• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.31-34
• /
• 2002

An efficient implicit multigrid method is presented for the Navier-Stokes and $k-{\omega}$ turbulence equations. Freezing and limiting strategies are applied to improve the robustness and convergence of the multigrid method. The eddy viscosity and strongly nonlinear production terms of turbulence are frozen in the coarser grids by passing down the values without update of them. The turbulence equations together with the Navier-Stokes equations, however, are consecutively solved on the coarser grids in a loosely coupled fashion. A simple limit for k is also introduced to circumvent slow-down of convergence. Numerical results for the unseparated and separated transonic airfoil flows show that all computations converge well without any robustness problem and the computing time is reduced to a factor of about 3 by the present multigrid method.

• Journal of Veterinary Clinics
• /
• v.2 no.1
• /
• pp.121-131
• /
• 1985

Mouse embryos of 8-cell stage and compacted morulae(approximately 16 cells) containing different number of blastomeres were bisected and cultured in vitro to determine the developmental potentials of the divided embryos compared with those of unmanipulated control embryos. The results were as follows. 1. Micromanipulation was performed successfully by means of a simple manipulator which holds a fine glass, needle, without the use of any micro-instruments for support. 2. The percentage of bisected morulae with 7-9 blastomeres that developed to eu-blastocyst was 94.1% while only 64.8% of the bisected 8-cell embryos with 4 blastomeres developed to eublastocysts (p<0.05). 3. The percentage of eu-blastocysts decreased, while that of pseudoblastocysts and trophectodermal vesicle increased as the number of blastomeres decreased in the bisected embryos of the two stages. 4. The time of the blastocoele re-formation of the bisected and control embryos was not significantly different in morulae stage embryos, but it was significantly delayed in the 8-cell stage embryos (Eu-B, Pseudo-B) compared with control embryos (P<0.01, P<0.05 respectively).

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.11
• /
• pp.1207-1218
• /
• 1990

The lack of persistent excitation (PE) can be the reason of freezing in the recursive least square estimators and the covariance windup in the exponential weighted least square estimators. We present a theoretical analysis of these phenomena and a simple method to check the exciting condition in real time. Using these results and under some conditions such as slowly time varying Plant and a tracking problem for set point, a robust self-tuning regulators without PE is proposed. In this algorithm, when PE is not satisfied, only plant gain is estimated, and then the system parameters are corrected by it. It is shown that the gain adaptive scheme makes the robustness to be improved against modeling error, off-set, and correlated noise etc, by the results of analysis and simulations.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.3
• /
• pp.382-395
• /
• 1995

A numerical study has been performed on flow characteristics in a domestic refrigerator whose size is $540mm{\times}1,530mm{\times}680mm$, considering existence of a fan and evaporator. The flow field has been simulated with the low Reynolds number $k-\bar{\varepsilon}$ turbulent model and SIMPLE algorithm based on the finite volume method. The region of fan which makes driving force for cold air distribution was modeled as a region in which momentum sources are generated uniformly. The concept of the distributed pressure resistance was applied to describe the momentum loss from evaporator. The result showed that the rate of cold air distribution into freezing room and cold storage room was almost 7 : 3.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1201-1206
• /
• 2004

This paper deals with the numerical analysis of natural convection flow induced by the density inversion effect of water inside horizontal pipe. The numerical method is based on SIMPLE/PWIM in general coordinate for its wide applicabilities. The numerical tool was validated through the comparison with the previous results concerning the density inversion effect of water It is shown that the developed numerical tool could predict the flow pattern and the heat transfer phenomena qualitatively And it is also found that the density inversion effect of water has significant effects on the flow pattern.

• Food Science and Industry
• /
• v.45 no.4
• /
• pp.21-28
• /
• 2012

Bread making is based on several simple unit operations, basically kneading, fermentation and baking; however, it is still a quite complex process and bread quality can be strongly affected by minor details. The market of bread production is roughly shared at 50-50 between the industry market and the artisanal market, even though the frontier between these two players is not very easy. Different strategies have been developped by the industry to extend the shelf life of bread or to interrupt the bread making process. Freezing for example has been used form the 50s to extend the shelf life of bakery products. It was first applied to fully baked products and then to frozen dough which appeared as an interesting strategy to interrupt the bread making protocol. This paper presents a review on key issues of the frozen dough technology.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.1
• /
• pp.89-99
• /
• 2020

