• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.11
• /
• pp.1346-1361
• /
• 2011

This study examined the body characteristics, perceived body size and body-cathexis according to the stature of women aged 18 to 59. Special focus was on women of short stature; in addition, the study searched for the proper clothing fit and satisfaction level for short women. The 2010 SizeKorea data of 2,586 women aged 18 to 59 was analyzed statistically to find the distribution of stature according to 4 age groups along with the body characteristics and proportion of 3 stature groups in each age group. A questionnaire was conducted with responses from 412 women aged 18 to 59, and the perceived body size and satisfaction with body size of 3 stature groups were studied with 5 Likert scales. Although the stature of Korean women has increased, short stature women (those under 155cm) still represent a high percentage of individuals in Korea. Short women (small in height and length) had unique body characteristics in width, depth, and girth that were distinguished from the characteristics of medium or tall women. Especially, the lower body part of short women had distinct characteristics. Accordingly, it is undesirable to reflect the same ease or same body proportion in clothing construction for the 3 stature groups. Short women perceived their stature and length of upper or lower body as too short and the satisfaction with their body size was lower than medium or tall women. To upgrade the clothing fit and satisfaction of short women, it is necessary to reflect the unique body characteristics of short women in clothing design and construction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.289-300
• /
• 2000

Stretchable textile materials are getting more widely used in clothing industry. Among others are two obvious reasons which make it so desirable to young female customers, i.e., better confort with motion and more closely fitted silhouette. But these two points cannot get along well always. If a manufacturer try hard to make his products too closely fit, then the products are even less comfortable than made of non-stretchable material. On the other hand, if a stretchable garment are developed to be too comfortable with plenty of size tolerance. it cannot attract customers who are looking for something closely fit. So the study was aimed to investigate appropriate size tolerances.

• Journal of the Ergonomics Society of Korea
• /
• v.11 no.1
• /
• pp.49-65
• /
• 1992

The study has been carried out in four ways to find out the fit of the present size speces of the garments for middle aged woman. For this purpose, surveys, classifying the trunk form of middle aged woman by factor analysis and clustering, calculating coverage rate of one garment item(suit) has been used. The results are as follows: (1) In case of the survey for middle aged women, the problems concerning the length of sleeves or trousers and hip girth are found. The former too long and the latter too tight. (2) The size classification and the standard deviation for each sizes are very diffenent between 9 ready-made-garment makers. (3) In classifying the trunk forms of the middle aged women, the diversity of the trunk forms are examined. (4) In calculating coverage rates of the 5 maker's size spece, those similar to KS sizing system are the highest. The coverage rate of the smallest size is the higest, while that of the biggest is 0%.

• Journal of Fashion Business
• /
• v.19 no.3
• /
• pp.101-112
• /
• 2015

Because young men's slacks are becoming more slim-fitting today, this study attempts to identify room for improvement by comparing and analyzing the patterns of men's slacks in the literature and those of manufacturers. Selected for the study are two patterns from the literature and one from manufacturers (Slacks A, B, C); those from studies are slim silhouette pants with no tucking around the waist at the front. Subjects for the Fit tests and the pattern designs were men in their twenties with average body shapes in accordance with the figures in Size Korea 2010. Pants were made from muslin fabric and the Fit tests were carried out with three subjects and a panel of five experts to evaluate comfort and appearance. The analysis of the patterns revealed that Slacks A were the longest followed by C and then B. Slacks C had the most girth ease, and Slacks B were the slimmest in both length and girth. Movement tests showed Slacks A to be the most comfortable followed by B and then C. The appearance test found that Slacks B were the most attractive, followed by A, and then C. The fits at the front, back and sides of all three pants were more or less the same. We suggest that more studies be done on pants patterns adjusting them for proper ease and using elastic fabric in order to maintain the slim fit and also to be comfortable to wear.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.1
• /
• pp.26-36
• /
• 2011

The study analyzes the development of slim-fit formal pants patterns for middle-aged men. This study suggests a new pattern that complements the problems of the existing fit on the basis of the standard nude size for middle-aged men with lower garments through the analyses of one-tuck pants patterns from 5 popular brands. As a result, the waistline is lowered by 0.8cm out of consideration for the waist circumference. The crotch extension is reduced by 1.5cm, the back crotch length is revised, the center back waist point is raised by 0.9cm, and the hip line is straightened. The slim-fit is perfected of the new lines from the thigh to knee-line.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.87-92
• /
• 2010

