• 전기의세계
• /
• v.14 no.6
• /
• pp.8-13
• /
• 1965

The TRIGA Mark-II Reactor is very simple to analyze the dynamic characteristics, so that the heat transfer function of the reactor fuel rod is able to be considered as a over-all feedback transfer function. The heat transfer dynamics of the fuel rod is derived under some assumptions. And the over-all reactor transfer function is analytically calcu- lated and it is compared with the measured value. The reactor dynamics and the stability are analyzed by means of the Root-Locus and the Nyquist.

• Journal of the Chungcheong Mathematical Society
• /
• v.26 no.3
• /
• pp.657-669
• /
• 2013

A general class of two-point optimal fourth-order methods is proposed for locating multiple roots of a nonlinear equation. We investigate convergence analysis and computational properties for the family. Special and simple cases are considered for real-life applications. Numerical experiments strongly verify the convergence behavior and the developed theory.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.2
• /
• pp.208-211
• /
• 2007

In a recently proposed method of model reduction for discrete interval systems, the denominator polynomial of a reduced model is computed by applying interval arithmetic to dominant poles of the original system. However, the denominator polynomial obtained via interval arithmetic usually has poles with larger intervals than desired ones. Hence an unstable polynomial can be derived from the stable polynomial. In this paper a simple technique is presented to partially overcome such a stability problem by accurately preserving desired real dominant poles.

• Journal of the Korean Mathematical Society
• /
• v.48 no.3
• /
• pp.487-497
• /
• 2011

In this paper we propose a simple iterative method for finding a root of a nonlinear equation. It is shown that the new method, which does not require any derivatives, has a quadratic convergence order. In addition, one can find that a hybrid method combined with the non-iterative method can further improve the convergence rate. To show the efficiency of the presented method we give some numerical examples.

• Journal of the Korean Statistical Society
• /
• v.28 no.1
• /
• pp.45-55
• /
• 1999

Knowing the number of unit roots is important in the analysis of k-dimensional multivariate autoregressive process. In this paper we suggest simple multiple unit roots test statistics based on least squares estimator for the multivariate AR(1) process in which some eigenvalues are one and the rest are less than one in magnitude. The empirical distributions are tabulated for suggested test statistics. We have small Monte-Calro studies to compare the powers of the test statistics suggested by Johansen(1988) and in this paper.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.4
• /
• pp.92-104
• /
• 2002

This study investigates, analyzes, and summarizes Dansplantation techniques and methods through practical methodology centering on fieldwork in order to present effective planting methods for large trees that have important significance. The conclusions are as follows : 1. The transplantation process of a large tree generally consists of the stages of digging up a tree, manufacturing a carrier frame, loading the tee on a vehicle, transporting, transplanting the tree, installing a strut and maintaining and managing the new transplant. In addition, planting a tree on a mounted place includes the primary procedures of trimming out the root, and preparing for transplanting the tree on a mounted place, as well as the secondary work of trimming out the root, transplanting a tree on a mounted place, maintenance and management. 2. In order to decide on a transplantation method for a large-sized tree, a structure calculation has to be performed first. That is, one must calculate the weight of the tree and the allowable stress of the strut (H-beam, etc.) fhst and then decide on the upper method through computer modeling based upon this structural calculation. 3. As a result of the analysis of a transplanted tree using the life soil method, it was confirmed that large quantities of feeder roots had developed around the root within a short time after the transplantation. The life soil method has proven to be very effective for transplantation of large-sized trees. 4. As for the production method of an H-beam strut frame, it was found that the manufacturing process and disassembly process were simple and proper; therefore, the H-beam frame is an appropriate structure to be used in the transplantation of large trees. 5. The concavo-convex method, which consists of filling the life soil in the concavo-convex area around the root, was found to be a method that promotes the growth of feeder roots within a short period of time and saves the supply of water at the same time.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.7-16
• /
• 2000

This paper described a design and implementation of the division/square-root for a redundant floating point binary number using high-speed quotient selector. This division/square-root used the method of a redundant binary addition with 25MHz clock speed. The addition of two numbers can be performed in a constant time independent of the word length since carry propagation can be eliminated. We have developed a 16-bit VLSI circuit for division and square-root operations used extensively in each iterative step. It performed the division and square-toot by a redundant binary addition to the shifted binary number every 16 cycles. Also the circuit uses the nonrestoring method to obtain a quotient. The quotient selection logic used a leading three digits of partial remainders in order to be implemented in a simple circuit. As a result, the performance of the proposed scheme is further enhanced in the speed of operation process by applying new quotient selection addition logic which can be parallelly process the quotient decision field. It showed the speed-up of 13% faster than previously presented schemes used the same algorithms.

