• Steel and Composite Structures
• /
• 제38권4호
• /
• pp.415-430
• /
• 2021

The effective flange width was usually introduced into elementary beam theory to consider the shear lag effect in steel-concrete composite beams. Previous studies have primarily focused on the effective width under positive moments and elastic loading, whereas it is still not clear for negative moment cases in the normal service stages. To account for this problem, this paper proposed simplified formulas for the effective flange width and reinforcement stress of composite beams under negative moments in service stages. First, a 10-degree-of-freedom (DOF) fiber beam element considering the shear lag effect and interfacial slip effect was proposed, and a computational procedure was developed in the OpenSees software. The accuracy and applicability of the proposed model were verified through comparisons with experimental results. Second, a method was proposed for determining the effective width of composite beams under negative moments based on reinforcement stress. Employing the proposed model, the simplified formulas were proposed via numerical fitting for cases under uniform loading and centralized loading at the mid-span. Finally, based on the proposed formulas, a simplified calculation method for the reinforcement stress in service stages was established. Comparisons were made between the proposed formulas and design code. The results showed that the design code method greatly underestimated the contribution of concrete under negative moments, leading to notable overestimations in the reinforcement stress and crack width.

• 한국수자원학회논문집
• /
• 제41권7호
• /
• pp.693-700
• /
• 2008

저류지를 설계함에 있어서 주어진 저류지 제원과 방류시설 제원하에서 저류지 설계모의모형을 이용하여 저류추적 을 실시하는 방법을 대치하고자 저류지의 예비설계 단계에서 저류지 최적계획모형에 의해 산정된 저류용량을 초기 가정치로 사용하거나 개발전후의 첨두유량비인 ${\alpha}$를 사용하여 저류지를 간편설계하기 위한 관련변수 해석을 실시하 였다. 관련변수 해석을 통해 저류지의 유입첨두유량에 대한 저류지 첨두방류량의 비인 첨두유량비 ${\alpha}$와 저류지의 저류비 $S_r$, 저류지의 방류구조 크기 D와 저류지의 최대허용수심 $H_{max}$, 저류지의 구형바닥면적 A'과 저류지의 제형바닥면적 A 및 $A_c$의 관계를 이용하여 저류지를 간편하게 설계하는 간편설계기법의 절차를 제시하였다. 저류지의 간편 설계기법은 도시화로 인한 유출총량 및 첨두유량 증대에 대처하는 방안으로 도시유역에서 유출저감시설로서 신설되는 저류지를 설계함에 있어서 기존의 많은 제반사항과 저류지 추적을 시행하지 않고 간편한 설계를 할 수 있는 방법으로 활용가능하다.

• Earthquakes and Structures
• /
• 제20권2호
• /
• pp.133-148
• /
• 2021

The paper presents a simplified force-based seismic design procedure for the preliminary design of steel haunch retrofitting for the seismic upgrade of deficient RC frames. The procedure involved constructing a site-specific seismic design spectrum for the site, which is transformed into seismic base shear coefficient demand, using an applicable response modification factor, that defines base shear force for seismic analysis of the structure. Recent experimental campaign; involving shake table testing of ten (10), and quasi-static cyclic testing of two (02), 1:3 reduced scale RC frame models, carried out for the seismic performance assessment of both deficient and retrofitted structures has provided the basis to calculate retrofit-specific response modification factor Rretrofitted. The haunch retrofitting technique enhanced the structural stiffness, strength, and ductility, hence, increased the structural response modification factor, which is mainly dependent on the applied retrofit scheme. An additional retrofit effectiveness factor (ΩR) is proposed for the deficient structure's response modification factor Rdeficient, representing the retrofit effectiveness (ΩR=Rretrofitted /Rdeficient), to calculate components' moment and shear demands for the retrofitted structure. The experimental campaign revealed that regardless of the deficient structures' characteristics, the ΩR factor remains fairly the unchanged, which is encouraging to generalize the design procedure. Haunch configuration is finalized that avoid brittle hinging of beam-column joints and ensure ductile beam yielding. Example case study for the seismic retrofit designs of RC frames are presented, which were validated through equivalent lateral load analysis using elastic model and response history analysis of finite-element based inelastic model, showing reasonable performance of the proposed design procedure. The proposed design has the advantage to provide a seismic zone-specific design solution, and also, to suggest if any additional measure is required to enhance the strength/deformability of beams and columns.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.665-666
• /
• 2006

In precision laser microfabrication, focusing is essential to acquire good machining precision and uniform machining quality. If it does not perform, laser machining cannot be realized. So, confocal scanning method with high depth resolution is used for focus detection technique. This paper is concerned with a procedure for design, analysis and performance test of an autofocus fine actuating stage, which is composed of flexure-hinge type lever mechanism and piezoelectric actuator. Through series of analytical design, the stage is simplified as a rigid bodies(lever and main body) and springs(flexure hinges). The simplified model was applied to determine the dimension of flexure hinges and lever. After structural analysis confirmed design requirement, an actual stage was made and verified through an experiment on the static and dynamic characteristics(maximum stroke and 1st natural frequency). The fabricated stage was satisfied with the design requirement.

