• The Journal of the Acoustical Society of Korea
• /
• v.33 no.5
• /
• pp.300-308
• /
• 2014

Photoacoustic imaging is a useful tool for the diagnosis of atherosclerosis because it is capable of providing anatomical and pathological information at the same time. A photoacoustic signal detector is a pivotal element to achieve high spatial resolution, so that it should have broadband spectrum with a high center frequency. Since a photoacoustic imaging probe is directly inserted into blood vessel to diagnose atherosclerosis, the total size of the photoacoustic signal detector should be less than 1 mm. The main purpose of this paper is to demonstrate that PVDF can be used as an active material for the photoacoustic signal detector with a high frequency and broadband characteristic. The photoacoustic signal detector developed in this study was a single element ultrasound transducer with an aperture of $0.5{\times}0.5mm$ and the total size of 1 mm. In the design stage, the natural focal depth was adjusted for an effective focal area to cover the region of interest, i.e., 1~5 mm in depth. This was because geometrical focusing could not be used due to the small aperture. Through a pulse-echo test, it was ascertained that the developed photoacoustic signal detector has the -6 dB bandwidth ranging between 40.1 and 112.8 MHz and the center frequency of 76.83 MHz.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.1
• /
• pp.5-14
• /
• 2003

Principles of a novel pulse growing method are described. The method realized in the crystal growing on a seed from melts under raw melt feeding provided a more reliable control of the crystallization process when producing large alkali halide crystals. The slow natural convection of the melt in the crucible at a constant melt level is intensified by rotating the crucible, while the crystal rotation favors a more symmetrical distribution of thermal stresses over the crystal cross-section. Optimum rotation parameters for the crucible and crystal have been determined. The spatial position oi the solid/liquid phase interface relatively to the melt surface, heaters and the crucible elements are considered. Basing on that consideration, a novel criterion is stated, that is, the immersion extent of the crystallization front (CF) convex toward the melt. When the crystal grows at a <> CF immersion, the raised CF may tear off from the melt partially or completely due to its weight. This results in avoid formation in the crystal. Experimental data on the radial crystal growth speed are discussed. This speed defines the formation of a gas phase layer at the crystal surface. The layer thickness il a function of time a temperature at specific values of pressure in the furnace and the free melt surface dimensions in the gap between the crystal and crucible wall. Analytical expressions have been derived for the impurity component mass transfer at the steady-state growth stage describing two independent processes, the impurity mass transfer along the <> path and its transit along the <> one. The heater (and thus the melt) temperature variation is inherent in any control system. It has been shown that when random temperature changes occur causing its lowering at a rate exceeding $0.5^{\circ}C/min$, a kind of the CF decoration by foreign impurities or by gas bubbles takes place. Short-term temperature changes at one heater or both result in local (i.e., at the front) redistribution of the preset axial growth speed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.5
• /
• pp.353-362
• /
• 2016

Thermal barrier coating (TBC) is an essential element consisting of a super-alloy base and ceramic coating designed to achieve long operational time under a high temperature and pressure environment. However, the top coat of TBC can be delaminated at certain temperatures with long operation time. As the delamination of TBC is directly related to the blade damage, the coupling status of the TBC should be assured for reliable operation. Conventional studies of nondestructive evaluation have been made for detecting generation of thermally grown oxide (TGO) or qualitatively evaluating delamination in TBC. In this study, the ultrasonic C-scan method was developed to obtain the damage map inside TBC by estimating the delamination in a quantitative way. All specimens were isothermally degraded at $1,100^{\circ}C$ with different time, having different partial delamination area. To detect partial delamination in TBC, the C-scan was performed by a single transducer using pulse-echo method with normal incidence. Partial delamination coefficients of 1 mm to 6 mm were derived by the proportion of the surface reflection signal and flaw signal which were theoretical signals using Rogers-Van Buren and Kim's equations. Using the partial delamination coefficients, the partial delamination maps were obtained. Regardless of the partial delamination coefficient, partial delamination area was increased when degradation time was increased in TBC. In addition, a decrease in partial delamination area in each TBC specimen was observed when the partial delamination coefficient was increased. From the portion of the partial delamination maps, the criterion for delamination was derived.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.2
• /
• pp.117-126
• /
• 2009