The mask-face interface design should consider the face shape to improve the half mask respirator's fit ratio. This study tried to design the mask-face interface using recent Korean face data. By using the data of 1536 men's 3D face scanning (Size Korea data), head clay mock-up was made and mask-face interface line was extracted from this head mock-up. Using this interface line, the half-mask prototype was made. According to the quantitative fitting test, the proposed mask was found to be well fitted (average fit-ratio > 100). The proposed method had two advantages. 1) The method could use massive head-related anthropometric data like Size Korea data. 2) The qualitative fit test (observation) could be conducted very quickly by fitting the prototype to the head mock-up. However, this method also had several limitations. 1) The head clay mock-up could be different according to the mock-up maker. 2) The average values of the head-related anthropometric data were used to make the head mock-up. Small and large size head mock-ups should be made and tested.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.2 s.38
• /
• pp.189-198
• /
• 1991

The object of this study is to perceive the discomforts of the brassiere consumers according to their age groups & weight groups. The study procedures consisted of a status quo study, a rating on fit and performance according to brassiere types. 1. The result of the status quo study are as follows. (1) The study showed that with getting age bust circumference and bust size become larger with a bigger tendency to droop. Thus older age, bigger bust circumference and size require a technically improved version of brassieres. (2) Slightly tight fit brassieres were favored over more ample ones. The hobbling areas were center front, under armpits, and shoulder strapareas in that order. 2. The results of fit rating on different brassiere types are as follows. (1) The areas affected by brassiere performance were length from side neck point to bust point (bust length), width between bust points and bust height. (2) Compared among brassiere types, the wire type proved most effective. The bigger cup size group had higher satisfactory rate and low discomfort on wearing.

• Asia-Pacific Journal of Business
• /
• v.10 no.4
• /
• pp.87-118
• /
• 2019

The purpose of this study is to examine the effects of person-job fit, which consists of educational fit and skill fit, on employees' intrinsic job satisfaction. To the end, the 10-year balanced panel data of the Korean Labor and Income Panel Study(KLIPS) by the Korea Labor Institute (KLI) for 2008-2017 are utilized. This study analyzes 12,730 observations by 1,273 employees by using fixed effect model, random effect model, and pooled OLS estimation method. The empirical results are as follows: First, it is founded that educational fit and skill fit seem affect job satisfaction positively. Second, the negative effects of over-education are clear and the negative effects of under-education are unclear, while the effects of over-skilled and under-skilled are insignificant statistically. Third, the results imply that the size of effect of over-education on intrinsic job satisfaction is larger than that of the effect of over-skilled. Forth, it is shown that the use of fixed effect model is more effective and trustworthy than that of random effect model and pooled OLS estimation method, implying that the effect size of coefficients which are estimated by pooled OLS method and random effect model are likely over-estimated. The empirical results above imply that firms and employees should focus on solving over-education issue before all in order to enhance employees' job satisfaction and it is needed to monitor regularly whether systemic job assignment process is done based on the employees' educational attainment and skill level and to provide more chances for job re-allocation and job rotation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.145-155
• /
• 2023

Objectives: A fit test panel is needed to identify the fit performance of a respirator and its face seal. This is a criterion for selecting subjects that can represent the facial characteristics of users. Although anthropometry data has been developed for people in United States and China it is not yet present in Korea. This study aimed to develop a Korean fit test panel and test headform. Methods: For the 7th and 8th waves of the Size Korea anthropometry data, facial measurements of 11,429 people aged 15 to 69 years were used for analysis. PCA and bivariate panel were classified using the ISO16976-2:2022(E) anthropometrics analysis method. Based on this result, a static headform was developemed and a fit test chamber was constructed. Results: Of the 11,429 Korean people used for principal component analysis, 11,300 were included in the ellipse, marking an acceptance rate of 98.87% on PCA panel. The face types were classified into five types. Among them, a large, medium, and small static headform were printed using a 3D printer. In addition, 10,985 people (96.12%) were included in the bivariate panel based on face length and face width. The y-axis (face length) boundary was 97.87 to 134.59 mm, and the x-axis (face width) boundary was 120.75 to 158.23 mm. Conclusions: Compared to the ISO analysis, the Korean principal component was narrower in the width item (PC1) and longer in the length item (PC2). For the future, it is necessary to conduct a fit test using the developed headform and chamber device to confirm the usefulness of this Korean test panel. Therefore, this study is considered valuable as basic research for Korean test panels.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.63-69
• /
• 2019

Soldering technology has been used in electronic industry for a long time. However, due to solder fatigue characteristics, automotive electronics are searching the semi-permanent interconnection technology such as press-fit method. Press fit interconnection is a joining technology that mechanically inserts a press fit metal terminal into a through hole in a board, and induces a strong bonding by closely contacting the inner surface joining of the through hole by plastic deformation of press-fit terminal. In this paper, the bonding properties of press-fit interconnection are investigated with PCB hole size and surface finishes. In order to compare interconnection reliability between the press fit and soldering, the change in resistance of the press-fit and soldering joints was observed during thermal shock test. After thermal cycling, the failure modes are investigated to reveal the degradation mechanism both press-fit and soldering technology.