• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.335.2-335
• /
• 2002

Non-singular boundary element method (BEM) codes are developed in acoustics application. The BEM code is then used to calculate unknown boundary surface normal displacements and surface pressures from known exterior near field pressures. And then the calculated surface normal displacements and surface pressures are again applied to the BEM in forward in order to calculate reconstructed field pressures. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.306-311
• /
• 2002

Non-singular boundary element method (BEM) codes are developed in acoustics application. The BEM code is then used to calculate unknown boundary surface normal displacements and surface pressures from known exterior near Held pressures. And then the calculated surface normal displacements and surface pressures are again applied to the BEM in forward in order to calculate reconstructed field pressures. The initial exterior near field pressures are very well agreed with the later reconstructed field pressures. Only the same number of boundary surface nodes (1178) are used far the initial exterior pressures which are initially calculated by Finite Element Method (FEM) and BEM. Pseudo-inverse technique is used for the calculation of the unknown boundary surface normal displacements. The structural object is a tuning fork with 128.4 Hz resonant. The boundary element is a quadratic hexahedral element (eight nodes per element).

• The Journal of the Acoustical Society of Korea
• /
• 제22권1E호
• /
• pp.11-18
• /
• 2003

Non-singular boundary element method (BEM) codes are developed in acoustics application. The BEM code is then used to calculate unknown boundary surface normal displacements and surface pressures from known exterior near field pressures. And then the calculated surface normal displacements and surface pressures are again applied to the BEM in forward in order to calculate reconstructed field pressures. The initial exterior near field pressures are very well agreed with the later reconstructed field pressures. Only the same number of boundary surface nodes (1178) are used for the initial exterior pressures which are at first calculated by Finite Element Method (FEM) and BEM. Pseudo-inverse technique is, used for the calculation of the unknown boundary surface normal displacements. The structural object is a tuning fork with 128.4 ㎐ resonant. The boundary element is a quadratic hexahedral element (eight nodes per element).

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제3권2호
• /
• pp.17-28
• /
• 1999

A new procedure of the boundary element method(BEM),say, singular BEM for the potential problems with singularities is presented. To obtain the numerical solution of which asymptotic behavior near the singularities is close to that of the analytic solution, we use particular elements on the boundary segments containing singularities. The Motz problem and the crack problem are taken as the typical examples, and numerical results of these cases show the efficiency of the present method.

• 오토저널
• /
• 제12권2호
• /
• pp.51-58
• /
• 1990

According to the developments of various composite materials, it seems to be very important to evaluate the strength and fracture behavior of composite materials. When the composite material is considered as orthotropic material, the characteristic equation of orthotropic material have complex roots. If characteristic roots are equal, the fundamental solutions of BEM become singular ones. This paper analyse the fundamental solutions of the singular problem of orthotropic material using the analogous method to isotropic material.

• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.35-39
• /
• 2018

This paper deals with the relaxation of singular stresses developed in an epoxy adhesive at high temperature. The interface stresses are analyzed using BEM. The adhesive employed in this study is an epoxy which can be cured at room temperature. The adhesive is assumed to be linearly viscoelastic. First, the distribution of the interface stresses developed in the adhesive layer under the uniform tensile stress has been calculated. The singular stress has been observed near the interface corner. Such singular stresses near the interface corner may cause epoxy layer separated from adherent. Second, the interfacial thermal stress has been investigated. The uniform temperature rise can relieve the stress level developed in the adhesive layer under the external loading, which can be viewed as an advantage of thermal loading. It is also obvious that temperature rise reduces the bonding strength of the adhesive layer. Experimental evaluation is required to assess a trade-off between the advantageous and deleterious effects of temperature.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.179-189
• /
• 1991

본 연구에서는 특성근이 같은 같은 경우의 기본해 유도에서 사용하였던 상사 방법을 이용하여, 균열끝 부근의 응력장과 변위장을 나타내고자 한다. 위의 해석을 바탕으로 개발한 프로그램의 정도에 대하여 검증하고, 이 프로그램을 복합재료 내의 균열 문제에 응용하여 응력확대계수에 관한 자료를 계산하고, 그 유용성을 검토하고자 한다.

• 한국자기학회지
• /
• 제18권6호
• /
• pp.221-224
• /
• 2008

본 논문에서는 함정 선체의 갈바닉 부식 전류에 의해 발생되는 수중 전기장 신호를 경계요소 해석 도구인 FNREMUS 소프트웨어를 이용하여 예측하고, 예측된 신호로부터 함정 전기장 신호 특성을 특이치 분해(singular value decomposition) 방법을 이용하여 등가적으로 다이폴 모델링하는 방법에 대해 기술하고 있다. 제안된 다이폴 모델링 기법은 30 m 심도에서 예측된 경계요소 해석 결과와의 평균 차이 비교 방법을 통해 타당함이 확인되었다. 본 논문에서 제안된 모델링 기법을 이용하면 함정에서의 다양한 심도 변화에 따른 수중 정 전기장 신호 분포 특성 예측 및 분석이 가능하다.

• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.883-890
• /
• 1992

본 연구에서는 Laplace 변환법에 의한 2차원 동적 문제의 경계요소 프로그램 을 작성하고, 간단한 모델을 해석하여 프로르램의 정도 및 그 유용성을 검토하고, 응 용문제로 동적하중을 받는 균열문제의 몇 가지 모델에 대하여 변위 외삽법으로 균열의 파괴 역학적 파라미터인 동적응력확대계수(dynamic stress intensity factor)를 구하 여 결과를 검토하여 보고자 한다.

• Geosystem Engineering
• /
• 제21권6호
• /
• pp.309-317
• /
• 2018

We employ a three-dimensional indirect boundary element method (BEM) to simulate temperature change around an underground liquefied natural gas storage cavern. The indirect BEM (IBEM) uses fictitious heat source strength on boundary elements as basic variables which are solved from equations of boundary conditions and then used to compute the temperature change at other points in the considered problem domain. The IBEM requires evaluation of singular integration for temperature change due to heat conduction from a constant heat source on a planar (triangular) region. The singularity can be eliminated by a semi-analytical integration scheme. However, it is found that the semi-analytical integration scheme yields sharp temperature gradient for points close to vertices of triangle. This affects the accuracy of heat flux, if they are evaluated by finite difference method at these points. This difficulty can be overcome by a combination of using a direct numerical integration for these points and the semi-analytical scheme for other points distance away from the vertices. The IBEM and the hybrid integration scheme have been verified with an analytic solution and then used to the application of the underground storage.