• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.224-227
• /
• 1993

In this paper, a new LMS algorithm with a variable step size (VVS LMS) is presented. The change of step size .mu. at each iteration, which increases or decreases according to the misadaptation degree, is computed by a proportional fuzzy logic controller. As a result the algorithm has very good convergence speed and low steady-state misadjustment. The norm of the cross correlation between the estimation error and input signal is used. As a measure of the misadaptation degree. Simulation results are presented to compare the performance of the VSS LMS algorithm with the normalized LMS algorithm.

• Journal of Industrial Technology
• /
• v.13
• /
• pp.33-41
• /
• 1993

In this paper, a new LMS algorithm with a fuzzy variable step size (FVS LMS) is presented. The change of step size ${\mu}$, at each iteration which is increases or decreases according to the misadaptation degree, is computed by a proportional fuzzy logic controller. As a result the algorithm has very good convergence speed and low steady-state misadjustment. As a measure of the misadaptation degree, the norm of the cross correlation between the estimation error and input signal is used. Simulation results are presented to compare the performance of the FVSS LMS algorithm with the normalized LMS algorithm.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.6
• /
• pp.61-69
• /
• 2004

The aim of the work described in this paper was to confirm the application of the equation of the soil-water characteristic curves on an unsaturated soil. A series of suction test for unsaturated soils was conducted on the selected 4 kinds of soil using modified pressure extractor apparatus. And it was carried out to analyse The experimental parameters which can be describe the soil-water characteristics, were determined by using the data obtained from the experiment. From the results, it was found that The matric suction varied according to the grain size distribution, amount of fine grain particles and void ratio. Also it was found that the residual degree of saturation was decreased with in crease of the void ratio, but the pore size distribution index and air entry value were increased with in crease of the void ratio. And The application of the soil-water characteristic curve equation was confirmed for the various conditions and the various state by the comparison between the measured degree of saturation and the predicted degree of saturation.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.803-809
• /
• 2004

In order to activate the characteristics of charcoal in fiber systems, this was carried out to experiment with the particle size from two micrometers to ten micrometers of charcoal powders on cotton fabrics. The results obtained were as follows; The fabrics were dyed with gray colors by charcoal. The K/S values, that were indicative of the dye affinity, became higher as the increase of dyeing temperature, dyeing time, and dyeing concentration. Also it was confirmed the morphology of the fiber surfaces adsorbed with the particle size from two micrometers to four micrometers of charcoal powder by scanning electronmicronscope. The cotton fabrics dyed by charcoals generally recorded 3-4 degree of wash fastness, 4-5 degree of dry-cleaning fastness, 4-5 degree acidic and alkaline perspirations and water fastness. In connection with the functional properties, cotton fabrics dyed with charcoal appeared that antibacterial, deodorization, far infrared emissivity were improved. Especially the deodorization was improved greatly by using charcoal.

• Knowledge Management Research
• /
• v.7 no.2
• /
• pp.69-96
• /
• 2006

The purpose of this study is to find success factors of knowledge management in Korean firms, confirm them empirically, and verify their relative importance in terms of company size and industry type. The major studies on the knowledge management were deliberately selected and interpretively analyzed to find the success factors of Korean firms. As a result of the analysis, five success factors(top management's will, evaluation reward, organizational culture, knowledge management system, organizational structure) have been found. The empirical researches to make certain whether the above five factors derived are actually true or not have been separately performed by using questionnaire method. Based on the data collected, it is found that all five factors are significant. The degree of relative importance among the success factors of knowledge management in Korean firms has been found as: (i)top management's will, (ii)organizational culture, (iii)evaluation-reward, (iv)knowledge management system, (v)organizational structure. In company size, large firm's degree of relative importance among the success factors are: (i)top management's will, (ii)organizational culture, (iii)evaluation-reward, (iv)knowledge management system, (v) organizational structure. And medium-small firm's degree of relative importance among the success factors of knowledge management in Korean firms has been found as: (i)top management's will, (ii)organizational culture, (iii) evaluation-reward, (iv)knowledge management system, (v)organizational structure. Finally, in type of industry, manufactural firm's degree of relative importance among the success factors of knowledge management in Korean firms has been found as: (i)top management's will, (ii)organizational culture, (iii)evaluation-reward, (iv)knowledge management system, (v)organizational structure. And non-manufactural firm's degree of relative importance among the success factors of knowledge management in Korean firms are: (i)top management's will, (ii)organizational culture, (iii)evaluation-reward, (iv)knowledge management system, (v)organizational structure.

