• Archives of Plastic Surgery
• /
• 제36권3호
• /
• pp.318-321
• /
• 2009

Purpose: The bony mallet finger injury is generally managed by conservative treatments, but operative treatments are needed especially when the fractures involve above 30% of articular surface or distal phalanx is accompanied by subluxation in the volar side. This is the reason they often result in chronic instability, articular subluxation and unsatisfactory cosmetic. In this report, We describe new method using the hook plate as an operative treatment of Mallet finger deformity. Methods: Among 13 patients with Mallet finger deformity who came from February 2006 to February 2008, six patient were included in surgical indication. Under local anesthesia, H or Y type incision was made at the DIP joint area. After the DIP joint extension, the hook plate was put on the fracture line, and one self tapping screw was used for fixation. 2 hole plate which was one of the holes in 1.5 mm diameter was cut in almost half and bended through approximately $100^{\circ}$. Results: In all six cases which applied the hook plate, complications such as loss of reduction or nail deformity were not seen. In only one patient, hook pate was removed due to inflammatory reaction after surgery. At 2 weeks after operation, active motion of DIP joint was performed. The result was satisfactory not only cosmetically but also functionally. At 6 weeks after operation, the range of motion of DIP joint was average $64^{\circ}$. Conclusion: The purpose of the operative treatment for mallet finger deformity using the hook plate is to provide anatomical reduction with rigid fixation and to prevent contracture at the DIP joint. While other operations take 6 weeks, the operation using the hook plate begins an active motion at 2 weeks after operation. Complication rate was low and the method is rather simple. Thus, the operation using the hook plate is recommended as a good alternative method of the mallet finger deformity treatment.

• 재활복지공학회논문지
• /
• 제10권1호
• /
• pp.65-72
• /
• 2016

본 논문은 계단 보행 조건에서 작동할 수 있는 능동형 대퇴의지를 설계하고 구조 최적화를 통해 경량화를 진행하는 것을 목적으로 한다. 계단 보행 시 무릎에 걸리는 토크는 일반 보행에 비해 크므로 능동형 상대적으로 큰 토크를 낼 수 있는 동력 시스템이 필요하다. 또한 의지의 무게는 사용자의 착용감과 피로감과 연관이 되므로 의지의 경량화 설계 또한 필수적이다. 계단 보행 시 필요한 토크를 만들어내고 경량화와 소형화 구조를 적용하기 위해 플랫형 BLDC 모터를 사용하였다. 다양한 감속 장치를 이용해 필요 토크를 생성하고 작동각도 및 속도를 만족할 수 있게 감속비를 선정하였다. 구조 및 구동부 설계가 완료된 후 최적화를 통해 구조 경량화를 수행하였다. 계단 보행 시 나타나는 하중 조건을 고려하여 최적화를 수행하였으며, 해석 및 실험을 통해 최적화된 구조의 안정성을 검증하였다. 결과적으로 구조물의 강성은 유지하면서 위상 최적화와 형상 최적화를 통하여 무게를 감량하였으며, 공간 효율이 좋아졌다.

• 대한토목학회논문집
• /
• 제31권2D호
• /
• pp.237-245
• /
• 2011

Asphalt Plug Joint(APJ)는 미국을 비롯한 유럽의 여러 국가에서 적용사례가 늘어가고 있는 새로운 형태의 신축이음장치이다. APJ는 시공 및 유지보수 비용이 저렴하고 시공이 간단하며, 우수한 평탄성을 확보한다는 장점을 가지고 있으나 조기파손되는 문제점이 드러나 사용성을 방해하고 있다. 이러한 문제를 해결하기 위한 연구가 진행되어 왔고, 기존 연구 중 FEM 해석을 수행하였으나 FEM 해석시 재료를 너무 단순화하여 해석함으로써 해석의 신뢰성이 많이 떨어져 신축이음장치의 거동을 분석하는데 미흡하였다. 따라서 본 논문에서는 이러한 FEM 해석의 신뢰성을 높이기 위해 새로운 재료모델을 제안하고 실제 거동과 비교하여 유효성을 확인하였다. 본 연구에서 FEM 해석은 ABAQUS 전산 프로그램를 사용하였으며 재료모델은 Bramel et al.이 APJ 재료 시험한 결과를 근거로 탄소성모델과 점탄성모델을 제안하였다. 탄소성모델은 시간에 따른 변형속도를 반영하지 못하므로 시간독립해석으로 정의하였으며, 점소성 모델은 변형속도를 반영하므로 시간의존해석으로 정의하였다. 해석을 통해 APJ의 거동에 영향을 미치는 다양한 요소의 영향을 검토하였으며, 시간의존해석이 실제 실험결과와 비슷한 거동을 나타냄을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.12-15
• /
• 1996

In this paper, a new shape control law is derived as a result of introducing the parametric curve representation. This control alw is based on the estimation of the curve parameters corresponding to the target joint positions and the target tip position. Estimating target curve parameters makes it possible to find, easily, a simple shape control law by the Lyapunov design method.

