• The Journal of Fisheries Business Administration
• /
• v.35 no.2
• /
• pp.1-29
• /
• 2004

This paper aims to understand the points which the Board of Directors of the National Federation of Fisheries Cooperatives System has proposed, and to find some improvement. This Fisheries Cooperatives previously had a single board system operating two small board rooms which became independent within the two sectors of credit and .provision in addition to the existing board of directors. This is a very unique board of directors system which is not found in cooperatives in our country nor in the business world. This change of the board of directors of the Fisheries Cooperatives is ascribed to the reorganization of the system into a completely independent division system, which operates business separately based on each sector as opposed to the previous multiple cooperatives system. However, a plural board of directors system does contribute to the improvement of managerial efficiency by strengthening the self-control of each independent business section, but deepens conflicts between its internal organizations, and brings about a reverse function which might deteriorate both the controlling power of a systematic organization and the coordinating power between sectors. This paper made an analysis of acceptors' attitudes toward the board of directors of the fisheries cooperatives system by regulating all the staff directly related to the operation of the board of directors of the fisheries cooperatives system as a group of acceptors and by selecting one hundred and fifty persons among the staff as a sample. The inquiry into acceptors' attitudes was made using questionaries, and the data for this investigation was processed and analyzed using a statistical method. The contents of this paper are composed of I. an introduction, II. the findings of the questionary investigation, III. the overall opinion for the improvement of the board of directors system, and IV. a summary and conclusion.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.136-144
• /
• 2015

The EEG system can be classified as a wired or wireless device. Each device used for the medical or entertainment purposes. The collected EEG signals from sensor are analyzed using feature extractions. A wireless EEG system provides good portability and convenience, however, it requires a mobile system that has heavy computing power. In this paper a single board system is proposed to handle EEG signal processing for BCI applications. Unfortunately, the computing power of a single board system is limited unlike general desktop systems. Thus, parallel approach using multiple single board systems is investigated. The parallel EEG signal processing system that we built demonstrates superlinear speedup for an EEG signal processing algorithm.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.4
• /
• pp.160-165
• /
• 1996

This paper introduces a sea environmental monitoring system for measuring pH,DO, level and temperature. This system is developed using a personal computer(PC) and multiple single board computers. A PC communicates with the single board computers by awireless communication method and transfers data to another personal computer for processing data by a modem. The values of pH,Do,level and temperature, which are basic components to estimate sea environment, are real-timely processed in the single board computer at each stations, and transferred to the monitoring PC. These data are graphically shown on the PC monitor and logged on the data processing system in the form of file. Using the wire and wireless communication system, user can constantly analyze the acquired data and detect the sea contamination.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1650-1658
• /
• 2019

In recent years, IoT device and platform become widely popular and the computing performance and capabilities of IoT devices are also getting improved. However, the size and computing resources of IoT devices, especially small single board computer, are limited in a way that the design and implementation of the system should be carefully considered to operate on the devices. Recently, SDR technologies are adapting in IoT devices and can perform various radio systems. Thorough analysis and investigation of computer performances on small single board computer are necessary for its usage. In this paper, we present the results of computing resources measurement and analysis on small single-board computers. At first, we consider to design SDR based spectrum sensing for single board computer, investigate various key factors and propose a design procedure that can affect performance of the system with experiments.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.3
• /
• pp.294-300
• /
• 1995

In aquaculture industrial field, an automatic management and control system is needed to cope with the difficulties such as expensive wage, ripe age of management worker and risk according to the unexpected change of environmental conditions in the aquarium. This paper introduces an automatic aquarium monitoring and control system. The system is developed using PC single board computer. A PC can be connected to multi-single hoard computers, and the communication between PC and single board computers is based on RS-422/485 interfacing method. The physical data of pH, DO, temperature and water level etc. are real-timely treated in the single board computer though individual transducers, transfered to the main monitoring PC through RS-422/485 communication, and those data are graphically shown on the PC monitor. Furthermore, the environmental circumstance can be monitored through the image processing system, and the emergency system can be operated under the condition of environmental incident such as electric power stoppage, DO deficiency, pump shut down and low level water etc.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.11
• /
• pp.637-642
• /
• 2000

