• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.478-480
• /
• 2002

Heating by RF wave is divided into dielectric heating and induction heating. Dielectric heating and induction heating from outside the body have the compensatory heating pattern. While surface fat layer is heated by dielectric heating, it is not heated by induction heating. While the peripheral part at the middle of the electrodes is not heated by dielectric heating, it is heated by induction heating. By the simultaneous application both modalities, heating pattern seems to be more uniform and improved. Computer simulation of Finite Element Method (FEM) using ANSYS was conducted to dielectric heating with the results of above-mentioned feature. Theoretical considerations by the uniform RF magnetic field in a cylinder and textbooks support the feature of the above-mentioned heating pattern of induction heating. Further computer simulation of FEM using ANSYS will be conducted to simultaneous application of dielectric heating and induction heating to verify and will be reported.

• 한국정밀공학회지
• /
• 제32권6호
• /
• pp.563-570
• /
• 2015

In this paper, Finite Element Analysis (FEA) for gear heat treatment using simultaneous dual frequency (SDF) induction heating is conducted. To do this, thermal-electromagnetic coupled FE model is built. A two dimensional FE model of gear and heater is introduced to reduce computation time. For more time-efficient analysis, harmonic analysis for electromagnetic model is adopted and transient analysis model, for heat transfer model. Through the coupled analysis, it can be found that the proposed FE model can solve for SDF induction heating of gear and heat treatment parameters can also be determined.

• Wind and Structures
• /
• 제19권1호
• /
• pp.35-58
• /
• 2014

A numerical simultaneous solution involving a linear elastic model was applied to study the fluid-structure interaction (FSI) of membrane structures under wind actions, i.e., formulating the fluid-structure system with a single equation system and solving it simultaneously. The linear elastic model was applied to managing the data transfer at the fluid and structure interface. The monolithic equation of the FSI system was formulated by means of variational forms of equations for the fluid, structure and linear elastic model, and was solved by the Newton-Raphson method. Computation procedures of the proposed simultaneous solution are presented. It was applied to computation of flow around an elastic cylinder and a typical FSI problem to verify the validity and accuracy of the method. Then fluid-structure interaction analyses of a saddle membrane structure under wind actions for three typical cases were performed with the method. Wind pressure, wind-induced responses, displacement power spectra, aerodynamic damping and added mass of the membrane structure were computed and analyzed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1626-1632
• /
• 2007

Power Car PC1 and PC2 of Korean high speed train have a auxiliary block which consists of two PWM converter respectively. If a auxiliary block happens a critical failure, the other supplies power to full load of train. In this case, a stability of auxiliary block reduces by a increasing load. For increasing a stability of auxiliary block and train system, a auxiliary block consists of two group four PWM converter which operates simultaneously. If a group of a auxiliary block happens a critical failure, the other supplies power to load of a auxiliary block. This paper describes a method for simultaneous movement of auxiliary block which consists of two group four PWM converter.

• The Plant Pathology Journal
• /
• 제22권2호
• /
• pp.164-167
• /
• 2006

An immunocapture reverse transcription-polymerase chain reaction (IC/RT-PCR) was developed for simultaneous detection of two pepper-infecting RNA viruses, Pepper mud mottle virus (PMMoV) and Tobacco mild green mosaic virus (TMGMV). The assay could be performed in a single tube for simultaneous and sensitive detection of these tobamoviruses. This detection system revealed thousand-fold increase in detection sensitivity compare to ELISA. This method could save time and reagent cost compare to common RT-PCR which needs several reactions and several procedures of viral RNA extractions for the same number of samples.