• International Journal of Control, Automation, and Systems
• /
• 제3권3호
• /
• pp.453-460
• /
• 2005

In this paper, a prototype Cartesian Parallel Manipulator (CPM) is demonstrated, in which a moving platform is connected to a fixed frame by three PRRR limbs. Due to the orthogonal arrangement of the three prismatic joints, it behaves like a conventional X-Y-Z Cartesian robot. However, because all the linear actuators are mounted at the fixed frame, the manipulator may be suitable for applications requiring high speed and accuracy. Using a geometric method and the practical assumption that three revolute joint axes in each limb are parallel to one another, a simple forward kinematics for an actual model is derived, which is expressed in terms of a set of linear equations. Based on the error model, two calibration methods using full position and length measurements are developed. It is shown that for a full position measurement, the solution for the calibration can be obtained analytically. However, since a ball-bar is less expensive and sufficiently accurate for calibration, the kinematic calibration experiment on the prototype machine is performed by using a ball-bar. The effectiveness of the kinematic calibration method with a ball-bar is verified through the well­known circular test.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.869-872
• /
• 2001

Blind identification and equalization of communication channel is important because it does not need training sequence, nor does it require a priori channel information. So, we can increase the bandwidth efficiency. The linear prediction error method is perhaps the most attractive in practice due to the insensitive to blind channel estimator and equalizer length mismatch as well as for its simple adaptive algorithms. In this paper, we propose method for fractionally spaced blind equalizer with arbitrary delay using one-step forward prediction error filter from second-order statistics of the received signals for SIMO channel. Our algorithm utilizes the forward prediction error as training sequences for data estimation and desired signal for channel estimation.

• ETRI Journal
• /
• 제30권3호
• /
• pp.441-450
• /
• 2008

The scalable extension of H.264, known as scalable video coding (SVC) has been the main focus of the Joint Video Team's work and was finalized at the end of 2007. Synchronization between media is an important aspect in the design of a scalable video streaming system. This paper proposes an efficient media synchronization mechanism for SVC video transport over IP networks. To support synchronization between video and audio bitstreams transported over IP networks, a real-time transport protocol/RTP control protocol (RTP/RTCP) suite is usually employed. To provide an efficient mechanism for media synchronization between SVC video and audio, we suggest an efficient RTP packetization mode for inter-layer synchronization within SVC video and propose a computationally efficient RTCP packet processing method for inter-media synchronization. By adopting the computationally simple RTCP packet processing, we do not need to process every RTCP sender report packet for inter-media synchronization. We demonstrate the effectiveness of the proposed mechanism by comparing its performance with that of the conventional method.

• 비파괴검사학회지
• /
• 제26권6호
• /
• pp.417-426
• /
• 2006

A Digital X-ray imaging system using Compton backscattering has been developed to obtain a cross-sectional profile and mass loss of corroded lap-splices of aging aircraft from density variation. A slit-type camera was designed to focus on a small scattering volume inside the material, from which the backscattered photons are collected by a collimated scintillator detector for interpretation of material characteristics. The cross section of the lap-joint is scanned by moving the scattering volume through the thickness direction of the specimen. The mass loss of each layer has been estimated from a Compton backscatter A-scan to obtain the thickness of each layer including the aluminum sheet, the corrosion layer and the sealant. Quantitative information such as location and width of planar corrosion in the lap splices of fuselages is obtained by deconvolution using a nonlinear least-square error minimization method(BFGS method): A simple reconstruction model is also introduced to overcome distortion of the Compton backscatter data due to attenuation effects attributed to beam hardening and quantum noise.

• 한국멀티미디어학회논문지
• /
• 제12권6호
• /
• pp.824-832
• /
• 2009

Multi-radio multi-channel Wireless Mesh Network requires an effective management policy to control the assignment of channels to each radio. We concentrated our investigation on modeling method and solution to find a dynamic channel assignment scheme that is adapted to change of network traffic. Multi-path routing scheme was chosen to overwhelm the unreliability of wireless link. For a particular traffic state, our optimization model found a specific traffic distribution over multi-path and a channel assignment scheme that maximizes the overall network throughput. We developed a simple heuristic method for channel assignment by gradually removing clique load to obtain higher throughput. We also presented numerical examples and discussion of our models in comparison with existing research.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.21-24
• /
• 1999

There-have been many control strategies for the enact joint position tracking of flexible manipulators, but direct cartesian space tracking control methods an not developed well. In this paper, we propose a PD control method based on the cartesian error in the end point trajectory tracking. the proposed controller is composed of PD control combined with nonlinear saturation term hut has a very simple form. the effect of this term is continuous suppression of vibration which is induced by the coupling of rigid motion. This control works both on the regulation and on the tracking cases. The performance and validity of this control method is shown by simulation examples.