• Journal of Korean Foot and Ankle Society
• /
• v.18 no.2
• /
• pp.48-55
• /
• 2014

Hallux valgus, or a 'bunion', is a deformity characterized by lateral deviation of the big toe. Surgery is indicated when conservative treatments have failed to result in improvement of symptoms. Operative techniques include simple bunionectomy, distal soft tissue procedure, phalangeal osteotomy, metatarsal osteotomy (distal, shaft, or proximal), arthrodesis (metatarsophalangeal or tarsometatarsal), or resection arthroplasty. Good results are expected when the selection of operative technique is based on the correct treatment principle.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.128-131
• /
• 2003

The effect of microwave irradiation on waste activated sludge was investigated in order to improve solubilization. a different levels of microwave irradiation time were varied within a range from 1 min to 15 min. When WAS was pretreated at 1, 3, 5, 7, and 15 min, the SCOD concentration increased according to microwave irradiation time. A simple batch procedure was used to measure the VFA potential, i.e. the amount of VFA that can be formed through digestion of organic constituent in sludge. At equilibrium point, TVFA in the case of 1, 3, 5, 7 and 15 min microwaved sludges was 8%, 122%, 243%, 279% and 232% higher than that in the case of raw sludge, respectively.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.501-504
• /
• 2003

A novel prepurification method was developed aiming at increasing yield and purity, also reducing solvent usage for purification of paclitaxel. This method was a simple and efficient procedure, for the isolation and prepurification of paclitaxel from the biomass of Taxus chinensis, consisting of micelle formation, followed by two steps of precipitation. The use of a micelle and precipitation in the prepurification process allows for rapid separation of paclitaxel from interfering compounds and dramatically reduces solvent usage compared to alternative methodologies. This prepurification process serves to minimize the size and complexity of the HPLC operations for paclitaxel purification. This process is readily scalable to a pilot plant and eventually to a production environment where multikilogram quantities of material are expected to be produced. As much as possible, the process has been optimized to minimize solvent usage, complexity, and operating costs.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.3 no.1
• /
• pp.115-125
• /
• 1999

Simple Genetic Algorithm(SGA) proposed by J. H. Holland is a population-based optimization method based on the principle of the Darwinian natural selection. The theoretical foundations of GA are the Schema Theorem and the Building Block Hypothesis. Although GA does well in many applications as an optimization method, still it does not guarantee the convergence to a global optimum in some problems. In designing intelligent systems, specially, since there is no deterministic solution, a heuristic trial-and error procedure is usually used to determine the systems' parameters. As an alternative scheme, therefore, there is a growing interest in a co-evolutionary system, where two populations constantly interact and co-evolve. In this paper we review the existing co-evolutionary algorithms and propose co-evolutionary schemes designing intelligent systems according to the relation between the system's components.

• Journal of Microbiology and Biotechnology
• /
• v.2 no.1
• /
• pp.21-25
• /
• 1992

Human lymphotoxin (LT) was produced in E. coli as a soluble protein. The level of recombinant human LT production was about 4% of the total souble proteins of E. coli extracts. Recominant human LT was purified to apparant homogeneity by a simple procedure utilizing FPLC on Mono Q and Mono S columns. The specific activity of the purified LT was $10\times10^7\;units/mg$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.921-924
• /
• 2005

Diesel generator sets with resilient mounts often experience resonances by major excitations which come from diesel engine and their foundation with rigid body modes. Because their natural frequency is determined by moment of inertia and stiffness of resilient mount vibration problems are resolved by changing location and stiffness of resilient mounts. But the calculated natural frequencies are inaccurate due to uncertainty of the inertia and mount stiffness. So this result can be useless on the design stage. In this paper, the stiffness of mount is evaluated on result from mount stiffness test in laboratory and generator set vibration test and a simple calculation method for moment of inertia is proposed. Based on these data, the procedure to select optimized mount stiffness and location on the design stage is set up.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.3
• /
• pp.11-18
• /
• 2001

A simple and convenient method of analysis for obtaining the individual stress intensity factors in a three-dimensional mixed mode crack is proposed. The procedures presented here are based on the path independence of J integral and mutual or two-state conservation integral, which involves two elastic fields. The problem is reduced to the determination of mixed mode stress intensity factor solutions in terms of conservation integrals involving known auxiliary solutions. Some numerical examples are presented to investigate the effectiveness and applicability of the method for a three-dimensional penny-shaped crack problem under mixed mode. This procedure is applicable to a three-dimensional mixed mode curved crack.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.421-424
• /
• 1999

The purpose of this study is to demonstrate a variety of methods for reducing the speckle noise content of SAR images, whilst at the same time retaining the fined details and average radiometric properties of the original data. In order to increase the accuracy of classification, Two categories of filters are used (speckleblind(simple), Speckle aware(intelligent)) and Segmentation of highly speckled radar imagery is achieved by the use of the Gaussian Markov Random Field model(GMRF). The problems in applying filtering techniques to different object types are discussed and the GMRF procedure and efficiency of the segmentation also discussed.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.649-652
• /
• 2005

In this paper we present a detail approach of the determination of IFOV (Instantaneous Field of View) of high-resolution (l m) panchromatic satellite image over test site. IFOV is the representative measurements as the determination of the spatial resolution in remote sensed imaging system. It can be defined as some area on the ground with the particular altitude when the satellite acquires the image at any given time. Especially, spatial resolution of passive sensors primarily depends on their IFOV. The determination of IFOV goes through simple steps of procedure as followings: Firstly, the GSD (Ground Sample Distance) should be computed at each point on the geometrically corrected image. Then, The GSD is converted into the IFOV. So we are going to explain our test procedures and results.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.4
• /
• pp.437-441
• /
• 2011

Objective: The objective this paper is to introduce the agricultural ergonomics and to show the importance of it in improving the agricultural works. Background: Despite of rapid advancement of technologies and adoption of modern mechanical equipments at farms in Korea, most of agricultural works have still remained manual and thus have regarded as one of the hardest works. With aging and feminization in rural areas, the need to improve agricultural works has grown quite much. Agricultural ergonomics have been known as a good tool in improving agricultural works around the world. Recently Korean government initiated a national program of providing assistive equipments to help farmers and a few ergonomists started to apply agricultural ergonomics in our rural villages as a part of this program. Method: This study reviewed how Ergonomics was used for the agricultural work. Results: Methods of Ergonomics which are used for the agricultural ergonomics and the simple procedure of the agricultural ergonomics were presented. Conclusion: It was found that agricultural works can be improved quite much using the agricultural ergonomics principle and the musculoskeletal stress of farmers can be reduced significantly.