• 소성∙가공
• /
• 제14권4호
• /
• pp.360-367
• /
• 2005

The injection-molded plastic parts have many surface defects: warpage, weldline, flowmark, zetting, scratching, shading and so on. As weldline was one of the major surface defects in the case of desktop monitor, warpage and surface shrinkage are the bigger problems of LCD monitor in the pursuit of light weight and thinner thickness of parts. Some measures to improve these defects were introduced in this paper. Based on these, the laboratory work to find out the optimum processing conditions and to get the best parts was repeated injection moulding try-out after reflecting these improvements. The defects of warpage and surface shrinkage was significantly improved after the improvements in the case of the 20.1 inch even if in the 15 and 17inch case the warpage size was a lttle over the allowed specification because of not taking the measure for parts design within the allowable limits from the required specification in the cause of cost down.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.214-215
• /
• 2005

Naval equipments are installed and used for naval vessel with different environmental conditions comparing to the commercial vessel, for example, high engine power per ship displacement size, severe vibration and shock due to high running speed and explosion from naval gun's bombardment and underwater weapons. Therefore, those equipments must be installed on shipboard with small spaces, high ambient temperature around engine room and which are required be fabricated with high resistances of vibration, shock and heat resources. But in case of commercial vessel, the performances of their recent equipments naval have been improved continuously due to the technology development of domestic shipbuilding and shipboard equipment industries, together with the related fundamental industries i.e, metal, steel and electronic industries, to an international level since 1970. With these results, it became possible to unify the specifications of shipboard equipments for the commercial and military vessels(Dual-Use). In this study, vibration and shock test standards for the commercial and military vessels will be compared and reviewed technically.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.808-812
• /
• 1996

Reduction gear with internal gear pair need functions such as compact size, high reduction ratios, high transmission efficiency, and low noise. Feasible design region of the internal gear pair with a small tooth difference is extremely limited because the internal gear pair is subject to interference in meshing and cutting. Single-objective optimal design can not simulataneously satisfy the manifold requirements of the internal gear pair and can not determine the economical specification of a pinion cutter. Multi-objective optimal design which include the specification of the pinion cutter in design variables is developed, considering the manufacturing error of an internalgear pair and the re-sharpening of the pinion cutter.

• Steel and Composite Structures
• /
• 제7권3호
• /
• pp.201-217
• /
• 2007

Two combinatorial optimization algorithms, tabu search and simulated annealing, are presented for the minimum-weight design of geometrically non-linear steel plane frames. The design algorithms obtain minimum weight frames by selecting suitable sections from a standard set of steel sections such as American Institute of Steel Construction (AISC) wide-flange (W) shapes. Stress constraints of AISC Load and Resistance Factor Design (LRFD) specification, maximum and interstorey drift constraints and size constraints for columns were imposed on frames. The stress constraints of AISC Allowable Stress Design (ASD) were also mounted in the two algorithms. The comparisons between AISC-LRFD and AISC-ASD specifications were also made while tabu search and simulated annealing were used separately. The algorithms were applied to the optimum design of three frame structures. The designs obtained using tabu search were compared to those where simulated annealing was considered. The comparisons showed that the tabu search algorithm yielded better designs with AISC-LRFD code specification.

• 융합보안논문지
• /
• 제5권1호
• /
• pp.45-52
• /
• 2005

본 논문에서는 차세대 인터넷 서비스를 지원하기 위한 광버스트 교환 시스템(Optical Burst Switching System : OBS)의 개발 규격을 제시한다. 개발 규격이란 입출력 노드의 수, 파장의 수, 버퍼의 용량, 컨트롤러의 용량/큐 크기 및 최대 버스트 조립 지연시간을 포함한다. 개발 규격을 제시하기 위하여 관련된 성능 파라메터를 추출하고 시스템의 성능을 최대화하며 가입자의 데이터 손실율을 최소화하는 수학적 모형을 제시하고 효율적인 휴리스틱 알고리즘을 제시한다. 그리고 여러 성능 파라메타들에 대한 시스템의 민감도를 분석한다.

• 품질경영학회지
• /
• 제38권4호
• /
• pp.587-592
• /
• 2010

This paper deals with the performance evaluation of determining production size specifications. A customer who does not find the size specification he or she wants may purchase rather a larger or smaller one, but the purchasing desire decreases as the difference between the required and the prepared sizes increases. Introducing a generalized quality loss function which reflects how much the purchasing desire changes according to the difference, Park and Kim(1992) formulated a mathematical model for determining the size specifications so as to minimize the expected loss. Afterward the model has been applied to the determination of sizing system for mail order clothing and brassiere (Lee and Choi, 1996; Chun, et.al., 1996). The performance of the size determination method proposed by Park and Kim is evaluated in this paper. Usually the intervals between two successive size specifications are determined to be equal, but the size determination method compares favorably with the equidistance case, and more favorably if the population distribution is more skewed.

• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1302-1307
• /
• 2011

본 논문은 코일 제작 시 고려사항인 1, 2차측 코일 인덕턴스, 턴수, 크기, 두께, 차폐지 등을 고려하여 리쯔 와이어로 나선형 코일을 제작하는데 이때 반자동화 권선기를 사용하게 된다. 1, 2차측 코일 사양을 정하여 코일을 제작할 때 다양한 사양의 리쯔 와이어와 나선형 코일을 필요로 하게 되는데, 이때 제작 비용, 기간, 제작 시 발생하는 불량 등으로 인해 코일 샘플 제작에 어려움이 발생하고 원하는 사양의 코일 품질 관리에도 어려움이 생기게 된다. 이를 개선하기 위해 2차측의 정류부를 개선함으로써 코일 설계 및 제작 시 다양한 코일 제작 사양의 범위를 좀더 포괄적으로 할 수 있으며 제작 시 발생하는 비용을 줄이고, 기간 단축 및 코일의 품질 관리를 개선하고자 한다.

• 한국의류학회지
• /
• 제34권1호
• /
• pp.67-78
• /
• 2010

This paper analyzes how to measure breast volume and the change in breast volume after wearing a brassiere. Measurement using a breast replica is used to measure the breast volume of 41 women in their twenties. The rate of persons having flat and hemispherical breast are high. The majority of subjects are size 75A, 80A, and 75B, and their under-bust size is 70. The current size specification should be refined for fitting according as the girth under bust decreases. The correlation between breast volume and the circumference of the breasts was high. It was more reliable to set up the cup size of a brassiere using the breast circumference. The mean breast volume is 263.68cc (nude) and the total volume wearing brassiere is 342.05cc. The volume difference according to wearing a brassiere is 78.37cc, which is less than the brassiere volume itself. The results show, the less breast volume of a subject, then the greater volume in wearing a brassiere.

• 한국의류학회지
• /
• 제22권8호
• /
• pp.1090-1098
• /
• 1998

The purpose of this study was to classify size specifications of the Korean adult male for the men's ready-made garments, especially jacket and dress shirts. By the stratified sampling method, data were collected by the real anthropometric measurement and by the photo-graphic sources. Sample size was 532 subjects as the sample and their age range was from 28 to 35 years old. 66 variables from the direct anthropometric data in total were applied to analyze. ANOVA in SPSS WIN package was applied to the data and the expected frequency distribution of 10.000 men was calculated by the extraction of density function. This study was performed to classify size specifications by the control dimensions and at the same interval of KS-K. The drop values of 15, 12 and 9 have the high coverage rate of 26.00%, 24.29% and 21.06% respectively and are composed of the majority of 71.35% of the subjects. According to the drop values, size specifications and distribution of control and reference dimensions are predicted. About 52.12% of the expected frequency distribution without stature were covered by 12 size specifications.

• 한국통신학회논문지
• /
• 제27권2C호
• /
• pp.150-159
• /
• 2002

본 논문지 MCNS(Multimedia Cable Network System) DOCSIS(Data Over Cable Service Interface Specification) v1.0/v1.1 표준안에 대응하는 케이블모뎀 수신단의 FS-DFE(Fractionally Spaced-Decision Feedback Equalize)에 적용될 다양한 LMS(Least Mean Square)알고리즘에 관하여 수렴특성, SER(Symbol Error Rate) 및 MSE(Mean Square Error) 성능, 하드웨어 복잡도 그리고 step-size(${\mu}$)와의 관계를 $SPW^{TM}$로 모델링하고, 그들 개개의 성능을 보여다. 그리고 Verilog-HDL을 이용하여 RTL 구조를 구성하였고, $SYNOPSYS^{TM}$을 통해 삼성 STD90 라이브러리로 합성하였다. 또한 본 논문에서는 최적의 하드웨어 구조를 가지기 위한 time-multiplexed multiplication 과 tap shared architecture구조를 채택하였다. 실험 결과를 통하여 LMS, DS(Data Signed)-LMS, ES(Error Signed)-LMS, SS(Signed Signed)-LMS[1][3]과 같은 다양한 LMS 알고리즘들 중 DS-LMS 알고리즘이 성능과 하드웨어를 고려한 최적의 알고리즘임을 보였고, DS-LMS 알고리즘 및 여러 가지 저면적 점유 기법을 이용하여 최대 58%까지 하드웨어 면적을 줄일 수 있었다.