• 한국산학기술학회논문지
• /
• 제10권9호
• /
• pp.2451-2459
• /
• 2009

통증이 거의 없는 새로운 모세혈액 채혈기법인 진공자동채혈법(vacuum assisted auto-lancing)의 정확도를 분석하고자 전형적인 대체부위인 전완(팔) 부위에서 채혈하여 측정한 혈당값을 표준 채혈부위인 정맥 및 손가락에서 채혈하여 측정한 혈당값과 비교, 분석하는 연구를 수행하였다. C대학교병원을 내원한 531명의 환자들을 대상으로 왼손 집게손가락 끝과 왼쪽 전완 부위에서 말초혈액의 혈당을 측정하였고, 곧바로 정맥 채혈하여 혈당을 측정하였다. 전완 부위 혈당 평균값이 손가락보다 정맥 혈당값에 더욱 가까웠으나 이들 간의 차이는 약 10 mg/dL 범위에 불과하여 임상적으로는 동일한 값들로 볼 수 있었다. 측정값들 간에 상관분석을 수행한 결과 손가락과 정맥 채혈의 혈당값 간의 상관계수는 0.94, 전완 부위와 정맥 혈당값 간의 상관계수는 0.92, 또한 전완 부위와 손가락 채혈 간의 상관계수는 0.94로 모두 매우 유의한 상관관계를 보였다(p<0.001). 따라서 대체부위인 전완 부위 혈당검사의 정확도가 실험적으로 입증되었다. 손가락 혈당검사는 상당한 채혈 통증이 수반되어 당뇨 환자들이 자가 검사를 기피하는 주요 원인이 되지만, 전완 부위에서 진공자동채혈하면 통증이 거의 없으므로 만성 당뇨환자들의 자가 질환관리를 위해 매우 유용하리라 기대된다.

• 대한토목학회논문집
• /
• 제44권1호
• /
• pp.85-93
• /
• 2024

안전하고 지속가능한 건설현장의 운영을 위해 소음, 분진, 진동, 온·습도 등의 환경정보 모니터링은 매우 중요하다. 하지만, 상용 센서들은 단가가 상당하고, 건설현장과 같이 가혹한 환경에서 사용하도록 설계되지 않아 쉽게 고장나거나 측정값이 불안정하며, 각 환경정보마다 개별적인 센서를 설치 및 관리해야 하기 때문에 인력/비용/공간의 확보가 어렵다는 한계점이 존재한다. 본 연구는 건설현장의 소음, 분진, 진동, 온·습도 등의 환경정보를 측정하는 통합 센싱모듈을 개발했다. 구체적으로, 설치 비용을 상용 센서의 3.3% 수준으로 낮추고, 야외의 가혹한 환경에서 사용 가능하도록 설계하며, 다수의 센서를 통합하여 설치와 관리가 편리하도록 개선했다. 또한, 건설현장에서 센싱모듈을 효과적으로 사용하기 위해 GPS, LTE, 실시간 센싱(1분 이내)을 지원한다. 센싱모듈을 검증하기 위해 국가 인증 센서와 측정 성능을 비교했고, 데이터 통신을 검증하기 위해 7곳의 현장에 25회 방문하여 테스트를 진행했다. 그 결과, 소음 측정 정확도 97.5% 및 정밀도 99.9%, 분진 측정 정확도 89.7%, 데이터 송신 안정률 93.5% 등 우수한 성능을 확인했다. 본 연구는 현장으로부터 대량 및 양질의 환경정보 데이터를 수집하도록 지원하여 (1) 관련 규정/법령의 준수 여부 평가, (2) 환경정보 시뮬레이션, (3) 환경대책 수립 등 현장 의사결정에 기여한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.139-142
• /
• 2009

The worldwide energy market is enlarging rapidly according to current issues like globalization, deregulation, global warming and strengthening for environmental regulation as well as the energy technology is developing speedily by the add of information and communication techniques. In spite of these advanced techniques in the field of the renewable energy, solar power depends on the governmental aid largely in comparison with other renewable energy sources because of the high initial investment cost. Therefore it is important to investigate scrupulously for the expected erection site of solar power plant from the planning stage. This paper shows actual measurement data of solar radiation of scheduled solar power locations in the waterworks site with consideration of waterworks facilities and regional specialties and presents the data which was analyzed comparably with the radiation data of adjacent locations served by national authorities. In addition, these data were analyzed using RETScreen and used for making decision on the business validity.

• 한국안전학회지
• /
• 제15권4호
• /
• pp.101-111
• /
• 2000

In order to introduce P.S.M. system adequate to domestic construction first, many cases similar to advanced foreign P.S.M. system have been collected and compared to the domestic situation. Then, the current safety management status of bridges, subways, apartment and office building construction are investigated while visiting interview, using questionnaire at site have being done. The potential hazard and measurement have been investigated for each kind of works, and the domestic introducing method of P.S.M. system is analyzed with expert discussion. In order to represent how to make out P.S.M. plan, the questionnaire is made out using each five place for bridge, subways, apartment and office building. As the weight factor for potential hazard of each work obtained from more than forty site places, is produced and shown. Also, a direction the recommendation is suggested to improve tool in each construction site with work schedule. It is thought that proposed schedule contributed to keeping in safe business administration of each company in decreasing many effort at the construction site.