• 한국지진공학회논문집
• /
• 제26권1호
• /
• pp.23-30
• /
• 2022

This study proposed a simplified finite element analysis procedure for designing the nonstructural masonry wall in the out-of-plane direction. The proposed method is a two-step elastic analysis procedure by bilinearizing the behavior of the masonry wall. The first step analysis was conducted with initial stiffness representing the behavior up to the effective-yield point, and the second step analysis was conducted with post-yield stiffness. In addition, the orthotropic material property of the masonry was considered in the FE analysis. The maximum load was estimated as the sum of the maximum loads in the first and second step analyses. The maximum load was converted into the moment coefficients and compared with those from the yield line method applied in Eurocode 6. The moment coefficients calculated through the proposed procedure showed a good match with those from the yield line method with less than 6% differences.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.34-40
• /
• 2004

In this paper, peliminary design procedure of magnetorheological (MR) dampers is developed for controlling the building response induced by seismic excitation. Hysteretic biviscous model which is simple and can describe the hysteretic characteristics of MR damper is used for parametric studies. The capacity of MR damper is determined as a portion of not the building weight but the lateral restoring force. A method is proposed for the optimal placement and number of MR dampers, and its effectiveness is verified by comparing it with the simplified search algorithm. Numerical results indicate that the capacity, number and the placement can be reasonably determined using the proposed design procedure.

• Steel and Composite Structures
• /
• 제1권3호
• /
• pp.295-312
• /
• 2001

The purpose of this paper is to propose a new type of steel reinforced concrete (SRC) beam-column joints and to examine the structural performance of the proposed joints, which simplify the construction procedure of steel fabrication, welding works, concrete casting and joint strengthening. In the proposed beam-column joints, the steel element of columns forms continuously built-in crossing of H-sections (${\Box}$), with adjacent flanges of column being connected by horizontal stiffeners in a joint at the level of the beam flanges. In addition, simplified lateral reinforcement (${\Box}$) is adopted in a joint to confine the longitudinal reinforcing bars in columns. Experimental and analytical studies have been carried out to estimate the structural performance of the proposed joints. Twelve cruciform specimens and seven SRC beam-column subassemblage specimens were prepared and tested. The following can be concluded from this study: (1) SRC subassemblages with the proposed beam-column joints show adequate seismic performances which are superior to the demand of the current code; (2) The yield and ultimate strength capacities of the beam-to-column connections can be estimated by analysis based on the yield line theory; (3) The skeleton curves and the ultimate shear capacities of the beam-column joint panel are predicted with a fair degree of accuracy by considering a simple stress transfer mechanism.

• 한국통신학회논문지
• /
• 제24권12B호
• /
• pp.2424-2429
• /
• 1999

본 논문은 길쌈 부호화 (convolutional encoding) 및 인터리빙(interleaving) 기법을 사용하는 채널 부호기에 있어서 메모리 크기를 최소화한 설계 방법에 관한 것이다. 기존의 구현방식에서는 프레임 데이터를 보관하는 입력버퍼 RAM과 인터리빙을 위한 인터리버 RAM을 별도로 사용해야 한다. 본 논문에서는 메모리 크기가 큰 인터리버 RAM을 사용하는 대신 입력버퍼 RAM 1개를 추가로 사용하여 길쌈 부호화 및 인터리빙을 동시에 처리할 수 있는 새로운 채널 부호기 설계 방법을 제안하였다. 이 설계 방법을 여러 디지털 이동통신 모뎀의 채널 부호기에 적용한 결과 기존 설계 방식에 비해 33% ∼60%의 메모리 크기 감소 효과가 있었으며, 프레임 데이터 수신 시 처리 절차가 간편해지고 타이밍 마진을 늘일 수 있는 장점이 있었다.

• 한국추진공학회지
• /
• 제4권3호
• /
• pp.29-37
• /
• 2000

풍력 터빈회전날개의 설계시 구조적 형상을 결정하는 예비설계 단계에서 종전에는 여러 가지 다양한 경우의 설계를 수행하여 이중 적합한 경우를 채택하는 시행착오 방법은 많은 설계시간을 요하였으나, 본 연구에서는 이 같은 설계시의 비효율적 요소를 배제하고자 적층판 이론을 기초로 한 설계 프로그램을 이용하는 설계기법을 계발함으로서 설계절차를 개선하였다. 개선된 설계절차에 따라 국제표준 설계규격 IEC1400-1에서 규정한 각 경우의 하중해석과 응력, 변형율 및 변형한계를 설정한 후, 단순화한 복합재 회전날개 구조에 혼합법칙과 주 응력 설계기법을 이용하여 복합재 구조의 형상을 정하였다. 설계된 구조는 본 연구를 통해 개발된 적층판 이론을 기초로 한 프로그램을 이용하여 강도 및 좌굴에 대한 구조의 안정성을 확인하여 상세설계 과정시 소요되는 시간을 최소화하였다. 설계된 구조는 표피 등을 고려하여 수정 설계한 후 유한요소법을 이용하여 응력, 변형율, 변위, 고유 진동수, 좌굴안정성, 피로수명 등을 해석하여 국제 표준규격의 만족 여부를 확인하였다.

• 대한조선학회논문집
• /
• 제43권3호
• /
• pp.331-339
• /
• 2006

The objective of this paper is to calculate the fatigue strength for upper deck hatch corner insert plate of large container carriers without wave load analysis and global finite element analysis at the initial design stage. Wave load analysis and global F.E. analysis for three container carriers have been performed by GL(Germanischer Lloyd) procedure to propose the equation for hatch corner stress range which is the important factor in fatigue strength calculation. Considering the restraining effect of bulkhead, three types of equation, that is, single tight bulkhead, double tight bulkhead and support bulkhead have been proposed. Using the proposed equations, a simplified fatigue analysis based on GL rules has been performed for two container carriers of which fatigue strength analysis was carried out by GL. From the comparison between fatigue strength result of using the proposed equations and that of GL, it has been found that proposed stress range equations are useful for scantling of upper deck hatch corner insert plates for over 8,000 TEU class container carriers.