• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.260-260
• /
• 2009

In high-efficiency crystalline silicon solar cell, If high-efficiency solar cells are to be commercialized, It is need to develop superior contact formation method and material that can be inexpensive and simple without degradation of the solar cells ability. For reason of plated metallic contact is not only high metallic purity but also inexpensive manufacture. It is available to apply mass production. Especially, Nickel, Copper are applied widely in various electronic manufactures as easily formation is available by plating. Ni is shown to be a suitable barrier to Cu diffusin as well as desirable contact metal to silicon. Nickel monosilicide has been suggested as a suitable silicide due to its lower resistivitym lower sintering temperature and lower layer stress than $TiSi_2$. In this paper, Nickel as a seed layer and diffusion barrier is plated by electroless plating to make nickel monosilicide.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.454-457
• /
• 1987

Formation of the titanium silicides was performed by the furnace annealing. Ti-silicide was formed by reacting Ti films with singlecrystalline silicon in vacuum or nitrogen ambient in the temperature range $500{\sim}900^{\circ}C$. The Ti-Si interaction in such films was investigated by using X-ray diffraction, and sheet resistance measurements. It was found that the dorminant crystal phase of silicide formed during annealing at $600{\sim}700^{\circ}C$ was TiSi, and $TiSi_2$ phase is associated with a very low sheet resistance(<$2{\Omega}/{\Box}$).

• Korean Journal of Materials Research
• /
• v.2 no.1
• /
• pp.27-34
• /
• 1992

Tantalum silicide films are prepared from a composite $TaSi_{28}$ target source and subjected to rapid thermal annealing($500-1100^{\circ}C$, 20sec) in Ar ambient. The formation and the properties of tantalum silicides have been investigated by using 4-point probe, x-ray diffraction, scanning electron microscope(SEM), Auger electron spectroscope(AES), and ${\alpha}$-step. It has been found that the sample annealed above $700^{\circ}C$ forms a polycrystalline $TaSi_2$ phase, and grains grow in granular form regardless of the kind of substrates. The mechanism of the formation of tantalum silicide is the nucleation and growth by Ta-Si short range reaction. The tantalum silicide film has the relatively low resistivity($70-72.5{\mu}{\Omega}-cm$) and smooth surface roughness.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.230-234
• /
• 2009

It is significant technique to increase competitiveness that solar cells have a high energy conversion efficiency and cost effectiveness. When making high efficiency crystalline Si solar cells, evaporated Ti/Pd/Ag contact system is widely used in order to reduce the electrical resistance of the contact fingers. However, the evaporation process is no applicable to mass production because high vacuum is needed. Furthermore, those metals are too expensive to be applied for terrestrial applications. Ni/Cu/Ag contact system of silicon solar cells offers a relatively inexpensive method of making electrical contact. Ni silicide formation is one of the indispensable techniques for Ni/Cu/Ag contact sytem. Ni was electroless plated on the front grid pattern, After Ni electroless plating, the cells were annealed by RTP(Rapid Thermal Process). Ni silicide(NiSi) has certain advantages over Ti silicide($TiSi_2$), lower temperature anneal, one step anneal, low resistivity, low silicon consumption, low film stress, absence of reaction between the annealing ambient. Ni/Cu/Ag metallization scheme is an important process in the direction of cost reduction for solar cells of high efficiency. In this article we shall report an investigation of rapid thermal silicidation of nickel on silngle crystalline silicon wafers in the annealing range of $350-390^{\circ}C$. The samples annealed at temperatures from 350 to $390^{\circ}C$ have been analyzed by SEM(Scanning Electron Microscopy).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.215-216
• /
• 2013

The silicide is a compound of Si with an electropositive component. Silicides are commonly used in silicon-based microelectronics to reduce resistivity of gate and local interconnect metallization. The popular silicide candidates, CoSi2 and TiSi2, have some limitations. TiSi2 showed line width dependent sheet resistance and has difficulty in transformation of the C49 phase to the low resistive C54. CoSi2 consumes more Si than TiSi2. Nickel silicide is a promising material to substitute for those silicide materials providing several advantages; low resistivity, lower Si consumption and lower formation temperature. Nickel silicide (NiSi) nanowire (NW) has features of a geometrically tiny size in terms of diameter and significantly long directional length, with an excellent electrical conductivity. According to these advantages, NiSi NWs have been applied to various nanoscale applications, such as interconnects [1,2], field emitters [3], and functional microscopy tips [4]. Beside its tiny geometric feature, NW can provide a large surface area at a fixed volume. This makes the material viable for photovoltaic architecture, allowing it to be used to enhance the light-active region [5]. Additionally, a recent report has suggested that an effective antireflection coating-layer can be made with by NiSi NW arrays [6]. A unique growth mechanism of nickel silicide (NiSi) nanowires (NWs) was thermodynamically investigated. The reaction between Ni and Si primarily determines NiSi phases according to the deposition condition. Optimum growth conditions were found at $375^{\circ}C$ leading long and high-density NiSi NWs. The ignition of NiSi NWs is determined by the grain size due to the nucleation limited silicide reaction. A successive Ni diffusion through a silicide layer was traced from a NW grown sample. Otherwise Ni-rich or Si-rich phase induces a film type growth. This work demonstrates specific existence of NiSi NW growth [7].