• Journal of Nutrition and Health
• /
• 제25권7호
• /
• pp.628-641
• /
• 1992

To investigate the effects of exercise-training on fat distribution several indicators of body fatness(percent body fat skinfolds thickness body circumference) were assessed in 128 healthy male subjects submitted to an 8-wk high intensive exercise-training. The subjects(average age=20.3$\pm$1.3 yrs) exercised 5 days/week. Daily energy intake and expenditure wee recorded. The results obtained are summarized as follows : 1) Through exercise-training lean body mass increased significantly (changes : 0.5$\pm$1.5kg; p=0.000) decreased significantly. 2) Suprailiac was the most reduced site by exercise-training among eight site skinfolds. Central skinfolds were changed more by exercise-training than peripheral skinfolds with reduction of 1.7$\pm$2.1mm and 0.4$\pm$1.8mm respectively. Central site circumferences were reduced more by exercise-training than peripheral site circumferences. 3) As a result of analyzing 12 of the fattest(top 10% of weight) and 12 of the leanest men(bot-tom 10% of weight) it indicated that there was a significant reduction of fat tissue in body composition and skinfolds thickness for the fat group. However there was no significant change for the lean groups. 4) Correlational analysis showed that predicting changes in body fat by infrared(NIR) measurement seemed to be closely associated with changes in body fat by Kim's equation and Katch's equation in young men.

• 한국측량학회지
• /
• 제28권5호
• /
• pp.547-554
• /
• 2010

본 연구는 생활폐기물매립장의 용적량을 산출함으로써 매립장을 향후 계속하여 언제까지 사용할 수 있는가를 분석한 것이다. 계획용적량을 산출하기 위해서 매립장의 설계 당시의 수지지도 및 계획도 등을 사용하였고, 현재까지의 매립 용적량은 최신의 항공측량장비인 항공 LiDAR 장비를 이용하여 매립량을 측정하였다. 이러한 자료를 바탕으로 현재의 매립 용적량과 지난 수년 간의 반입량, 그리고 그간의 침하량을 산출하였다. 연구 결과, 잉여용적량으로 계산한 대항지역의 매립 가용 년도는 2045년까지로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.287-288
• /
• 2023

The inspection work at construction sites is one of the important supervisory tasks, which involves verifying that the building is being constructed by the numerical values specified in the design drawings. The conventional measuring method for inspection involves using tools or equipment such as rulers directly by the personnel at the site, and it is usually confirmed by vision. Therefore, this study proposes an model to measure numerical values on images of the construction site. Through the case study to measure the installation interval of jack supports, the proposed algorithm was verified the effiect and validity. The results of this study suggest that it can support inspection work even in the office, which may have been overlooked by on-site inspectors, and contribute to the digitization of inspection work at construction sites.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1650-1658
• /
• 2011

The quality control of compaction fills has been commonly performed via the field density measurement and plate load tests. However, the engineer frequently encounters difficulties in actually controling the quality due to the uncertainty in the field density measurement as well as the plate load tests. To overcome these difficulties, Park et al. (2009) proposed an alternative quality control method based on the measurement of the compressive wave velocities. In this study, the compressive wave velocities measured in the full-scale model test site were analyzed. Direct arrive seismic tests were performed after the completion of each trackbed layer. To identify a relationship between elastic wave velocities and degree of compaction, laboratory compaction tests were conducted.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.177-187
• /
• 2001

It is important to test and evaluate the variation degree of ship-mounted antenna radiated power with respect to all directions in order to use more effectively antennas that installed on naval ships. The naval ship has various sensors for navigation, communication and electronic warfare, etc. And the performance of these sensors extremely depends on the various characteristics of antenna system to transmit and receive electromagnetic wave. The radiated power pattern of the antenna differs from all aspect angles of the ship because of complex superstructures. It is important to know the weak point(direction) of antenna radiation for appropriate operation. Therefore, the ARP(Antenna Radiation Pattern) of shipboard antennas is measured for the all aspect angles. The results of ARP measurement are utilized as reference for antenna arrangement of newly-built same class warship. This study also describes the development results for the ARP measurement technique, software design and test procedures to measure the radiation pattern of communication equipment antennas using the fixed test site.

• 한국전자파학회논문지
• /
• 제11권3호
• /
• pp.410-418
• /
• 2000

본 논문에서는 27GHz에서 전파환경별 경로손실을 측정하고, 각 수신지점에서 5분간 측정된 경로손실 데이터의 중앙값, 최대값, 최소값을 선형회귀 모델로 모델링하고 분석하였다. 측정 결과를 살펴볼 때, 밀리미터파 대역 가시경로의 경우에도 도심이나 부심 환경에서는 추가의 경로손실을 고려해야 할 것으로 생각된다.