low pressure drop, but their efficiency decreases sharply at the condition occurring wet and oil mist. A discussion is given of respirator leakage through face seal and filter media with fit testing and total inward leakage testing. Since fit factor (FF) refers to the reciprocal of the fraction of the total air entering a respirator through face seal leakage , the degree of fitting performance for respirators is expected with FF. Because respirators made in Korea had generally lower FFs than respirators made in USA, it is necessary to develope respirators that fit properly for Koreans or establish regulations for fit testing.g.