• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.184-188
• /
• 1999

Switched Reluctance Motor has doubly salient poles in stator and rotor, windings are wound in just stator and no magnet or windings on the rotor. This configuration is robust mechanically and thermally. The inverter of SRM is more robust than that of induction or brushless DC(BLDC) motor, but still its drive is comparatively expensive for home appliance. To drive the conventional three or four-phase SRM, 6 to 8 power switches are required when asymmetric bridge inverter is employed. Generally, more than 50% of the cost for the SRM drive is allocated to power devices and gate drives. This paper proposed single phase SRM that have both radial and axial air gaps. The stator and rotor were stacked with two types of stampings that have different diameters. This configuration is very effective to increase align inductance(Lmax). The high value of Lmax increases the motor efficiency and power density. The proposed single phase SRM(Claw SRM) can be driven by only two power switches. To show the validity of the proposed idea, the analysis using finite element method(FEM) and experimental works are carried out. The proposed SPSRM can be driven with high efficiency and can be made compactly and inexpensively because of high value of align inductance and less number of switches. For the comparison, we used same stator for three-phase and single phase, and slightly different stator and rotor for proposed single phase SRM(Claw SRM)

• 전기학회논문지
• /
• 제59권2호
• /
• pp.311-317
• /
• 2010

This paper deals with operation characteristics of a written-pole motor (WPM), having that of a permanent magnet (PM) synchronous motor and induction motor at once. The WPM also has a magnet layer on the surface of the rotor and the exciter pole that is a device to make the magnet layer magnetized during the operation. This study, introducing a fundamental structure and operation characteristics of a single-phase WPM, proposes a initial design method. With those ground, a 130W, single-phase WPM that is designed for a home appliance is presented and verified with a performance through the experiment.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권2호
• /
• pp.3-9
• /
• 2012

The paper describes a novel technique for on line parameter identification of three-phase induction motors from a single, run up to speed test. Data is sampled during this test with the normal locked rotor and synchronous speed data captured on the way to reaching the motor's rated speed. Rotor parameter variations with frequency due to skin and proximity effects and other non-linear imperfections such as heating and main flux path saturation are taken into account. This method is ideal for determining and/or verifying parameters used in high performance drives.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 학술대회 논문집 전문대학교육위원
• /
• pp.147-153
• /
• 2006

Voltage unbalance will be generated by the load unbalance operation such as combination operation of single & three phase load and current unbalance will be more severe by the deteriorated voltage quality. Under the these unbalance conditions, all power electronic converters used in different types of electronic systems can increase harmonic disturbances by injecting harmonic currents directly into the feeder grid of three phase 4-wire. Harmonic current may cause torque to decrease. it may also overheat or become noisy and torque oscillation in the rotor can lead to mechanical resonance and vibration. This paper presents a scheme on the characteristics of induction motor under the combination of linear & non-linear loads at the three phase 4-wire power distribution system by the unbalance and harmonic components. It was able to confirm that the number of torque pulsation decreased and torque ripple values increased by the harmonics that reduction was difficult by five harmonics filters at additional driving time of single-phase non-linear load.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.201-204
• /
• 2001

In this paper, a single-phase to three-phase PWM converter topology using six switches only for low cost induction motor drive is proposed. The converter topology is of lower cost than the conventional one, which gives sinusoidal input current, unity power factor, dc output voltage control and bidirectional power flow In addition, the source voltage sensor is eliminated by controlling the deviation between the model current and the system current to be zero. The performance of the proposed converter has been demonstrated through the computer simulation.

• 전력전자학회논문지
• /
• 제1권1호
• /
• pp.20-26
• /
• 1996

The common drive method of the single phase induction motor(SPIM) is to install a start capacitor and a centrifugal switch in series with the auxiliary winding. In this paper, the phase angle voltage sequence controller is proposed to eliminate a start capacitor and a centrifugal switch of SPIM. In comparison with the capacitor start system of SPIM, the proposed control system shows that it contributes to saving the starting current about 57% and to improving of the starting efficiency of SPIM. The proposed starting characteristics of the SPIM is obtained with this strategy through simulation and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.867-869
• /
• 2002

A method for the time step analysis of single phase induction motors is proposed. The unknown variables in differential equations are the currents flowing through rotor bars. They are coupled with the distributed magnetic flux densities in the airgap instead of inductance matrix while applying Kirchhoff's and Faraday's induction laws. Two patterns for magnetic flux densities are necessary. One is given by ideal stator winding distribution. the other is produced by currents flowing a rotor bar with unit magnitude and is calculated by FEM. Formulated set of equations are solved for a simple three phase and single phase example model and the resultant speed torque curve is shown in this paper.

• 대한전기학회논문지
• /
• 제33권4호
• /
• pp.127-133
• /
• 1984

In this paper the performance of a variable-phase thyristor motor combined with a phase splitter and a single-phase tapped induction motor is investigated. The phase splitter consists of a bridge type thyristor switching circuit. The regulating power flow of the phase splitter is obtained from the switching phase difference of thyristor switching sequences. The proper switching performance improves the torque-speed-characteristics of the motor and its operation efficiency. We simplify the motor system th using the tapped windng reactances of the motor as the complementary element of the thyristor phase splitter. We discussed the practicality of this motor system through the analysis of simulation result and the voltage and the current wave forms obtained froms obtained from the experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.631-632
• /
• 2006

This paper is written by research for the transient characteristics of the Single-phase Line-start permanent Magnet. The Single-phase Line-start permanent Magnet is most likely to substitute for Single-phase Induction Motor which is used about many appliance currently, because that has good points. For example, It has a Line-start of ability and a High-efficiency. And it need not power convergence device. The rotor of The Single-phase Line-start permanent Magnet has cage-bar with permanent magnet. This motor is started by cage-bar. When it entered synchronous condition, the rotor is rotated by the permanent magnet. But the design of the permanent magnet is very important, because the breaking torque of the permanent magnet interrupt to start a rotor. Finally, if Flux Barrier is not concerned, we do not get result of our object. Therefore this thesis is concerned about Flux Barrier.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.129-131
• /
• 2007

In this paper, we research improvement in efficiency of single-phase induction motor by adapting the condition of the balanced and quasi-balanced operation. we maintain turns of auxiliary winding of the motor and adjust resistance and reactance. In this condition, resistance value and copper loss are much gloater. Namely, this is the condition only for balancing MMF without consideration of copper loss of stator winding. To make more practical design, therefore, we will perform winding design which is based on balanced operation condition and applies copper loss minimum. The problem of deterioration of starting torque is completed by rotor bar shape design.