• Geomechanics and Engineering
• /
• 제7권5호
• /
• pp.495-524
• /
• 2014

To investigate the soil-pile interactive performance under lateral loads, a set of laboratory model tests was conducted on remoulded test bed of soft clay and medium dense sand. Then, a simplified boundary element analysis had been carried out assuming floating pile. In case of soft clay, it has been observed that lateral loads on piles can initiate the formation of a gap, soil heave and the tension crack in the vicinity of the soil surface and the interface, whereas in medium dense sand, a semi-elliptical depression zone can develop. Comparison of test and boundary element results indicates the accuracy of the solution developed. However, in the boundary element analysis, the possible shear stresses likely to be developed at the interface are ignored in order to simplify the existing complex equations. Moreover, it is unable to capture the influence of base restraint in case of a socketed pile. To bridge up this gap and to study the influence of the initial stress state and interface parameters, a field based case-study of laterally-loaded pile in layered soil with socketed tip is explored and modelled using the finite element method. The results of the model have been verified against known field measurements from a case-study. Parametric studies have been conducted to investigate the influence of the coefficient of lateral earth pressure and the interface strength reduction factor on the results of the model.

• 대한지하수환경학회지
• /
• 제6권1호
• /
• pp.42-47
• /
• 1999

층간 교차유동이 일어나는 다층 대수층에 존재하는 부분 관통정에서의 유사정상상태 유동에 대하여 연구하였다. 본 논문에서는 부분관통에 의해 발생하는 압력 감소를 나타내는 유사표피인자를 계산할 수 있는 간단한 해법을 제시하였다. 이 해법은 기존에 제시되었던 방법들이 가진 기하학적 또는 계산시간 상의 한계성을 극복한 것이다. 본 계산을 위하여 폐쇄 대수층에서의 장기 압력 거동을 나타내는 간략화된 유사정상상태 확산방정식을 방사형 시스템에 적용하고 그 해를 이용하였다. 다양한 형태의 원통좌표계 시스템에서 본 해법의 적용성을 검토하고 그 결과를 그래프로 제시하였다. 기존의 결과와 비교해볼 때 본 해법을 이용할 경우 최소의 계산량으로 매우 정확한 유사표피인자 값을 계산할 수 있음을 나타내었다. 특히 본 해법은 기하학적으로 복잡한 시스템에 매우 유용함을 보여주었다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.904-913
• /
• 2005

This paper deals with an integrated problem of inventory control and dynamic pricing strategies for a commodity with price and sales-period dependent demand pattern, where a seller and customers have complete information of each other. The problem consists of two parts; one is each buyer's benefit problem which makes the best decision on price and time for buyer to purchase items, and the other one is a seller's profit problem which decides an optimal sales strategy concerned with inventory control and discount schedule. The seller's profit function consists of sales revenue and inventory holding cost functions. The two parts are closely related into each other with some related variables, so that any existing general solution methods can not be applied. Therefore, a simplified model with single seller and two customers in considered first, where demand for multiple units is allowed to each customer within a time limit. Therewith, the model is generalized for a n-customer-classes problem. To solve the proposed n-customer-set problem, a dynamic programming algorithm is derived. In the proposed dynamic programming algorithm, an intermediate profit function is used, which is computed in case of a fixed initial inventory level and then adjusted in searching for an optimal inventory level. This leads to an optimal sales strategy for a seller, which can derive an optimal decision on both an initial inventory level and a discount schedule, in $O(n^2)$ time. This result can be used for some extended problems with a small customer set and a short selling period, including sales strategy for department stores, Dutch auction for items with heavy holding cost, open tender of materials, quantity-limited sales, and cooperative buying in the on/off markets.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1455-1468
• /
• 2016

This paper presents a grid-connected dual stator-winding induction generator (DWIG) wind power system suitable for wide wind speed ranges. The parallel connection via a unidirectional diode between dc buses of both stator-winding sides is employed in this DWIG system, which can output a high dc voltage over wide wind speed ranges. Grid-connected inverters (GCIs) do not require booster converters; hence, the efficiency of wind energy utilization increases, and the hardware topology and control strategy of GCIs are simplified. In view of the particularities of the parallel topology and the adopted generator control strategy, we propose a novel excitation-capacitor optimization solution to reduce the volume and weight of the static excitation controller. When this excitation-capacitor optimization is carried out, the maximum power tracking problem is also considered. All the problems are resolved with the combined control of the DWIG and GCI. Experimental results on the platform of a 37 kW/600 V prototype show that the proposed DWIG wind power system can output a constant dc voltage over wide rotor speed ranges for grid-connected operations and that the proposed excitation optimization scheme is effective.

