• 한국멀티미디어학회논문지
• /
• 제15권12호
• /
• pp.1485-1491
• /
• 2012

In this paper, we address the problem of fast handover support for future internet networks. The current mobility support protocols, for example Proxy Mobile IPv6, follow a centralized architecture in which a mobility controller is used to manage intra-network handovers that gives rise to high handover latency. To handle this problem, we propose a novel distributed mobility control architecture in which gateways in the network can exchange user information with neighbour gateways to support intra-network handovers, the mobility controller is only needed in case of inter-network handovers. Simulation results show that our architecture reduce approximately 20% intra-network handover latency than Proxy Mobile IPv6.

• 한국항해항만학회지
• /
• 제37권1호
• /
• pp.55-61
• /
• 2013

In this paper, ship accidents are analyzed briefly and the main objective is to investigate a potential technological approach for risk assessment of vessel stability. Ship nonlinear motion equation and main parameters that induce ship capsizing in beam seas have analyzed, the survival probability of a ferry in random status have estimated and finally find out a risk assessment concept for ship's intact stability estimation by safe basin simulation method. Since a few main parameters are considered in the paper, it is expected to be more accurately for estimating ship survival probability when considering ship rolling initial condition and all other impact parameters in the future research.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.155-160
• /
• 2008

Recently, curtainwall is built according to expand residential-commercial complex and high-raised buildings in residential buildings. It is that curtainwall has advantage to provide for the building occupants a connection between indoor spaces and the outdoors through the introduction of daylight and views into the regularly occupied areas of the building. These buildings also make a result increasing the amount used energy in domestic residence. Therefore, Aims of this study is to suggest advanced design through analysis of daylight, energy and envelope elements in GBCC and glazing simulation depended on case studies.

• 전자공학회논문지A
• /
• 제33A권12호
• /
• pp.110-119
• /
• 1996

A novel high speed VLSI architecture and its VLSI realization methodologies for a motion estimation processor based on full search block matching algorithm are presentd. The presented architecture is designed in order to be suitable for highly parallel and pipelined processing with identical PE's and adjustable in performance and hardware amount according to various application areas. Also, the throughput is maximized by enhancing PE utilization up to 100% and the chip pin count is reduced by reusing image data with embedded image memories. Also, the uniform and identical data processing structure of PE's eases VLSI implementation and the clock rate of external I/O data can be made slower compared to internal clock rate to resolve I/O bottleneck problem. The logic and spice simulation results of the proposed architecture are presented. The performances of the proposed architecture are evaluated and compared with other architectures. Finally, the chip layout is shown.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.540-544
• /
• 2001

This paper addresses a hybrid control architecture for the hospital service robot, SmartHelper. In hybrid architecture, the deliberation takes place at planning layer while the reaction is dealt through the parallel execution of operations. Hence, the system presents both a hierarchical and an heterarchical decomposition, being able to show a predictable response while keeping rapid reactivity to the dynamic environment. The deliberative controller accomplishes four functions which are path generation, selection of navigation way, command and monitoring. The reactive controller uses fuzzy and potential field method for robot navigation. Through simulation under a virtual environment IGRIP, the effectiveness of the hybrid architecture is verified.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권3호
• /
• pp.259-262
• /
• 2013

Multi-site testing is considered as a solution to reduce test costs. This paper presents a new channel sharing architecture that enables I/O pins to share automatic test equipment (ATE) channels using simple circuitry such as tri-state buffers, AND gates, and multiple-input signature registers (MISR). The main advantage of the proposed architecture is that it is implemented on probe cards and does not require any additional circuitry on a target device under test (DUT). In addition, the proposed architecture can perform DC parametric testing of the DUT such as leakage testing, even if the different DUTs share the same ATE channels. The simulation results show that the proposed architecture is very efficient and is applicable to both wafer testing and package testing.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.87-92
• /
• 2010

In this paper, we suggest a PLCS-based architecture and operation method for providing interoperability in SBA integrated collaborative environment. Specifically, the suggested architecture is based on the distributed collaborative environment which employes the PLCS application protocol and integrated repository for representing and sharing product data information between collaborators remotely located. As an example of data representation, a military vehicle system is considered and two kinds of information, including state and activity/process, are explained. We expect that the suggested architecture can be used as a reference model to develop an efficient SBA integrated collaborative environment.

• 디지털산업정보학회논문지
• /
• 제10권3호
• /
• pp.171-179
• /
• 2014

Among the P2P based multimedia streaming architecture, multiple chain architecture has advantage in adapting to dynamically changing network topology simply and rapidly, so this architecture is used for UCC broadcasting system. In UCC broadcasting system, general peer involved in DSLAM becomes UCC server rather than broadcasting system that transfers data from ISP servers. Therefore UCC data generated from UCC server peers is transmitted to peers through DSLAM, and this transmission uses uplink bandwidth of DSLAM. In this paper, I propose an efficient management method of DSLAM uplink bandwidths through negotiating tracker and UCC server peer or head peers of DSLAM. I propose the method that tracker restricts a bitrate of uplink stream of UCC servers when used uplink bandwidth of DSLAM exceeds a certain point of maximum uplink bandwidths. I will show the improved performance of proposed scheme rather than general method with respect to the uplink bandwidth of DSLAM by numerical analysis and simulation.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.80-90
• /
• 2006

The influence of waves on the dynamic properties of bending moments at the root of blades of tidal stream vertical axis rotors is reported. Blade theory for wind turbine is combined with linear wave theory and used to analyse this influence. Experiments were carried out to validate the simulation and the comparison shows the usefulness of the theory in predicting the bending moments. The mathematical model is then used to study the importance of waves for the fatigue design of the blade-hub connection.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.549-549
• /
• 2000

In the previous work, we dealt with a traffic analysis of network-based control system and its architecture using the CAN protocol. It is difficult to determine an optimal network architecture for a specific system. In this paper, we propose the architecture of network-based control system applicable to a specific AGV system with manipulator arms. We define the fixed number of periodic messages to be occurred in this system. In the proposed system architecture, we analyse its traffic for the real-time communication of all messages, determine the optimal sampling period of an analog sensor to be satisfied with the required specification and the number of possible sensors to be added through simulation.