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.11
• /
• pp.1-8
• /
• 2003

In this paper, the dependence of silicide properties such as sheet resistance and cross-sectional profile on the dopants for source/drain and gate has been characterized. There was little difference of sheet resistance among the dopants such as As, P, BF$_2$ and B$_{11}$ just a(ter formation of NiSi using RTP (Rapid Thermal Process). However, the silicide properties showed strong dependence on the dopants when thermal treatment was applied after silicidation. BF$_2$ implanted silicon showed the most stable property, while As implanted one showed the worst. The main reason of the excellent property of BF$_2$ sample is believed to be tile retardation of hi diffusion by the flourine. Therefore, retardation of Ni diffusion is highly desirable for high performance Ni-silicide technology.y.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.6
• /
• pp.487-490
• /
• 2007

In this paper, the formation and thermal stability characteristics of Ni silicide using Ni-V alloy on Boron cluster ($B_{18}H_{22}$) implanted bulk and SOI substrate were examined in comparison with pure Ni for nano-scale CMOSFET. The Ni silicide using Ni-V alloy on $B_{18}H_{22}$ implanted SOI substrate after high temperature post-silicidation annealing showed the lower sheet resistance, no agglomeration interface image and lower surface roughness than that using pure Ni. The thermal stability of Ni silicide was improved by using Ni-V alloy on $B_{18}H_{22}$ implanted SOI substrate.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.4
• /
• pp.5-9
• /
• 2007

Phase transition and dopant redistribution during silicidation of $CoSi_2$ thin films were characterized depending on their preparation methods. Our results indicated that cleanness of the substrate surface played an important role in the formation of the final phase. This effect was found to be reduced by addition of W resulting in the formation of $CoSi_2$. However, even in this case, the formation of the final phase was achieved at the cost of extra thermal energy, which induced rough interface between the substrate and the silicide film. As for the dopant redistribution, the deposition sequence of Co and Si on SiGe was observed to induce significant differences in the dopant profiles. It was found that co-deposition of Co and Si resulted in the least redistribution of dopants thus maintaining the original dopant profile.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.507-514
• /
• 1993

The solid state reaction of Mo/Si multilayer thin films produced by RF magnetron sputtering technique was examine dusing differential scanning calorimetry (DSC) and x-ray diffraction, and explained in view of two concepts, effective drivig force and effective heat of formation. In constant scanning rate DSC, there were two exothermic peks which corresponded to the formation of h-MoSi2 and t-MoSi2 , respectively. The activation energyfor theformation of h-MoSi2 was 1.5eV , and that of t-MoSi2 was 7.8eV. Nucleation wa stherate controlling mechanism for each of the silicide formation. Amorphous phase was not formed , which was consistent withtheprediction by the concept of effective driving force. h-MoSi2 the first crystalline phase, was considered to have lower interfacial free energy than t-MoSi2 and by increasing temperature it was transformed into more stable t-MoSi2.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.3
• /
• pp.110-114
• /
• 2007

Dependence of the thermal stability of nickel silicide on the film stress of inter layer dielectric (ILD) layer has been investigated in this study and silicon nitride $(Si_3N_4)$ layer is used as an ILD layer. Nickel silicide was formed with a one-step rapid thermal process at $500^{\circ}C$ for 30 sec. $2000{\AA}$ thick $Si_3N_4$ layer was deposited using plasma enhanced chemical vapor deposition after the formation of Ni silicide and its stress was split from compressive stress to tensile stress by controlling the power of power sources. Stress level of each stress type was also split for thorough analysis. It is found that the thermal stability of nickel silicide strongly depends on the stress type as well as the stress level induced by the $Si_3N_4$ layer. In the case of high compressive stress, silicide agglomeration and its phase transformation from the low-resistivity nickel mono-silicide to the high-resistivity nickel di-silicide are retarded, and hence the thermal stability is obviously improved a lot. However, in the case of high tensile stress, the thermal stability shows the worst case among the stressed cases.