• Korea-Australia Rheology Journal
• /
• 제14권1호
• /
• pp.33-45
• /
• 2002

Recent results obtained for the port-pom model and the constitutive equations with time-strain separability are examined. The time-strain separability in viscoelastic systems Is not a rule derived from fundamental principles but merely a hypothesis based on experimental phenomena, stress relaxation at long times. The violation of separability in the short-time response just after a step strain is also well understood (Archer, 1999). In constitutive modeling, time-strain separability has been extensively employed because of its theoretical simplicity and practical convenience. Here we present a simple analysis that verifies this hypothesis inevitably incurs mathematical inconsistency in the viewpoint of stability. Employing an asymptotic analysis, we show that both differential and integral constitutive equations based on time-strain separability are either Hadamard-type unstable or dissipative unstable. The conclusion drawn in this study is shown to be applicable to the Doi-Edwards model (with independent alignment approximation). Hence, the Hadamardtype instability of the Doi-Edwards model results from the time-strain separability in its formulation, and its remedy may lie in the transition mechanism from Rouse to reptational relaxation supposed by Doi and Edwards. Recently in order to describe the complex rheological behavior of polymer melts with long side branches like low density polyethylene, new constitutive equations called the port-pom equations have been derived in the integral/differential form and also in the simplifled differential type by McLeish and carson on the basis of the reptation dynamics with simplifled branch structure taken into account. In this study mathematical stability analysis under short and high frequency wave disturbances has been performed for these constitutive equations. It is proved that the differential model is globally Hadamard stable, and the integral model seems stable, as long as the orientation tensor remains positive definite or the smooth strain history in the flow is previously given. However cautious attention has to be paid when one employs the simplified version of the constitutive equations without arm withdrawal, since neglecting the arm withdrawal immediately yields Hadamard instability. In the flow regime of creep shear flow where the applied constant shear stress exceeds the maximum achievable value in the steady flow curves, the constitutive equations exhibit severe instability that the solution possesses strong discontinuity at the moment of change of chain dynamics mechanisms.

• 한국항공우주학회지
• /
• 제45권11호
• /
• pp.932-938
• /
• 2017

플라자마의 거동을 오일러리안 격자와 라그랑지안 입자를 혼합하여 해석하는 Particle-in-cell 기법을 적용하여 간략화된 홀추력기를 해석하였다. 본 연구는 중성입자, 이온입자 뿐만 아니라 전자도 라그랑지안 기법으로 개별추적 계산하기 때문에 message passing interface 기법을 이용해 대용량 계산이 가능한 병렬클러스터링을 적용하였다. 계산에 앞서 일정한 벡터의 자기장에서 전자군의 나선형 거동을 해석하였고, 절대해와 일치함을 확인하여 코드를 검증하였다. 실린더 내부에 반경방향으로 일정한 자기장과 축방향으로 일정한 전기장을 고정시켜 플라즈마의 거동을 PIC 모델을 이용하여 해석하였다. 반응 실린더 내부에 전자가 로렌츠 힘에 의해 이중나선을 그리며 구속되는 현상이 잘 포착되었고, 고속 회전하는 전자와 주입된 중성입자가 충돌하여 이온화 되었고, 대전된 입자가 축방향의 전기장에 의해 급 가속하는 현상 또한 잘 모사되어 플라즈마의 플룸 거동을 모사하였다.

