• 한국해양학회지
• /
• v.5 no.1
• /
• pp.37-40
• /
• 1970

This work concerns age studies of the spanish mackerel by vertebrae. The spanish mackerel samples were obtained mainly from Yosoo and Inchon regions during July to December, 1969. A total of 292 fish was collected during the present study. Except the vertebrae, the incremental growth is found to be vague or complicated on the most bony parts in spanish mackerel. The spanish mackerel has 50 vertebrae, and the size of vertebra varies according to its position. After several studies, therefore, sample centrum was selected from the 23rd vertebra throughout the present study. Sample centrum was then stained with Alizarin Red S. and examined under binocular stereoscopic microscope illuminated by reflected light. The surface of the centrum shows many ring-marks running parallel to the edge. The ring-marks were counted and the measurements of centrum radius (R) and radii of the ring-marks (r$\_$i/) were made by eyepiece micrometer. From available data, the average of each ring-mark radius was found to be; r$\_$1/=2.05mm, r$\_$2/=3.11mm, r$\_$3/=4.05mm, r$\_$4/=4.89mm, r$\_$5/=5.70mm and r$\_$6/=6.47mm, respectively. The mean fork length at the time of ring-mark formation was calculated to be; l$\_$1/=297.6mm, l$\_$2/= 390.1mm, l$\_$3/=472.2mm, l$\_$4/=545.5mm, l$\_$5/=616.2mm, and l$\_$6/= 683.4mm, respectively.

• Tribology and Lubricants
• /
• v.30 no.5
• /
• pp.256-264
• /
• 2014

Enhancing the value of fine chemicals based on biomass resources is an important objective for addressing environmental and other concerns such as demand for renewable or green products, as well as from the political perspective to reduce dependence on fossil feedstock associated with the use of petroleum-based products. Based on these considerations, we studied the synthesis of estolide using waste plant-based oil materials and their application as lubricants and pour point depressants. Five estolides were prepared by varying molar ratio of palmitic acid (PA) to oleic acid (OA) using a reaction time of 48 h. The estolides were characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR). The isolated yields were in the range of 57-78 % and purity was 93-97%, showing iodine values of 18.2-37.8, total acid numbers (TANs) of 75.6-94.2 mg KOH/g and estolide numbers (ENs) of 1.2-1.8. Increasing the ratio of OA to PA in the synthesis decreased the kinematic viscosity and clouding point of the estolides. Four ball wear test of the estolides as a base oil demonstrated that the wear scar diameter (WSD) of the estolides was significantly lower (0.320-0.495 mm) than the WSD of general base oils such as 150N and Yubase (0.735 and 0.810 mm, respectively), indicating better wear resistance of the estolides. However, the lubricant property was found to be independent of the amount of OA in the estolides. These new materials are prospective candidates for application as a lubricant base oil.

• Korean Journal of Materials Research
• /
• v.8 no.9
• /
• pp.837-842
• /
• 1998

As the size of the integrated circuit is scaled down the importance of Si cleaning has been emphasized. One of the major concerns is abut the removal of metallic impurities such as Cu and Fe on Si surface. In this study, we intentionally contaminated Cu and Fe on the Si wafers and cleaned the wafer by cleaning splits of the chemical mixture of $\textrm{H}_2\textrm{O}_2$ and HF and the combination of HF treatment with UV/$\textrm{O}_3$ treatment. The contamination level was monitored by TXRF. Surface microroughness of the Si wafers was measured by AFM. The Si wafer surface was examined by SEM. AES analysis was carried out to analyze the chemical composition of Cu impurities. The amount of Cu impurities after intentional contamination was abut the level of $\textrm{10}^{14}$ atoms/$\textrm{cm}^2$. The amount of Cu was decreased down to the level of $\textrm{10}^{10}$ atoms/$\textrm{cm}^2$ by cleaning splits. The repeated treatment exhibited better Cu removal efficiency. The surface roughness caused by contamination and removal of Cu was improved by repeated treatment of the cleaning splits. Cu were adsorbed on Si surface not in a thin film type but in a particle type and its diameter was abut 100-400${\AA}$ and its height was 30-100${\AA}$. Cu was contaminated on Si surface by chemical adsorption. In the case of Fe the contamination level was $\textrm{10}^{13}$ atoms/$\textrm{cm}^2$ and showed similar results of above Cu cleaning. Fe was contaminated on Si surface by physical adsorption and as a particle type.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.569-575
• /
• 2020