• 한국환경보건학회지
• /
• 제22권3호
• /
• pp.88-97
• /
• 1996

This study was conducted to investigate the antitoxic effects of Pine Leaf extracts against cadmium toxicity. The experimental rats were divided into 5 groups, such as control group cadmium alone treatment group and simultaneous treatment groups of cadmium and three doses of Pine Leaf extracts. Each group was administered with different dose of Pine Leaf extracts such as 0.5 mg, 2.5 mg, 5.0 mg/kg wet weight in pallets for 12 weeks. Cadmium Chloride($CdCl_2$) was administered by 4 mg/kg body weight. The results were summarized as follows: The simultaneous administration of cadmium and Pine Leaf significantly more decreased cadmium concentration in liver tissues compared to the administration of cadmium only. When blood were measured, no significantly difference in haemoglobin, haematocrit, erythrocyte values compared to the administration of cadmium only, but RBC significantly more increased. The simultaneous administration of cadmium and Pine Leaf more no sigmificantly difference metallothionein concentration in liver than the administration of cadmium only. There were showed the histopathological slight changes in the liver and kidney tissues of rats.

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권1호
• /
• pp.84-88
• /
• 2002

The resistive fault current limiter (SFCL) is a very attractive device for power networks. But it has a serious Problem in using YBCO films for fault current limiter is inhomogeneities caused by imperpect manufacturing. So simultaneous quenches are a difficult problem which elements for current limiting are connected in series for increasing voltage ratings. We investigated extended electric field-current characteristics for current limiting element of YBCO film when O-130mT magnetic field is applied. And quench characteristics were investigated in over all element and between elements of YBCO films. From the experiments, it was shown that applied magnetic fields using solenoid coil induced uniform quench distribution for over all stripes and simultaneous quench in all elements for current limiting of YBCO film was realized. We have achieved resistive fault current limiter of 1.2kV/20A rating using magnetic field.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
• /
• pp.91-94
• /
• 2000

We fabricated resistive super- conducting fault current limiters (SFCL) based on YBCO thin films grown on 2" diameter $Al_{2}O_{3}$ substrates. Two SFCLs with nearly identical properties. two SFCLs with nearly identical properties were connected in series to investigate simultaneous quenching. There was a difference of several half cycles in their quench starting time, although the difference was not more than 0.1 msec when they were operated separately. This imbalance was removed by connecting a shunt resistor to an SFCL in parallel. Increased power input at high voltages also reduced the initial imbalance in power dissipation. Further efforts on the simultaneous quench in SFCLs connected in series are on the way through methods such as the artificial control of quench speed.peed.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권1호
• /
• pp.32-39
• /
• 2000

Simultaneous isomerisation and fermentation (SIF) of xylose and simultaneous isomerisation and cofermentation (SICF) of glucose-xylose mixture was carried out by the yeast Saccharomyces cerevisiae in the presence of a compatible xylose isomerase. The enzyme converted xylose to xylulose and S. cerevisiae fermented xylulose, along with glucose, to ethanol at pH 5.0 and $30^{\circ}C$. This compatible xylose isomerase from Candida boidinii, having an optimum pH and temperature range of 4.5-5.0 and $30-35^{\circ}C$ respectively, was partially purified and immobilized on an inexpensive, inert and easily available support, hen egg shell. An immobilized xylose isomerase loading of 4.5 IU/(g initial xylose) was optimum for SIF of xylose as well as SICF of glucose-xylose mixture to ethanol by S. cerevisiae. The SICF of 30 g/L glucose and 70 g xylose/L gave an ethanol concentration of 22.3 g/L with yield of 0.36 g/(g sugar consumed) and xylose conversion efficiency of $42.8\%$.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1093-1098
• /
• 2004

This paper presents a close-loop feedback control scheme, which can simultaneously satisfy multiple conflicting control performances, for a high speed positioning system driven by a brushless D.C. motor. With the dynamic model of the motor and proportional-plus-derivative feedback controllers selected as sample controllers, the convex combined feedback controller is formulated for implementing a direct-drive manipulator. Experimental results show that the developed multiple simultaneous specification(MSS) controller can meet desired control performances; maximum overshoot and rise time.