IEEE 1149.1 boundary scan architecture is used as a standard in board-level system testing. The simplicity of this architecture is an advantage in system testing, but at the same time, it it makes a limitation of applications. Because of several problems such as 3-state net conflicts, or ambiguity issues, interconnect testing for multi-drop multi-board systems is more difficult than that of single board systems. A new approach using IEEE 1149.1 boundary scan architecture for multi-drop multi-board systems is developed in this paper. Adding boundary scan cells on backplane bus lines, each board has a complete scan-chain for interconnect test. This new scan-path insertion method on backplane bus using limited 1149.1 test bus less area overhead and mord efficient than previous approaches.

• The Journal of KAIRB
• /
• v.2 no.1
• /
• pp.6-22
• /
• 2020

Purpose: Clinical studies require institutional review board (IRB) approval based on the ethical principle and regulations. While the number of clinical studies has been increased and diversified, duplicated IRB review for multi-center studies has become a major issue. Therefore, single IRB system has been suggested in revised Common Rule. This study aimed to identify and assess the current status of single IRB in Korea and the anticipated needs of single IRB from researchers and IRB member or administrators. Methods: We developed 14 questions including perceived advantages and disadvantages of single IRB, and anticipated problems. The online survey collected opinions on single IRB from researchers, IRB members and IRB administrators. We also interviewed five IRB administrators who have an experience of single IRB. Results: A total of 80 responses were analyzed in this study. Although efficiencies were suggested for the advantages of single IRB in terms of reducing burden of duplicated review, respondents also perceived that the different review criteria between single IRB and each IRB would be a major hurdle for adopting single IRB system. Therefore, the standardization of standard of procedures (SOP) and the standardization of IRB submission materials should be preceded. According to the small group experiences of single IRB in Korea, we also observed the similar anticipated problems of single IRB. Conclusion: Single IRB system has many advantages for conducting multi-center trial. However, many specialists still have a lot of concerns about introducing a single IRB system in Korea. Therefore, a gradual, step-by-step process for conducting a single IRB system in Korea will be needed. Many studies for improving currently suggested single IRB system and the improvement of awareness about the essential of single IRB system would be needed.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.293-295
• /
• 2004

The Engineering Model of on-board computer was developed and tested completely with other sub-systems for STSAT-2. We designed the on-board computer of STSAT-2 which has some improved features compared with that of STSAT-l. A remarkable change is that the on-board computer has a structure of centeralized network communication without a Network Controller of the STSAT-l. That is, the on-board computer directly manages a satellite network. In addition, as many logics are implemented by Field Programmable Gate Array, so we can reduce the weight and size of on-board computer. Also, the developed on-board computer has more improved tolerance against Single Event Upsets and faults than that of the STSAT-l.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.122-122
• /
• 2001

In this research, an Electronic White Board Control System is developed that stores and prints the data written on the white board. This control system is constructed using an embedded single board PC, whose function is the acquisition(from CCD image sensor system), processing and storing of the data on the screen. The properties of this system are as follows: 1. The system is able to move the screen on the right and left. 2. The system is able to output the data written on the screen to a connected printer. 3. The system is controlled by an external remote PC connected to the system by serial line as well as by the keys on the control panel. The data written on the screen can be sent to the external PC and then can be modified and stored...

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.7
• /
• pp.21-32
• /
• 2024

Since leather shoes cannot be washed with water, there is a need for a cleaning method that can remove extraneous substance from the inside and outside of shoes and senitize the inside of shoes without using water. For this purpose, this paper develops a shoes cleaning machine control system that automatically controls the entire process of shoes cleaning in a shoes cleaning machine that quickly cleans the inside and outside of shoes using compressed air, sterilization solution. The developed system uses Rasberry Pi, a general purpose single board computer(SBC), to control various actuators of the shoes cleaning machine. The shoes cleaning machine operated by the developed system shows a sterilization efficiency of more than 99% and an odor removal efficiency of more than 86% in a cleaning time of less than 1 minute.