This study was conducted as a basic research to create a sound and vital ecological environment in the city compared to the appearance characteristics of Gap stream(G-stream), which are the main stream of Banseok stream(B-stream), by analyzing the characteristics of waterbirds, including Wild Spot-billed Duck (S-Duck), that live in B-stream built as ecological stream. The waterbird survey was conducted by the line census for 3.2km, Jukdong-bridge to Jamiseon-bridge, from January to August 2018. The analysis of the survey was conducted with Relative species density(RD) of the emerging waterbird species, the Species diversity and Density Per Unit area for 100㎡(DPU). The waterbird survey results of B-stream was conducted 65 times. The five types of water birds that appeared during the survey were Spot-billed Duck(Anas poecilorhyncha), Teal(Anas crecca), Little Egret(Egretta garzetta), Great Egret(Egretta alba), and Grey Heron(Ardea cinerea). As a result, for S-Duck at B-stream, RD was 89.9%, monthly species diversity was simple as 0.3801 in January, 0.5943 in February and 0.3501 in August. The DPU of the S-Duck was 0.165/100㎡ in the B-Stream survey section which was 4.9 times higher than the main stream section, G-stream. The non-freezing zone of the city's small stream is expected to play an important role as a winter stop for wild birds such as S-Duck during the freezing period of the huge stream. For this reason, considering the ecological characteristics of wild waterbirds such as S-Duck when creating ecological stream, a: space and linear selection of waterways which can minimize the impact of natural enemy and increasing the number of walkers, b: management water-friendly plants in the low flow channel, c: arrangement walking-bicycle road will be necessary.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.3
• /
• pp.39-45
• /
• 2010

When the ground temperature drops below $0^{\circ}C$, wet soils expand due to the ice formation in their porous space. This results in frost heave which causes structural stability problems. Frost heave is attributed by several factors such as physical soil properties and heat transfer including pore water phase change. Due to the complex physical phenomena, reliable and verified multi-dimensional numerical models for frost heave problems are still in a research stage. This study presents an efficient and simple method of overcoming numerical problems associated with sudden jump of heat capacity due to the phase change from water to ice in the pore space. This paper proposes heat transfer equation and finite element method when the saturated soils or porous rocks are subjected to freezing. Numerical analyses using the proposed method agree well with the known closed form solution and the laboratory test results.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.2
• /
• pp.251-256
• /
• 1999

The present study was conducted to evaluate whether vitrification could be used for ovarian tissue preservation. The important issue here is that the vitrification is very simple, easy, and economical compared to the conventional cryopreserving method that using automatic freezing instrument. Human ovarian cortical tissues were cryopreserved by vitrification with 5.5 M ethylene glycol and 1.0 M sucrose as cryoprotectant. Three points of temperature ($4^{\circ}C$, room temperature, and $37^{\circ}C$) and two points of duration (5 or 10 minutes) for cryoprotectant treatment were examined to determine the best condition for vitrification of the human ovarian cortical tissues. After thawing, viability of the isolated primordial follicles was examined by dye-exclusion method. Histological appearance of tissues before and after the cryopreservation was evaluated. There was no toxic effect of the 5.5 M ethylene glycol on the primordial follicles. However, when the tissues were treated with cryoprotectant at $37^{\circ}C$ for 10 minutes and exposed to liquid nitrogen, it seems likely that there is certain deleterious effects on the viability of the primordial follicles. The highest viability of the primordial follicles was obtained with the treatment of cryoprotectant at room temperature for 10 minutes. Follicles and oocytes survived after freezing and thawing had the similar normal shapes as was seen in the specimens before cryopreservation. It would be useful to apply vitrification in establishing ovarian tissue banking for clinical purposes.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.717-721
• /
• 2013

Biomaterials like silk fibroin (SF) and poly(vinyl alcohol) (PVA) have received increasing attention in biomedical applications because of their attractive properties such as hydrophobicity and biocompatibility. In this study, efficient systems consisting of interpenetrating SF/PVA hydrogels were prepared as potential candidate for wound dressing applications. A simple approach consisting of sonication and a freezing-thawing technique was adopted to fabricate the hydrogels. Different blend ratios consisting of SF (100, 75, 50, 25 and 0%) with respect to the weight of PVA were prepared. The produced hydrogels were characterized for physico-chemical investigations using various states of techniques like; FE-SEM, TGA, FTIR and tensile strength. The addition of PVA to SF was proved to be beneficial in terms of reducing the pore size and swelling ratio of hydrogels. The mechanical property of SF had been increased by addition of PVA. These results show that SF/PVA hydrogels may serve as potential candidates for wound dressing application.