Purpose : A numerical method of designing a multiple quantum filter (MQF) is presented for the optimum detection of myo-inositol (mI), an important brain metabolite, by using in vivo proton nuclear magnetic resonance spectroscopy ($^1$-HMRS). Materials and Methods : Starting from the characterization of the metabolite, the filter design includes the optimization of the sequence parameters such as the two echo times (TEs), the mixing time (TM), and the flip angle and offset frequency of the 3rd $90^{\circ}$ pulse which converts multiple quantum coherences (MQCs) back into single quantum coherences (SQCs). The optimized filter was then tested both in phantom and in human brains. Results : The results demonstrate that the proposed MQF can improve the signal-to-background ratio of the target metabolite by a factor of more than three by effectively suppressing the signal from the background metabolites. Conclusion : By incorporating a numerical method into the design of MQFs in $^1$-HMRS the spectral integrity of a target metabolite, in particular, with a complicated spin system can be substantially enhanced.

• Journal of Acupuncture Research
• /
• v.26 no.2
• /
• pp.59-70
• /
• 2009

Objectives : Although CTTH is one of the most common symptom in primary headache, the mechanism and treatment is not definite. The purpose of this study is to research about clinical characteristic and roentgenographic finding of the cervical spine in CTTH to determine relationship between the cervical spine and headache. Methods : This study was carried out on 93 patients with CTTH. By roentgenographic finding, they were classified into four groups - HNP, Spondylosis, Sprain, Normal. Then the HNP group was divided again into two groups - singer type and multiple type. Results: 1. Among 93 patients with CTTH, 69(74.19%) patients had abnormal cervical spine by roentgenographic finding. 2. There were HNP, spondylosis, sprain in abnormal roentgenographic finding. And a great majority of the patients were diagnosed as cervical sprain. 3. There were no significant difference between four groups on sex, weight, height, blood pressure, pulse, respiratory rate. But on ages, the HNP group showed the highest average while the sprain group showed the lowest. 4. The patients in HNP group had more frequent, severe pain, longer onset and higher onset-age than those of the other three group. 5. The patients in Multiple-type HNP group had severe pain, longer pain-duration, longer onset, more pre-symptoms and younger onset-age than those of the Single-type HNP group. Conclusions : A great majority of the patients with CTTH had abnormal cervical spines. Also, we found out that the worse the grade of HNP, heavier the level of headache.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.249-249
• /
• 2009

We have grown large area BSTO($(Ba_{1-x}Sr_x)TiO_3$) thin films (x=0.4) on 2 inch diameter MgO (001) single crystal substrates using a pulse laser deposition(PLD) system. Substrate temperature and oxygen pressure in the deposition chamber, and the laser optics for ablating a target have been controlled to obtain the uniform thickness and preferred orientation of the films. Results of x-ray diffraction and rocking curve analysis revealed that the BSTO films were grown on MgO substrates with a preferred orientation (002), and the full width half maximum of the rocking curve was measured to be 0.86 degree at optimum condition. Roughness of the films have been measured to be $3.42{\AA}$ rms by using atomic force microscopy. We have successfully deposited the large area BSTO thin films of $4000{\AA}$ thickness on 50 mm diameter MgO substrates.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.6
• /
• pp.733-742
• /
• 1998

