• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.29.3-29.3
• /
• 2008

1RXS J062518.2+733433. The X-ray data was obtained in April 6, 2006 with the XMM-Newton and the optical data with CCD R filter at the 1m telescope of the Lemonsan observatory in 2005-2006 for 11 nights. This source is classified as a magnetic cataclysmic variable with a spin period of 1187.3 s in the optical region. We determine the spin period to be $1187.26\pm0.11$ s using the X-ray data, which is well consistent with the optical studies. However, we find that the pulse profile of the data (0.2-10 keV) folded at the period is different from the quasi-sinusoidal optical profile and is dependent on the selected X-ray energy bands. The results of period searching with times of extrema will be also presented.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.15-22
• /
• 2000

Long ranged groundwater-level data often have the missing intervals because of the trouble of monitoring systems at the national groundwater monitoring wells. Geostatistical methods are very useful for the supplement of the missing data. Ordinary kriging was applied for the interpolation of the missing groundwater-level data with a smooth sinusoidal variation. Conditional simulation was used for the reproduction of the missing data with high fluctuations. Two geostatistical methods produced the very accurate estimates at the missing intervals and reproduced their original variations. This fact is proved by the cross validation test and graphical method, respectively.

• 전기의세계
• /
• v.30 no.5
• /
• pp.291-296
• /
• 1981

In the paper, in order to get the characteristics of the saccadic and the smooth pursuit movements of the oculomotor systems, a revised stochastic sampled data model suggested by Young et. al. was simulated and analyzed by using the MIMIC language. The results are summerized as follows; (1) The predictability to the sinusoidal inputs increased as the input frequency increased, but at the frequency of 1.0[Hz] the prediction started to decrease. (2) The responses of the system drifted when the system was open-looped. (3) The responses showed the transient state during the first period of the input waves, and then moved into the steady state.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.661-664
• /
• 2000

This paper presents a digital instrument for the power quality analysis in three phase power system where current waveform is non-sinusoidal. It is based on C31 DSP and on a special high-speed data acquisition system. Voltage and current waveforms are acquired and processed by using a simple average power algorithm, The paper also goes on to discuss the performance of an instrument prototype both in terms of accuracy and speed of measurement.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.279-282
• /
• 2003

In this paper, we propose a new high resolution frequency estimator for real sinusoids by using short time data and the AWLS/MFT (Adaptive Weighted Least Squares/ Modulation Function Technique) algorithm. Monte-Carlo simulations verify better performances of the proposed frequency estimator and demonstrate that the proposed AWLS sinusoidal estimator is a high resolution estimator.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.1053-1058
• /
• 1989

This paper presents the preliminary studies on measurements of dynamic torque in the rotating shaft by utilizing the magnetic lattice. The intensity of torque can be detected as the phase differences between two magnetic sinusoidal signals recorded on magnetic tapes wound on the shaft. This research describes, from the data concerning with phase differences including noise, a method of signal processing to estimate the true value of the torque.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.1
• /
• pp.145-151
• /
• 1998

This paper addresses the results of an experimental and analytical research of cylindrical coil spring subjected to dynamic behavior. Transfer functions are presented for both deflection and transmitted force as the output with force as the input. Steady state sinusoidal magnitude ratio and transmittance are plotted along with experimental data. It is shown that dynamic characteristic of cylindrical coil spring must be used to enhance the reability of vibration system dynamic behavior analysis in actuating over some frequency.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.81-89
• /
• 2009

Performance tests on the 3-Dimensional Flow-Structure-Interactions-Measurement System(FSIMS) have been carried out. Experimental data obtained by the FSIMS on a floating cylinder have been used to generate a set of artificial images. Comparisons between the data obtained by the use of the artificial images and those original experimental data have been made. Another set of artificial images have also been generated based on theoretically modulated sinusoidal motions, and comparisons between the data obtained by the use of these artificial images and the theoretical ones have been carried out. It has been verified that the FSIMS has a measurement uncertainty of 0.04-0.06mm/frame for velocity vectors and 0.002-0.01mm for the cylinder's positions.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.453-456
• /
• 1992

A Data-based Covariance Matrix(DCM) is introduced in the Eigenvector(EV) method, among subspace methods of estimating multiple sinusoidal frequencies from finite white noisy measurements. It is shown that the EV with the DCM can obtain the true. frequencies from finite noiseless data Some asymptotic results and further improvement on the DCM are also presented mathematically. Monte-carlo simulations are statistically conducted from the view-points of means and standard deviations in the EV's of DCM and Conventional Covariance Matrix(CCM). Simulations show a great promise for using the DCM, particularly for the cases of short data records, closely spaced frequencies and high signal-to-noise ratios.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.6
• /
• pp.671-682
• /
• 2012

The use of sinusoidal corrugated web girder for the box-type girders and gable steel main frames has recently been increasing very much. The reasons are that the thin web of the girder affords a significant weight reduction compared with rolled beam and welded built-up girder, and that corrugation prevents the buckling failure of the web. Improvements of the automatic fabrication process makes mass production of the corrugated web and unit possible, and applications of this girder have been extended considerably. Thus, the research for the optimum design processer considering the production data is needed practically. For doing this research, we develope the discrete optimum structural design program in consideration of production list data for the research, and the program apply to the single girder under the uniform load and the concentrated load as numerical example. We consider objective function as minimum weight of the girder, and use slenderness ratio, stress of flanges and corrugated web, and the girder deflection as the constraint functions. And also the Genetic Algorithms is adopted to search the global minimum point by using the production list as a discrete design variable. Finally, to verify the optimality of the design, we conduct a comparison of the results of the discrete optimum design with those of the continuous one, and also analyze the characteristics of the optimum cross-section.