• STI Policy Review
• /
• v.1 no.3
• /
• pp.1-15
• /
• 2010

This paper makes the case that a new policy strategy to enhance a global green recovery is needed urgently. The new strategy requires two essential elements. First, G20 economies should follow the lead of South Korea and China and turn their green stimulus investments into a serious long-term commitment, and to support these investments, they should adopt environmental pricing policies and instigate pricing and regulatory reforms to reduce carbon dependency. Second, the G20 also needs to target and coordinate assistance to developing economies in science, technology and innovation (STI) for clean energy. Such assistance is essential to help developing economies to overcome the skills, technological and capital gap that they face in clean energy technologies over the long term. Reform of the Clean Development Mechanism (CDM) is also necessary to establish a long-term global price signal for carbon, and to increase the coverage of developing economies, the sectors and technologies and the overall financing of clean energy projects. Formulating such a policy strategy should appeal to both the Asian-Pacific and Western economies comprising the G20, and by working together to formulate such a strategy, the G20 could lead the way toward a new era of global economic management and STI cooperation in clean energy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.661-663
• /
• 2021

Network performance is degraded when the UE is disconnected because the outage occurs at the base station in a mobile communication system. Therefore it is important to detect and recover the outage. In this paper, detecting the outage base station by using the KPI and the network scanning in the neighbor base station, and increasing the transmit power and changing the frequency band to recovery the outage scheme is proposed. The proposed scheme uses not only the KPI of the base station but also the network scanning of the neighbor base stations to detect the outage base station, so that it is possible to detect the outage base station more accurately. In addition, when the outage occurred, the neighbor base station changes the transmit power and frequency band to recover the outage with less signal interference.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.8
• /
• pp.706-712
• /
• 2002

In general, a deadlock in flexible manufacturing systems (FMSs) is caused by a resource limitation and the diversity of routings. However, the deadlock of industrial controllers such as programmable logic controllers (PLCs) can occur from different causes compared with those in general FMSs. The deadlock of PLCs is usually caused by an error signal between PLCs and manufacturing systems. In this paper, we propose a deadlock detection and recovery (DDR) algorithm to resolve the deadlock problem of PLCs at design stage. This paper employs the MAPN (modified automation Petri net), MTPL (modified token passing logic), and ECC (efficient code conversion) algorithm to model manufacturing systems and to convert a Petri net model into a desired LD (ladder diagram). Finally, an example of manufacturing systems is provided to illustrate the proposed DDR algorithm.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1185-1188
• /
• 2003

This paper describes a design for a 2.5Gb/s serial data link CMOS transceiver based on the InfiniBand$^{TM}$ specification. The transceiver chip integrates data serializer, line driver, Tx PLL, deserializer, clock recovery, and lock detector. The designed transceiver is fabricated in a 0.25 ${\mu}{\textrm}{m}$ CMOS mixed-signal, 1-poly, 5-metal process. The first version chip occupies a 3.0mm x 3.3mm area and consumes 450mW with 2.5V supply. In 2.5 Gbps, the output jitter of transmitter measured at the point over a 1.2m, 50Ω coaxial cable is 8.811ps(rms), 68ps(p-p). In the receiver, VCO jitter is 18.5ps(rms), 130ps(p-p), the recovered data are found equivalent to the transmitted data as expected. In the design for second version chip, the proposed clock and data recovery circuit using linear phase detector can reduce jitter in the VCO of PLL.L.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.4
• /
• pp.188-193
• /
• 2003

This paper describes a novel burst-mode clock and data recovery (CDR) circuit which can be used for 622Mbps burst mode applications. The CDR circuit is basically a phase locked loop (PLL) having two phase detectors (PDs), one for the reference clock and the other for the NRZ data, whose operations are controlled by an external control signal. This CDR was fabricated in a 1-poly 5-metal $0.25{\;}\mu\textrm{m}$ CMOS technology. Jitter generation, burst/continuous mode data receptions were tested. Operational frequency range is 320Mhz~720Mhz and BER is less than 1e-12 for PRBS31 at 622Mhz. For the same data sequence, the extracted clock jitter is less than 8ps rms. Power consumption of 100mW was measured without I/O circuits.

• Proceedings of the KOSOMBE Conference
• /
• v.1989 no.05
• /
• pp.61-65
• /
• 1989

In this paper, a method of the measument the degree of the musule fatigue by Short Time Fourier Analysis of the EMG signals from human biceps in the action state is proposed. For this purpose, fatigue state and recovery state of 10 persons EMG signals are sampled. And then spectrum centroids are analyzed with respect to the change of sample time window. As result of 10 persons experiment, we know that person A is most good recovery stale.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.55-59
• /
• 2003

In this paper, we estimate the performance requirements of general-purpose DSP for Carrier Recovery of OFDM DVB-T receiver. Firstly, we transported the designed fixed-point OFDM DVB-T model to a floating-point software model written in C. Then, we measured the number of instruction cycles required for operation of Carrier Recovery in time. We use SignalMaster$\^$TM/ DSP platform of LYRtech Inc. as a environment of estimation, and Simulink$\^$TM/ as a graphical interface, Code Composer StudioTM of TI as profiler and compiler, and SPW$\^$TM/ for presenting functional reliability and comparing the performance distortion with fixed-point model. As a result, we show the required number of DSPs in our DSP-based system, and introduce the need of Multi-DSP-based system.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.166-171
• /
• 2001

A digital seismic data acquisition and processing system using a PC has been developed in order to replace the analog data acquisition system of shallow marine seismic survey. An A/D converter that has 12bits of resolution and 225KHz of conversion rate was ued to acquire data, and a data acquisition software was developed as a Windows program which provides convenience of use. Raw data acquired at field has been saved to the hard-disk simultaneously. The signal to noise ratio, vertical and horizontal resolution could be improved by a digital data processing of the raw data. The digital processing of the raw data includss gain recovery, filtering, deconvolution, and muting. With the prediction deconvolution algorithm multiple reflections appearing on the shallow marine seismic section could be removed successfully.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1819-1822
• /
• 2002

The authors propose a robust symbol timing recovery (STR) for telephone line modems supporting data rates up to 32 Mbps. The STR is initialized by a start signal from carrier sensor, and the novel method is proposed which resolves the difference between the frequency of the transmitter's clock and the receiver's clock, called baud frequency offset. The proposed method is applied on digital receiver in a 16 frequency diverse quadrature amplitude modulation (FDQAM) system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.903-907
• /
• 2002

A hyper-chaos circuit is created by applying identical n-double scrolls with weak coupled method, to each cell. Hyper-chaos synchronization was achieved using dive response synchronization between the transmitter and receiver about each state variable in the SC-CNN. From result of the recovery signal through the demodulation method in the receiver, We shown that recovery quality of state variable $\chi$$_3$ is superior to that of $\chi$$_2$,$\chi$$_1$in secure communication.