Background: We have previously reported that not only cGMP but also 8-Br-cGMP or 8-pCPT-cGMP, specific and potent stimulators of cGMP-dependent protein kinase (cGMP-PK), increased basal L-type calcium current $(I_{Ca})$ in rabbit ventricular myocytes. Our findings in rabbit ventricular myocytes were entirely different from the earlier findings in different species, suggesting that the activation of cGMP-PK is involved in the facilitation of $I_{Ca}}$ by cGMP. However, there is no direct evidence that cGMP-PK can stimulate $I_{Ca}}$ in rabbit ventricular myocytes. In this report, we focused on the direct effect of cGMP-PK on $I_{Ca}}$ in rabbit ventricular myocytes. Methods and Results: We isolated single ventricular myocytes of rabbit hearts by using enzymatic dissociation. Regulation of $I_{Ca}}$ by cGMP-PK was investigated in rabbit ventricular myocytes using whole-cell voltage clamp method. $I_{Ca}}$ was elicited by a depolarizing pulse to +10 mV from a holding potential of -40 mV. Extracellular 8-(4-Chlorophenylthio)-guanosine-3',5'-cyclic monophosphate (8-pCPT-cGMP), potent stimulator of cGMP-dependent protein kinase (cGMP-PK), increased basal $I_{Ca}}$. cGMP-PK also increased basal $I_{Ca}}$. The stimulation of basal $I_{Ca}}$ by cGMP-PK required both 8-Br-cGMP in low concentration and intracellular ATP to be present. The stimulation of basal $I_{Ca}}$ by cGMP-PK was blocked by heat inactivation of the cGMP-PK and by bath application of 8-(4-chlorophenylthio)-guanosine-3',5'-cyclic monophosphate, Rp-isomer (Rp-pCPT-cGMP), a phosphodiesterase-resistant cGMP-PK inhibitor. When $I_{Ca}}$ was increased by internal application of cGMP-PK, IBMX resulted in an additional stimulation of $I_{Ca}}$. In the presence of cGMP-PK, already increased $I_{Ca}}$ was potentiated by bath application of isoprenaline or forskolin or intracellular application of cAMP. Conclusions: We present evidence that cGMP-PK stimulated basal $I_{Ca}}$ by a direct phosphorylation of L-type calcium channel or associated regulatory protein in rabbit ventricular myocytes.

• Journal of Life Science
• /
• v.14 no.6 s.67
• /
• pp.1023-1027
• /
• 2004

The RAD3 gene of Saccharomyces cerevisiae is essential for the incision step of UV-induced excision repair. An yeast RAD3 gene has been previously isolated by functional complementation. In order to identify the RAD3 homologous gene from fungus Coprinus cinereus, we have constructed cosmid libraries from electrophoretically separated chromosomes of the C. cinereus. The 13 C. cinereus chromosomes were resolved by pulse-field gel electrophoresis, hybridized with S. cerevisiae RAD3 DNA, and then isolated RAD3 homologous DNA from C. cinereus chromosome. The RAD3 homolog DNA was contained in 3.2 kb DNA fragment. Here, we report the results of characterization of a fungus C. cinereus homolog to the yeast RAD3 gene. Southern blot analysis confirmed that the C. cinereus chromosome contains the RAD3 homolog gene and this gene exists as a single copy in C. cinereus genome. When total RNA isolated from the C. cinereus cells were hybridized with the 3.4 kb PvuII DNA fragment of the S. cerevisiae RAD3 gene, transcripts size of 2.8 kb were detected. In order to investigate whether the increase of the amount of transcripts by DNA damaging agent, transcript levels were examined after treating agents to the cells. The level of transcripts were not increased by untraviolet light (UV). This result indicated that the RAD3 homologous gene is not UV inducible gene. Gene deletion experiments indicate that the HRD3 gene is essential for viability of the cells and DNA repair function. These observations suggest an evolutionary conservation of other protein components with which HRD3 interacts in mediating its DNA repair and viability functions.

