• Journal of Korean Society on Water Environment
• /
• v.24 no.6
• /
• pp.682-689
• /
• 2008

The purpose of this study was to find out the variation between molecular size distribution (MSD) of natural organic matter (NOM) in raw waters after different water treatment processes like conventional process (coagulation, flocculation, filtration) followed by advanced oxidation process (ozonation, GAC adsorption). The MSD of NOM of Suji pilot plant were determined by Liquid Chromatography-Organic Carbon Detection (LC-OCD) which is a kine of high-performance size-exclusion chromatography (HPSEC) with nondispersive infrared (NDIR) detector and $UV_{254}$ detector. Five distinct fractions were generally separated from water samples with the Toyopearl HW-50S column, using 28 mmol phosphate buffer at pH 6.58 as an eluent. Large and intermediate humic fractions were the most dominant fractions in surface water. High molecular weight (HMW) matter was clearly easier to remove in coagulation and clarification than low molecular weight (LMW) matter. Water treatment processes removed the two largest fractions almost completely shifting the MSD towards smaller molecular size in DW. No more distinct variation of MSD was observed by ozone process after sand filtration but the SUVA value were obviously reduced during increase of the ozone doses. UVD results and HS-Diagram demonstrate that ozone induce not the variation of molecular size of humic substance but change the bond structure from aromatic rings or double bonds to single bond. Granular activated carbon (GAC) filtration removed 8~9% of organic compounds and showed better adsorption property for small MSD than large one.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.2
• /
• pp.14-26
• /
• 2002

A new model for degenerate semiconductor quantum well devices was developed. In this model, the multi-subband Boltzmann transport equation was formulated by applying the Pauli exclusion principle and coupled to the Schrodinger and Poisson equations. For the solution of the resulted nonlinear system, the finite difference method and the Newton-Raphson method was used and carrier energy distribution function was obtained for each subband. The model was applied to a Si MOSFET inversion layer. The results of the simulation showed the changes of the distribution function from Boltzmann like to Fermi-Dirac like depending on the electron density in the quantum well, which presents the appropriateness of this modeling, the effectiveness of the solution method, and the importance of the Pauli -exclusion principle according to the reduced size of semiconductor devices.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.208-210
• /
• 2002

Baker's yeast was cultured with $Na_2SeO_3$. Selenium compounds in yeast were extracted and analyzed by size exclusion chromatography. Selenium was broadly distributed in the fraction of protein. For the inhibition test of MMP-l induction, selenium containing compounds was fractioned by ultrafiltration

• Bulletin of the Korean Chemical Society
• /
• v.17 no.7
• /
• pp.648-653
• /
• 1996

We have shown several examples of characterization of multicomponent polymer systems by size exclusion chromatography coupled with a light scattering detector. Although SEC cannot provide a complete information for such systems due to its intrinsic limitation, one can extend its capability by combining multiple detection in order to get relevant information to some extent.

• BMB Reports
• /
• v.35 no.3
• /
• pp.255-261
• /
• 2002

GTP cyclohydrolase I (E.C. 3.5.4.16) is a homodecameric protein that catalyzes the conversion of GTP to 7,8-dihydroneopterin triphosphate (H2NTP), the initial step in the biosynthesis of pteridines. It was proposed that the enzyme complex could be composed of a dimer of two pentamers, or a pentamer of tightly associated dimers; then the active site of the enzyme was located at the interface of three monomers (Nar et al. 1995a, b). Using mutant enzymes that were made by site-directed mutagenesis, we showed that a decamer of GTP cyclohydrolase I should be composed of a pentamer of five dimers, and that the active site is located between dimers, as analyzed by a series of size exclusion chromatography and the reconstitution experiment. We also show that the residues Lys 136, Arg139, and Glu152 are of particular importance for the oligomerization of the enzyme complex from five dimers to a decamer.

• Food Science and Biotechnology
• /
• v.16 no.2
• /
• pp.270-274
• /
• 2007

To characterize the polysaccharides which exist as soluble forms in fruit wines, crude polysaccharides were isolated from red, white, raspberry, wild grape, and pear wine, respectively. Among them, the crude polysaccharide (RW-0) in red wine showed the highest yield and considerable amounts of thiobarbituric acid (TBA)-positive materials. The pectic polysaccharide RW-2 was purified to homogeneity from RW-0 by subsequent size-exclusion chromatography using Sephadex G-75 and its structure was characterized. RW-2 consisted of 14 different monosaccharides which included rarely observed sugars in general polysaccharides, such as 2-O-methyl-fucose, 2-O-methyl-xylose, apiose (Api), 3-C-carboxy-5-deoxy-L-xylose (aceric acid, AceA), 3-deoxy-D-manno-2-octulosonic acid (Kdo), and 3-deoxy-D-lyxo-2-heptulosaric acid (Dha). Methylation analysis indicated that RW-2 comprised at least 20 different glycosyl linkages such as 3,4-linked fucose, 2,3,4-linked rhamnose, 3'-linked apiose, and 2,3,3'-linked apiose, being characteristic in rhamnogalacturonan II (RG-II). High performance size-exclusion chromatography indicated that RW-2 mainly comprised RG-II of higher molecular weight (12,000), and that the changes of molecular weight to apparent 7,000 under less than pH 2.0 were observed. These analyses indicated that the higher molecular weight polysaccharide in RW-2 was mainly present as a RG-II dimer.