Recently, research on renewable energy technologies has come into the spotlight due to rising concerns over the depletion of fossil fuels and greenhouse gas emissions. Demand for portable electronic and wearable devices is increasing, and electronic devices are becoming smaller. Energy harvesting is a technology for overcoming limitations such as battery size and usage time. In this paper, the V-I characteristic curve and internal resistance of thermal electric devices were analyzed, and MPPT control methods were compared. The Perturbation and Observation (P&O) control method is economically inefficient because two sensors are required to measure the voltage and current of a Thermoelectric Generator(TEG). Therefore, this paper proposes a new MPPT control method that tracks MPP using only one sensor for the regulation of the output voltage. The proposed MPPT control method uses the relationship between the output voltage of the load and the duty ratio. Control is done by periodically sampling the output voltage of the DC-DC converter to increase or decrease the duty ratio to find the optimal duty ratio and maintain the MPP. A DC-DC converter was designed using a cascaded boost-buck converter, which has a two-switch topology. The proposed MPPT control method was verified by simulations using PSIM, and the results show that a voltage, current, and power of V=4.2 V, I=2.5 A, and P=10.5 W were obtained at the MPP from the V-I characteristic curve of the TEG.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.1-12
• /
• 2017

This paper concerns the structural behavior of high-strength concrete beams with compressive strength of 80 MPa subjected to flexure. Main test variables were nominal yielding strength of longitudinal rebar including normal strength rebar(SD 400) and high strength rebar(SD 600), reinforcement ratio from 0.98 to 1.58% and beam section size with $200{\times}250$, $200{\times}300mm$. The nine beams were cast and tested under flexure. The study investigated ultimate flexural strength, load-deflection relationship, crack patterns, failure patterns and ductility of the test beams. Test results indicate that when rebar ratio increased flexural strength increased and ductility decreased. In addition, the number of cracks increased and the crack width decreased as the reinforcement ratio increased. The yield strength of rebar did not affect significantly load-crack width relationship. Nonlinear analysis of test beams was performed and then test results and analytical results of ultimate load were compared. Analytical results of high-strength concrete beams overall underestimated flexural strength of test beams.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.595-601
• /
• 2014

The microstructures of NATM were examined by SEM, FT-IR spectra, tensile properties, mole % of [NCO/OH], and particle size analyzer. Growing concerns in the environment-friendly industries have led to the development of solvent-free formulations that can be cured. We had synthesized NATM(New Austria Tunnel Method) resin having the ability to protect stainless steel against corrosion. Comparing with general NATM resin and coatings, this resin that synthesized with polyurethane and epoxy was highly stronger in intensity and longer durability. Hybrid resin was composed of polyols, MDI, epoxy, silicone surfactant, catalyst and crosslink agent, and fillers. Moreover, fillers such as fume silica not only accelerated the curing rate but also improved the physical property as thermal barriers. The rigid segments of synthetic resin in mechanical properties were due to fume silica and the increase the mole% of [NCO/OH] for corrosion protection. In conclusion, the hybrid resin microstructure with crosslink agent and fume silica are good material for thermosetting coating of metal substrates such as stainless steel.

• Explosives and Blasting
• /
• v.35 no.3
• /
• pp.31-54
• /
• 2017

In the countries operating nuclear reactors, the development of high-level radioactive waste(HLW) disposal technique is considered as an urgent and important issue for sustainable utilization of nuclear energy. In Korea, in which a low and intermediate radioactive waste repository is already operating, the construction of an underground research laboratory for in situ validation studies became a matter of interest with increasing concerns on the management of HLW. In order to construct and to operate an underground HLW repository safely in deep underground, the stability of rock mass should be guaranteed. As an important factor on rock stability, excavation damaged zone (EDZ) has been studied in many underground research laboratories in foreign countries. For accurate evaluation of the characteristics and effects of EDZ under disposal condition, it is required to use reliable investigation method based on the analysis of previous studies in similar conditions. In this study, status of foreign underground research laboratories in other countries, approaches for investigation the characteristics, size, and effect of EDZ, and major findings from the researches were surveyed and reported. This will help the accomplishment of domestic researches for developing HLW management techniques in underground research laboratory.