• Journal of Korea Foundry Society
• /
• v.16 no.6
• /
• pp.565-575
• /
• 1996

In this study, to gain the semi-solid alloy we employed the electromagnetic rotation by a induction motor of 3-phases and 2-poles for Al-7wt%Si alloy and observed the size of primary solid particle, distribution state of primary solid particle, the degree of sphericity, and fraction of primary solid for the evaluation of its results. The size of primary solid particle increases from $98{\mu}m$ to $118{\mu}m$ as solid fraction increases from 0.2 to 0.5. The degree of sphericity increased as the solid fraction increased. Solid particles obtained from the microstructures of isothermally held sample were coarsened and the degree of sphericity was enhanced as isothermal holding time increased. However, when the sample was stirred for more than 40min, solid particles merged together and liquid phase was entrapped within the cluster of solid particles. The size of primary solid particle was not changed significantly with the variation of input voltages by 160V over which solid particles began to merge together to be a large cluster of about $170{\mu}m$ at 180V. The standard deviation and the degree of sphericity were not changed significantly with the variation of input voltage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.8 no.1
• /
• pp.29-37
• /
• 1984

This study was investigation of the change of fine structure of hemp cellulose at different growing stages. The samples collected about every eight day were divided into seven groups based on plants height, then they were numbered from 1 to 7 in the order of their height. For this, the degree of crystallinity, orientation and crystallite size were measured by wide angle X-ray diffraction method. The results of this experiment were summerized as follows ; 1) The degree of crystallinity was increased by growth of hemp celtilose to be maximum in sample 5$\~$6. At this stage, the stability of crystals was showed in good states. In addition to, crystallinity index by Segal, Turley and area method showed same tendency as Ruland's. 2) The change of orientation was gradually increased by growth of hemp cellulose. This result was correlated with the degree of crystallinity. Therefore, the change of orientation depend on the degree of crystallinity. 3) On the other hand, the crystallite size was decreased by growth of hemp cellulose. But, increased after sample 4. By the way, crystallite size was interrelated with growth rate.

• Journal of the Korean Mathematical Society
• /
• v.46 no.4
• /
• pp.759-773
• /
• 2009

A dominating set for a graph G is a set D of vertices of G such that every vertex of G not in D is adjacent to a vertex of D. Reed [11] considered the domination problem for graphs with minimum degree at least three. He showed that any graph G of minimum degree at least three contains a dominating set D of size at most $\frac{3}{8}$ |V (G)| by introducing a covering by vertex disjoint paths. In this paper, by using this technique, we show that every graph on n vertices of minimum degree at least four contains a dominating set D of size at most $\frac{4}{11}$ |V (G)|.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.94-101
• /
• 2020

This helps plus-size consumers purchase ready-made clothes and improves fitness by analyzing the upper body shapes of abdomen-obese adult males; in addition, it creates a size system based on each size interval of obesity shapes. The criteria for the 572 male subjects surveyed were over 25 kg/㎡ of the BMI, over 90 cm of waist, and over 0.85 waist hip ratio. The results were as follows. First, the higher the age group, the higher the degree of abdominal obesity in each age group. The degree of obesity decreases age increase; however, was the risk of abdominal obesity increased. Second, Compared to standard body types, the average body size of Abdomen-obese males is significantly larger, especially in the waist area than in the chest area. Third, to propose a size system for abdominal obese adult males, 16 sections with a final 2% rate of appearance were finally adopted as suit-tops size system for abdominal obese adult males by applying a 3 cm dimension gap between each designation as specified in the KS standard. The coverage ratio for the 16 sections was 72.6% and the coverage effienciency was 4.5%. The results of this study can be used in a various clothes; in addition, the activation and segmentation of the plus-size market are also believed to be significant.

• Fashion & Textile Research Journal
• /
• v.11 no.6
• /
• pp.904-910
• /
• 2009

The aim of this study is to help out-size consumers purchase the ready-made clothes and improve clothing fitness by classifying the lower bodies of abdomen-obese adult males and by setting up some size system according to each size interval of obesity types. The including criteria for subjects in this study was over 25 kg/$m^2$ of the BMI, over 90 cm of waist, and over 0.85 of WHR, and a total of 538 adult males satisfying them were enrolled. Results are as follows; 1st, the higher the age bracket was, the more increase in each age bracket's lower-degree obesity rate there was along with the more decrease in moderate-degree, while the higher the age bracket was, the more increasing tendency toward each age bracket's abdominal obesity there was. 2nd, 3 clusters were categorized by cluster analysis, into abdominal obesity, high-degree-type, trapezoid-type and cylinder-type. And 3rd, as a consequence of size system establishment according to lower-body types, the basic body sizes and reference body sizes were different according to types even in commonly-appeared size names at sections of respective types. The research findings above suggests that it is necessary to figure out the obesity types according to waist and hip sizes representing basic sizes and to design the patterns in consideration of the characteristics of obese body shapes when lower-half body clothes are designed among obesity groups. And it may be used as a basic data to decide the desirable output of production according to respective body types.