• 공업화학
• /
• 제9권7호
• /
• pp.974-978
• /
• 1998

회분식 통풍관형(DTB) 냉각 결정화기에서 3-nitro-1,2,4,-triazol-5-one(NTO)의 결정화 메카니즘에 관한 연구가 수행되었다. 결정성장속도 및 핵생성속도에 대한 과포화 의존성이 조사되었다. 핵생성 메카니즘 판별을 위한 Mersmann 이론을 이용하여 NTO의 핵생성 거동에 대한 메카니즘이 파악되었다. DTB 결정화기에서 NTO의 핵생성 거동은 불균일핵생성과 표면핵생성이 동시에 기여함을 알 수 있었다. 핵생성속도는 과포화에 4.2승에 비례하였고 결정성장속도는 과포화의 2.9승에 비례하였다. 회분식 DTB 냉각 결정화에서 얻은 NTO 결정의 크기는 결정화 메카니즘으로부터 얻어진 상관식으로부터 검증되었다.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.75-83
• /
• 2004

Ice rubble pieces broken by the bow impact load and side hull of an icebreaking vessel usually pass along the ship's bottom hull and may hit the propeller/rudder or other stern structures causing serious damage to ship's hull . Therefore it is important to estimate the size of broken ice pieces during the icebreaking process. The dynamic interaction process of icebreaker with infinite ice sheet is simplified as a wedge type beam of finite length supported by elastic foundation. The wedge type ice beam is leaded with vertical impact forces due to the inclined bow stem of icebreaking vessels. The numerical model provides locations of maximum dynamic bending moment where extreme tensile stress arises and also possible fracture occurs. The model can predict a failure length of broken ice sheet given design parameters. The results are compared to Nevel(1961)'s analytical solution for static load and observed pattern of ice sheet failure onboard an icebreaker. Also by comparing computed failure length with the characteristic length, the meaning of ice rubble sizes is discussed.

• 한국세라믹학회지
• /
• 제54권1호
• /
• pp.49-54
• /
• 2017

In this study, based on hydrolysis and condensation via $St{\ddot{o}}ber$ process of sol-gel method, synthesis of mono-dispersed silica nanoparticles was carried out with hydrophilic solvent. This operation was expected to be a more simplified process than that with organic solvent. Based on the sol-gel method, which involves simply controlling the particle size, the particle size of the synthesized silica specimens were ranged from 30 to 300 nm by controlling the composition of tetraethylorthosilicate (TEOS), DI water and ammonia solution, and by varying the stirring speeds while maintaining a fixed amount of ethanol. Increasing the content of DI water and decreasing the content of ammonia caused the particle size to decrease, while controlling the stirring speed at a high level of RPMs enabled a decrease of the particle size. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) were utilized to investigate the success factors for synthesizing process; Field emission scanning electron microscopy (FE-SEM) was used to study the effects of the size and morphology of the synthesized particles. To analyze the dispersion properties, zeta potential and particle size distribution (PSD) analyses were utilized.

• 대한토목학회논문집
• /
• 제7권3호
• /
• pp.89-98
• /
• 1987

하천(河川)에서의 오염물(汚染物) 확산이송현상(擴散移送現象)을 수치기법(數値技法)인 유한요소법(有限要素法)을 이용(利用)하여 종(從) 모방향성(模方向性)이 고려된 2차원(次元)으로 해석(解析)하였다. Galerkin의 가중잔차(加重殘差) 유한요소법(有限要素法)이 적용(適用)되었고, 모형보간함수(模形補間函數)와 삼각형요소(三角形要素)가 이용(利用)되었다. 모형(模型)의 타당성(妥當性)을 입증하기 위해 단순화(單純化)된 수로(水路)에서 검정(檢定)한 결과(結果), 계산(計算)된 수치해(數値解)가 정확해(正確解)와 거의 일치(一致)하는 만족(滿足)스러운 결과(結果)가 도출(導出)되었으며, 실제적용(實際適用)은 개발사업후(開發事業後)의 한강본류(漢江本流) 9km 구간(區間)에서 시도(試圖)하여 탄천(炭川)과 중랑천(中浪川)의 지류(支流) 영향을 받는 BOD농도분포(濃度分布)가 2차원적(次元的)으로 도시(圖示)되어 1차원모형(次元模型)에 의(依)한 분포(分布)보다 실상황(實狀況)을 더욱 잘 모의(模擬)하고 있다.