• Journal of the Korean Society for Library and Information Science
• /
• v.24
• /
• pp.139-169
• /
• 1993

The major purpose of this study is to scrutinize and analyze various factors in numerous aspects of two different library systems for the visually handicapped, namely braille library and a special section for the visually handicapped in the public library system. The analyses may provide theoretical and conceptual framework on which strategies to enhance services for the visually handicapped is to be developed. More specifically, this study seeks (1) to examine a linkage between the degree of maintenance of staffs, collections, and equipment and the level of satisfactions of librarians and (2) to come up with more effective mechanisms of welfare services for the visually handicapped in each library system. This research is qualitative-descriptive and uses interview method. Fourteen libraries throughout the nation (4 public libraries with a reading room for the visually handicapped and 8 braille libraries) which had been in operation more than one year were selected as subjects for the research. Findings and results of the analyses are summarized as follows : 1. There seems to be general consensus that each of public and braille library has significant but, to a certain extent, different roles to play in order to enhance library services for the visually handicapped. Recruitment of qualified librarians, increase of the volume of collection, and enlargement of reading room space are noted as immediate concerns for the former. For the latter, it was suggested that increase of the number of staff for publishing, securing more equipments for pulication in braille, and wider scope as well as more variety of publications are the pressing problems at hand. 2. Both public and braille library employ one librarian for the visually handicapped who is required to have educational background in library science and special education. In addition, one must have competence in reading braille types. 3. Majority of reading rooms in those libraries is so small in physical aspect that size and number of seats are 66m2 and 15 seats respectively because circulation services are mainly in use due to the problem of inaccessibility which is commonly suffered by the visually handicapped. 4. Library services for the visually handicapped are heavily concentrated upon the large urban area. In fact, most of braille libraries are located in Seoul whereas a reading room for the visually handicapped in the public library system are exclusively placed in the large cities such as Inchon, Taejon, and Taegu. 5. All of the public library is neither equipped with necessary facilities to publish in braille nor secured supporting instruments which may facilitate library use for the visually handicapped. On the contrary, most of braille libraries are equipped with arrangements to publish in braille despite supporting devices are gererally lacking. 6. Consequently, provision of services In the public library is largely confined to reading and circulation of materials purchased from braille libraries while major task of braille libraries centers around publication and distributions of the reading materials in braille.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.7
• /
• pp.17-27
• /
• 2018

Sinkholes have occurred in various places around the world and concerns about public safety have been raised in recent years. Particularly, a ground subsidence may occur due to a variety of conditions when developing underground spaces. Ground subsidence refers to the sinking of the Earth's surface caused by the loss of the soil constituting ground due to a certain artificial cause in the ground. Ground subsidence is induced by artificial causes such as the leakage of water supply/sewage pipes and groundwater disturbance, and it is different from a sinkhole, where the sinking of the Earth's surface is induced by the cavity formed due to the melting of limestone in the ground with limestone bedrock. In recent underground development in the urban areas of Korea, damages to surrounding buildings have frequently led to many difficulties with civil complaints and compensation issues, and the collapse of some buildings has resulted in the loss of lives and property. Accordingly, the central government has legislated the Special Act on Underground Safety Management, which will take effect from January 1, 2018. This law specifies an underground safety management system for securing underground safety, under which underground safety impact assessment is performed for projects involving underground excavation work that exceeds a certain size, and safety inspection is regularly performed for underground facilities and the surrounding ground. In this study, the contents of the special act on underground safety management are reviewed, and the direction of development of underground safety policy for preparing preemptive underground safety management preparation and response system is suggested.

• Clinical and Experimental Pediatrics
• /
• v.61 no.5
• /
• pp.135-149
• /
• 2018

Growth charts are curves or tables that facilitate the visualization of anthropometric parameters, and are widely used as an important indicator when evaluating the growth status of children and adolescents. The latest version of the Korean National Growth Charts released in 2007 has raised concerns regarding the inclusion of data from both breastfed and formula-fed infants, higher body mass index (BMI) values in boys, and smaller 3rd percentile values in height-for-age charts. Thus, new growth charts have been developed to improve the previous version. The 2006 World Health Organization Child Growth Standards, regarded as the standard for breastfed infants and children, were introduced for children aged 0-35 months. For children and adolescents aged 3-18 years, these new growth charts include height-for-age, weight-for-age, BMI-for-age, weight-for-height, and head circumference-for-age charts, and were developed using data obtained in 1997 and 2005. Data sets and exclusion criteria were applied differently for the development of the different growth charts. BMI-for-age charts were adjusted to decrease the 95th percentile values of BMI. Criteria for obesity were simplified and defined as a BMI of ${\geq}95th$ percentile for age and sex. The 3rd percentile values for height-for-age charts were also increased. Additional percentile lines (1st and 99th) and growth charts with standard deviation lines were introduced. 2017 Korean National Growth Charts are recommended for the evaluation of body size and growth of Korean children and adolescents for use in clinics and the public health sector in Korea.