• Archives of Craniofacial Surgery
• /
• v.19 no.3
• /
• pp.190-193
• /
• 2018

Background: This study was conducted to determine the effect of the distributional relationship between dental roots and the mandibular bone on single mandibular bone fractures, which are common craniofacial fractures. Methods: This was a retrospective, single-center study in Seoul, Korea. Patients with single mandibular fractures in the symphysis, parasymphysis, body, and angle area, with tooth structure involvement were included. The control group included patients with simple, bone-level lacerations without fractures. In total, 94 patients (72 males and 22 females) were included in the treatment group, and 125 (71 males and 54 females) were included in the control group. The height of the mandibular bone and the dental root were measured with panoramic radiography. The central incisor represented the symphysis area, the canine represented the parasymphysis area, the first molar represented the body area, and the second molar represented the angle area. Results: In the treatment group, symphysis fractures occurred in 16 patients (17%), parasymphysis fractures in 36 patients (38%), body fractures in 17 patients (18%), and angle fractures in 25 patients (27%). The ratios of the dental roots to the total height of the mandibular bone in the treatment group were 30.35%, 39.75%, 39.53%, and 36.27% for symphysis, parasymphysis, body, and angle areas, respectively, whereas in the control group, they were 27.73%, 39.70%, 36.76%, and 35.48%. The ratios of the treatment group were significantly higher than those of the control group. Conclusion: The results show that the higher ratio of the dental root to the height of the mandibular bone increases the fracture risk.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.577-609
• /
• 1995

Bacteria have been regarded as one of the most important factors in pulpal and periapical diseases. Streptococci are frequently isolated facultative anaerobes in infected root canals. Recently molecular biological techniques have been rapidly progressed. This study was designed to apply the molecular biological tools to the identification and classification of streptococci in the endodontic microbiology. Streptococci isolated from infected root canals were identified with both Vitek Systems and API 20 STREP. Identification results were somewhat different in several strains of streptococci. Eighteen streptococci and enterococcal was difficult so to digest plasmid DNA using Hind III and EcoRI to differentiate strains by restriction enzyme analysis of plasmid DNA. 16S rDNA of chromosome was amplified by polymerase chain reaction(PCR) and then restricition fragment length polymorphism(RFLP) using several restriction enzymes was observed. The molecular mass of 16S rDNA of chromosomal DNA was approximately 1.4kb. There were three to five RFLP patterns using eight restriction enzymes. RFLP patterns digested with CfoI which recognizes four base sequences were identical in all stains. Hind III which recognizes six base sequences could not digest the 16S rDNA. Restriction enzymes which recognize five base sequences were suitable for RFLP pattern analysis. At least three different restriction enzymes were needed to compare each strains. 16S rDNA PCR-RFLP was simple and rapid to differentiate and classify strains and could be used in the epidemiological study of root canal infections.

• Journal of the Korean Society of Safety
• /
• v.36 no.2
• /
• pp.58-67
• /
• 2021

Incident investigation is regarded as a means to improve safety performance. For the prevention of industrial accidents, measures such as providing safety education, enhancing management interest and participation, establishing a safety management system, and conducting inspection of the work site are necessary. In particular, accident investigation activities, which are an important element of safety management, help to prevent similar accidents, thereby minimizing damage and enhancing work safety. They are critical for understanding business-related incidents and the vulnerabilities and opportunities associated with them. Therefore, it is clear that accident investigation activities are important for accident prevention. The primary focus of many incident investigation processes is on identifying the cause of an event. While considerable research has been conducted on potential accident investigation tools there has been little research on including the views and experiences of practitioners in the accident investigation process. In this study, a questionnaire survey was conducted among safety managers in the domestic manufacturing/construction industry to understand the practice of accident investigation. The investigation pertained to companies' accident investigation systems, the competence of investigators, and the identification and recommendations of the cause of accidents. From the analysis results of accident investigations, investigators' competence, the difficulty level of investigations, and the root causes of accidents were identified from the viewpoint of the participants of the accident investigations. In particular, the development of standardized and simple accident investigation methods and their dissemination to companies were found to be necessary for activating the root cause of accidents. Based on this, it can be used as basic data for the development of root cause analysis investigation techniques that are easily applicable to organizations.