• Membrane and Water Treatment
• /
• v.6 no.2
• /
• pp.127-139
• /
• 2015

Rejection of ionic solutes by reverse osmosis (RO) and nanofiltration (NF) membranes is controlled mainly by electrochemical interaction as well as pore size, but it is very difficult to directly evaluate such electrochemical interaction. In this work, we used an inverse HPLC method to investigate the interaction between ionic solutes and poly (m- phenylenediaminetrimesoyl) (PPT), a polymer similar to the skin layer of polyamide RO and NF membranes. Silica gel particles coated with PPT were used as the stationary phase, and aqueous solutions of the ionic solutes were used as the mobile phase. Chromatographs obtained for the ionic solutes showed features typical of exclusion chromatographs: the ionic solutes were eluted faster than water (mobile phase), and the exclusion intensity of the ionic solute decreased with increasing solute concentration, asymptotically approaching a minimum value. The charge density of PPT was estimated to be ca. 0.007 mol/L. On the basis of minimum exclusion intensity, the exclusion distances between a salt and neutralized PPT was examined, and the following average values were obtained: 0.49 nm for 1:1 salts, 0.57 nm for 2:1 salts, 0.60 nm for 1:2 salts, and 0.66 nm for 2:2 salts. However, $NaAsO_2$ and $H_3BO_3$, which are dissolved at neutral pH in their undissociated forms, were not excluded.

• Membrane and Water Treatment
• /
• v.8 no.4
• /
• pp.369-380
• /
• 2017

Performance evaluation of four commercially available tubular membranes (AFC 80, AFC 30, PU 608, ES 404) was accomplished in self-assembled membrane testing unit. Effects of varying transmembrane pressure, feed concentration and anion type were investigated. Aqueous solutions of salts such as calcium chloride, calcium sulfate, tin chloride and tin sulfate were prepared for this study. It was noted that the investigated parameters e.g., pressure and concentration had significant effects on membrane's performance. Nevertheless, anion type effectively played its role in the rejection of salts since salt having SO4-2 anions had a better rejection than the salts containing Cl-1. It is observed that rejection was dominated by Donnon exclusion for strongly charged nanofiltration membranes whereas for weakly charged ultrafiltration membranes, size exclusion was the key mechanism to reject the ions.

• Journal of Life Science
• /
• v.25 no.6
• /
• pp.631-637
• /
• 2015

Streptavidin, a protein produced by Streptomyces avidinii, strongly binds up to four molecules of vitamin H, d-biotin exhibiting the dissociation constant of about 10⁻¹⁵ M. This strong binding affinity has been applied for detection and characterization of numerous biological molecules suggesting expression and purification of functional streptavidin should be very useful for the application of this streptavidin-biotin interaction. To express a soluble streptavidin in Escherichia coli, We synthesized streptavidin genes and cloned into pET-22b plasmid, which uses T7 RNA polymerase/T7 promoter expression systems containing pelB leader for secretion into periplasmic space and six polyhistidine tags at C-terminus for purification of expressed proteins. Although streptavidin is toxic to Escherichia coli due to strong biotin binding property, streptavidin was expressed very sufficiently in a range of 10-20 mg/ml. In SDS-PAGE, the size of purified protein was shown as 17 kDa in denatured condition (boiling) and 68 kDa in native condition (without boiling) suggesting tetramerization of monomeric subunit by non-covalent association. Further analysis by size-exclusion chromatography supported streptavidin’s tetrameric structure as well. In addition, soluble streptavidin detected biotinylated proteins in westernblot indicating its functional activity to biotin. Taken these results together, it concluded that our simple expression system was able to show high yield, homotetrameric formation and biotin binding activity analogous to natural streptavidin.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.446-450
• /
• 1996

To investigate the effect of heating conditions on the polymerization of methyl linoleate, the esters were heated at $60^{\circ}C,\;90^{\circ}C,\;120^{\circ}C$ and $150^{\circ}C$, respectively, with sparging oxygen for different periods of time. On the basis of the peroxide curve obtained at each of the four temperatures, four heating times were chosen for the analysis of the polymers and total oxidation products. Significant linear relationships were found between polymer contents and total oxidation product contents. The contents of polymers and their linkage types were analyzed by High Performance Size Exclusion Chromatography. The polymers formed at four temperatures were qualitatively identified as dimers. The dimers with peroxide linkages were detected from methyl linoleate oxidized at $60^{\circ}C\;and\;90^{\circ}C$ but they were not detected from methyl linoleate oxidized at $120^{\circ}C\;and\;150^{\circ}C$. Therefore, all dimers formed at $120^{\circ}C\;and\;150^{\circ}C$ seemed to be the ones with ether linkage or carbon to carbon linkage. The degradation rate of the dimers with peroxide linkages at $90^{\circ}C$ was faster than at $60^{\circ}C$.