• 복식문화연구
• /
• 제28권5호
• /
• pp.639-651
• /
• 2020

This study utilized data to classify and characterize the body types of plus-size adult men aged in their 30s and 40s. Diversity is an important factor in the era of inclusive design, and discussion about size diversity to include the plus size should be accommodated. Data from 493 adult men classified as obese (with a World Health Organization criterion ≥25 BMI) were used for the analysis. The results of the study are as follows. Six independent factors were extracted using factor analysis for cluster analysis, which were then classified into five types. Type 1 (29.01%) was identified as body type I with the smallest degree of obesity. Type 2 (15.4%) was identified as body type Y with wide shoulders and a thin waist. Type 3 (14.2%) was the largest body volume (body type O), while the fourth (19.27%) identified as body type H has a large height and upper body. Lastly, type 5 (22.11%) has a long lower body and a slim abdomen, referred to as body type X. This study presents a basis for the development of various clothing sizes utilizing the body shape characteristics of plus-size men in their 30s and 40s. Follow-up research is needed to develop patterns for plus size men and to design various products.

• 한국의상디자인학회지
• /
• 제24권3호
• /
• pp.111-125
• /
• 2022

Recently, the MZ generation has been leading overall fashion trends, and fashion companies focus on design, marketing, and new products targeting the MZ generation. However, it is expected that a fit problem may occur if the M and Z generations are combined when producing clothing. Therefore, this study aims to analyze the differences between the two groups by comparing the body size according to the classification of the M and Z generations. In addition, this study analyzes whether the body shape of the MZ generation is different from the past generations and analyzes major changes in body size for clothing manufacturing through graphical visualization. As for the research method, a t-test was conducted to verify the significant difference between the measurements for each age group. Generation M was defined as those who are 27-39 years old, and Generation Z was defined as those who are 20-26 years old. In order to examine the changes in body measurements according to the measurement year, the 7th Size Korea and 8th Size Korea data were analyzed. In order to examine the visual changes according to the measurement year and age group, major measurements of clothing construction were analyzed. As a result, it was found that Generation M had a significantly higher height item than Generation Z. Also, in terms of circumference, width, and thickness, Generation M was larger than Generation Z. But the size of the bra cup was larger in Generation Z than Generation M. As a result of analyzing the body size changes, in the height item, the 8th Size Korea measurements were found to be significantly higher in shoulder height and navel level waist height. In the length and circumference items, the 8th Size Korea measurements were larger than the 7th. In the width, thickness, and other items, the 8th measurements were larger than the 7th.

• 기술혁신학회지
• /
• 제5권3호
• /
• pp.396-411
• /
• 2002

This is an analysis of international mobile displays industry. There has been severe competition in market and technology. In technology, There has been competition between Japan, USA and Korea. On the other hand, there has been competition in the products market between Korea, Japan and Taiwan. Recently Korea has catched-up Japan in mid-size display industry. The response of Japanese firms are as follows: technological collaboration with Taiwanese firms in mid-size and concentration in small and large size displays. New competition, however, has started, since new technologies such as TFT-LCD and OELD have been used in products.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 2부
• /
• pp.937-940
• /
• 2010

본 연구는 fine blanking 프레스로부터 기능면으로 사용되는 100% clean cut 전단면을 얻는 fine blanking 공정에서 die roll을 최소화하기 위한 목적으로 성형 해석 및 실험적 방법을 통해 die chamfer 형상에 따라 성형되는 제품의 die roll size 변화를 검토한 것이다. fine blanking 과정을 묘사하기 위하여 deform 2D를 이용하여 성형 해석을 수행하여 die roll size를 예측하였으며, 실제 die chamfer가 다른 die insert를 제작하여 fine blanking 실험을 실시하여 die chamfer 형상에 따른 die roll size에 대한 해석 data와 실험 data를 비교 분석하여 die roll 길이 방향 size의 경향을 파악할 수 있었다. 이 연구 결과는 fine blanking 판재 성형에서 die roll을 최소화하기 위한 die chamfer 설계에 유용하게 적용될 것으로 판단된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.406-408
• /
• 2006