• International Journal of Automotive Technology
• /
• v.8 no.4
• /
• pp.437-444
• /
• 2007

This paper experimentally investigates the effects of oxygen-enriched air (OEA) on the running behaviors of an LPG SI engine during both start/warm-up (SW) and hot idling (HI) stages. The experiments were performed on an air-cooled, single-cylinder, 4-stroke, LPG SI engine with an electronic fuel injection system and an electrically-heated oxygen sensor. OEA containing 23% and 25% oxygen (by volume) was supplied for the experiments. The throttle position was fixed at that of idle condition. A fueling strategy was used as following: the fuel injection pulse width (FIPW) in the first cycle of injection was set 5.05 ms, and 2.6 ms in the subsequent cycles till the achieving of closed-loop control. In closed-loop mode, the FIPW was adjusted by the ECU in terms of the oxygen sensor feedback. Instantaneous engine speed, cylinder pressure, engine-out time-resolved HC, CO and NOx emissions and excess air coefficient (EAC) were measured and compared to the intake air baseline (ambient air, 21% oxygen). The results show that during SW stage, with the increase in the oxygen concentration in the intake air, the EAC of the mixture is much closer to the stoichiometric one and more oxygen is made available for oxidation, which results in evidently-improved combustion. The ignition in the first firing cycle starts earlier and peak pressure and maximum heat release rate both notably increase. The maximum engine speed is elevated and HC and CO emissions are reduced considerably. The percent reductions in HC emissions are about 48% and 68% in CO emissions about 52% and 78%; with 23% and 25% OEA, respectively, compared to ambient air. During HI stage, with OEA, the fuel amount per cycle increases due to closed-loop control, the engine speed rises, and speed stability is improved. The HC emissions notably decrease: about 60% and 80% with 23% and 25% OEA, respectively, compared to ambient air. The CO emissions remain at the same low level as with ambient air. During both SW and HI stages, intake air oxygen enrichment causes the delay of spark timing and the increased NOx emissions.

• Childhood Kidney Diseases
• /
• v.19 no.2
• /
• pp.98-104
• /
• 2015

Objective: To find out clinical features and long-term outcomes of idiopathic childhood nephrotic syndrome(NS) patients with late steroid resistance(LSR)/late steroid sensitiveness(LSS). Patients and Methods: A retrospective chart review was performed on 480 patients diagnosed with idiopathic childhood NS at Asan Medical Center Children's Hospital from 1990 to 2013. Twenty-four patients whose responsiveness to steroids changed over a minimum 2 year follow-up period (2-17.5 years) were investigated. All patients had undergone a renal biopsy. Results: Among 480 nephrotic children, 428 (89%) were sensitive to the first steroid course. Of those who initially responded, 11 (2.5%) developed resistance to steroid therapy after relapses. LSR mostly developed between 1 month and 1 year after the initial episode. Six patients showed a minimal change and five showed focal segmental glomerulosclerosis (FSGS). Nine (82%) responded to cyclosporine or methylprednisolone pulse therapy. Of these, two had no further relapse, whereas the other seven experienced several relapses that ranged in length from 1.1 to 13.9 years. Three of the nine who initially responded to immunosuppression went on to experience several changes in steroid responsiveness. Two (18%) with resistance to immunosuppressants, including steroids, eventually progressed to end stage renal disease. Among the 52 patients (11%) who were initially steroid resistant, 13 (23%) were converted to steroid sensitive at relapses. Among these, 9 showed minimal change and 4 showed FSGS. Two had no further relapse and the other 11 responded to steroids on subsequent relapses ranging in length from 1.3 to 9.4 years. All these patients have had no further changes in steroid responsiveness with normal renal function. Conclusions: In this study, 2.5% of initial steroid responders and 25% of initial steroid non-responders changed their responsiveness to steroids at subsequent relapses. Eighteen percent of LSR patients developed end stage renal disease. All of the LSS patients showed preserved normal renal function. Responsiveness to immunosuppressants seemed to be the most important factor determining longterm outcomes in LSR/LSS patients.