Various geological thematic maps such as grain size or ground water level maps have been generated by interpolating sparsely sampled ground survey data. When there are sampled data at a limited number of locations, to use secondary information which is correlated to primary variable can help us to estimate the attribute values of the primary variable at unsampled locations. This paper applies two multivariate geostatistical algorithms to integrate remote sensing imagery with sparsely sampled ground survey data for spatial estimation of grain size: simple kriging with local means and kriging with an external drift. High-resolution IKONOS imagery which is well correlated with the grain size is used as secondary information. The algorithms are evaluated from a case study with grain size observations measured at 53 locations in the Baramarae beach of Anmyeondo, Korea. Cross validation based on a one-leave-out approach is used to compare the estimation performance of the two multivariate geostatistical algorithms with that of traditional ordinary kriging.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2401-2404
• /
• 2007

Particle size of silicones can be controlled by changing the reaction conditions such as temperature and concentrations of water and tetramethoxysilane (TMOS). Alternatively, the use of ultrasound radiation is also an elegant technique to decrease the particle size. Small silicone particles can be obtained at low temperature from diluted reagent containing TMOS, especially under the powerful ultrasound radiation. The size control may be explained by the rate of particle growth rather than that of nucleation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.111-120
• /
• 2006

Opening size of 3 types of geotextile were tested using dry and wet sieving methods to evaluate characteristics of test methods and to compare the test results. Judging from test results, dry sieving method is a poor test, having many problems causing many errors but a simple-quick test. Wet sieving method is a very specific test avoiding many of the problems of dry sieving such as electrostatic charges, trapping in the geotextiles and so on. However, one of wet sieving tests, KSK ISO12956, takes long time to complete a test and is too strict to handle loss of granular material. Generally, opening size of a geotextile by wet sieving test is smaller than that of dry sieving test. Especially, opening size by KSF 2126 which is one of wet sieving test but disused at present anymore is similar or smaller than that by KSK ISO12956 method.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2007년도 추계학술대회
• /
• pp.263-268
• /
• 2007

The main objective of this study is to provide numerical guideline for size establishment of safety shoes about adult men(over 20 years) compared to physical standards of nation (report published in 1997). The sample for this work was chosen from data which were collected and measured by Size Korea during two years (2003${\sim}$2004). In order to analyze and compare features of men's foot, analysis was performed about 1,685 subjects on 2 parts such as foot length and foot circumference. For the specific comparison on foot size, Mollison's comparison graph was used. The result of this study can be applied in manufacturing and design of shoes and socks. Also, it will enable us to have fruitful information on considerable items during manufacturing and design of safety shoes.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권2호
• /
• pp.39-43
• /
• 2013

$MgB_2$ bulk samples are synthesized through solid state reaction route using Mg precursors with different particle size by keeping the boron precursor unchanged. Scanning electron microscopy study of the fractured surface for all the samples depicts quite distinct structure depending on the Mg precursor. Big size of Mg precursor resulted in to largely elongated and deep pores while smaller one gave roughly ellipsoidal and shallow pore structure. Influence of the Mg particle size on the grain to grain connectivity reflected in the critical current density value which was greater for samples with smaller Mg precursor. All the synthesized samples undergo a superconducting transition at around 36.5 K irrespective of different Mg precursor particle size.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.188-192
• /
• 2002

To introduce flux pinning center in HTS-BSCCO system, nano-size MgO particles were uniformly distributed within the Bi-2223 grain by partial hydration of MgO. The existing method MgO doped Bi-2223 used nato-size MgO powders, which resulted in agglomeration during mixing or grain growth during heat-treatment due to the high surface energy of the fine particles. By hydration of the MgO surface, the agglomeration of the MgO powders was avoided and the size of remaining MgO core was controlled by changing hydration medium and time. The thin film obtained by spin coating of (Bi_$1.8/Pb_{0.4}$)$Sr_2$$_{Ca}$$2.2/Cu_3$ $O_{y}$ nitrate solution mixed with hydrated MgO showed the even distribution of nano-size MgO particles in the Bi-2212 grains.s.s.